29/EDCS/2025-26

Amount

Supply of 1100 V LT armournd XLPE cable of different sizess insulated cable sizes as per T.S. and approved GTP bye Department.

3.5Cx400 sq.mmXLPE

3.5Cx240 sq.mmXLPE

3.5Cx120 sq.mmXLPE

3.5x70 sq.mm.XLPE

supply Cable end termination using total double compression brass glands and crimping type Aluminium Thimbles of different sizess insulated cable sizes as per T.S. and approved GTP by Department.

3.5C X400sq.mm

3.5C X240sq.mm

3.5Cx120 sq.mmXLPE

3.5x70 sq.mm.XLPE

Supply of LT armoured XLPE Single Core Cable of different sizes insulated cable sizes as per T.S. and approved GTP bye Department.

1x400 Sq.mm.

1x240 Sq.mm.

Supply & Erection of Al. crimping lugs of 400 sq.mm.

Supply & Erection of Al. crimping lugs of different sizes 240/120 sq.mm.

Supply & Erection of Al. crimping lugs of different sizes 70 sq.mm.

Supply AND ERECTION of Outdoor type LT Disribution Boards with a rupturing capacity of 50KA at 415V or as called for individual items (CPRI Approved manufacturer), openable in front and back suitable for 3 phase, 4 wire, 50Hz AC supply and an ambient temperature of 45 deg. C. The Cubicle should be weather proof, dust proof, vermin Proof and enclosure protection shall be IP-55 as per IS 2147-1962 and IS: 8623. The panels/switches boards shall be fabricated out of 14-SWG CRCA sheet steel and provided with 16 SWG hinged doors. MAIN LT PANEL AT SUB STATION- 400 KVA (Type A-1) Incomer- 1 Set of 800 Amp. TP MCCB with Spreader & Extended handle Metering on Incomer - 1 Set of Digital Ammeter with ASS - 1 Set of Digital Voltmeter with VSS - 1 Set of LED type Phase Indicating Light (22.5 mm.) with Control MCBs Outgoing- 6 Set of 250 Amp. TP MCCB with Spreader & Extended handle ( 5 Nos. + 1 No. for capacitor panel) - 1 Set of 100 Amp. TP MCCB with Spreader & Extended handle ( as per GTP Approved by MVVNL). All Material provided by the contractor

Supply AND ERECTION of Outdoor type LT Disribution Boards with a rupturing capacity of 50KA at 415V or as called for individual items (CPRI Approved manufacturer), openable in front and back suitable for 3 plase, 4 wire, 50Hz AC supply and an ambient temperature of 45 deg. C. The Cubicle should be weather proof, dust proof, vermin Proof and enclosure protection shall be IP-55 as per IS 2147-1962 and IS: 8623. The panels/switches boards shall be fabricated out of 14-SWG CRCA sheet steel and provided with 16 SWG hinged doors . MAIN LT PANEL AT SUB STATION- 100 KVA (Type A-5) Incomer- 1 Set of 250 Amp. TP MCCB with Spreader & Extended handle Metering on Incomer - 1 Set of Digital Ammeter with ASS - 1 Set of Digital Voltmeter with VSS - 1 Set of LED type Phase Indicating Light (22.5 mm.) with Control MCBs Outgoing- 3 Set of 63 Amp. TP MCCB with Spreader & Extended handle ( 2 Nos. + 1 No. for capacitor panel) - 3 Set of 100 Amp. TP MCCB with Spreader & Extended handle ( as per GTP Approved by MVVNL) All Material provided by the contractor

Supply , installation, testing & commissioning of Lockable distribution boxes of size 450X400mm with bus bar 100 Amp. TPN to feed upto 10 houses including structure (of MS Angle 65x65x6) for ground mounting with proper grouting (Type C) with MS Angle 65x65x6 mm for support of C-Type box ( as per GTP Approved by MVVNL) All Material provided by the contractor

Laying of following sizes of LT armoured cable for consumer connection in a manner that the unarmoured cable replaced by armoured cable to prevent theft

LT armoured cable 2x10 sq mm

LT armoured cable 4x25 sq mm

Laying of following sizes of LT armoured cable in suitable size of PVC pipe for consumer connection in a manner that the unarmoured cable replaced by armoured cable to prevent theft

LT armoured cable 2x10 sq mm

LT armoured cable 4x25 sq mm

Holding of exsting LT overhead line on exsting D/P or S/P for enabling removal of conductor on one side of LT overhead line ,its stringging on D/P or S/P .(agency also to provide temporary stay at the time of dismantaling of overhead line)

Laying of single circuit LT Armaured Xlpe cable of following sizes by digging of trench 750 mm dep 650 mm wide boxing with brick and sand, filling of trench with proper levelling and ramming.The ferruling of cable also include in this work(all the material shall be arranged by contractor)

LT 3.5x400 sq mm

LT 3.5x240 sq mm

LT 3.5x120 sq mm

LT 3.5x70 sq mm

Laying of single circuit LT Armaured Xlpe cable of following sizes in 75 mm dia sizes of fexible pipe(Pipe shall be arranged by contractor)

LT 3.5x70 sq mm

Supply of errection of 630 A MCCB as per GTP Approved

Supply of errection of 400 A MCCB as per GTP Approved

Supply of errection of 250 A MCCB as per GTP Approved

Construction of plinth suitable for following equipments with civil material as per requirement.

LT main pillar box

LT mini Pillar

Fabrication, Installation & reconectioning of C-Type Boxes support size of 7'x7' height as per diagram

Plinthing and fencing WITH TOE WALL of 400 kva

DISMANTLING WORK

Dismenteling and installation of distribution transformer with all acceseries

Opening of consumer connection from existing line and again reconnection with newly erected LT distribution box/Pillar box (necessary cable of suitable size shall be provided by contractor)

Single phase

Three phase

Well type pipe earthing depth 40 fit with GI Pipe (20 mm Dia) and 50x6 mm GI Strip with clamp. (All material provided by the contractor)

EARTHING OF C TYPE WITH MS ERATHING ROD with GI Strip 25x6 mm with clamp (All material provided by the contractor)

Back Filling and Road Restoration Charges (Kaccha Road/Pucca Road)

M/S PRAVEEN KUMAR PANDEY (BID ID -5283177)