Renovation of Panchayat Union Middle school East FACE Building at Palaiyur village in Palaiyur Panchayat

Amount

Renovation of Panchayat Union Middle school (East FACE) Building at Palaiyur village in Palaiyur Panchayat

Dismantling plain cement concrete (sch. item no. W-0034)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Pantile or Mangalore tiled roof with out roof timbers (scdl item no. W-0023)

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.

Brickwork in C.M.1:5 mix using country bricks incluidng cost and coneyance and all labuor charges etc complete

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 x 25 x 3mm at 1.419kg/m and mullion "J" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0,70kg/m at 3Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly.

Distembering with two coat using distember including cost and conveyance of all materials to site and all labour charges etc completed

Emulsion painting with two coat using emulsion including cost and conveyance of all materials to site and all labour charges etc completed

Painting two coats with approved ready mixed paint including cost and conveaynce and all labour charges etc

Black board Painting two coats with approved ready mixed paint including cost and conveaynce and all labour charges etc

Repairs to doors

Repairs to windows

Electrification - Wiring with 2 x 2.5 sqmm - LIGHT POINT SD No.20

Electrification - Wiring with 2 x 2.5 sqmm PLUG POINT SD No. 26

Electrification - Wiring with 2 x 2.5 sqmm - TUBE LIGHT FITTING SD No.88

Electrification - Wiring with 2 x 2.5 sqmm -FAN POINT SD No. 110

Towards Name Board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

DEVRIKASH (BID ID -1385785)