Karnataka

AOC

Works

Other Works

Sinking of borewell and Providing Electrification to Ramaswamy Nayaka S/o Sakriyanayaka in Basavegowdanadoddi Village In Malavalli Taluk Mandya District.alli Taluk Mandya District.

Minor Irrigation Department

Minor Irrigation Division Mandya | Mandya, Karnataka

Amount: ₹3.6 LCloses: 18 Feb 2026Closed

Timeline

Published10 Feb 2026
Closed18 Feb 2026
Awarded—

Bids

1 Bid18 Feb 2026

#	Company	Amount	Status
1	SHIVAKUMAR M ₹3.7 Laccepted-aoc	₹3.7 L	accepted-aoc

Tender Value

₹3.6 L

EMD Value

₹9,000

Closing Date

18 Feb 2026, 10:59 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Mobile Number

Work Description

Sinking of borewell and Providing Electrification

Tender Information

Tender ID

MI/2024-25/OW/WORK_INDENT4931/CALL-3

Reference Number

MI/2024-25/OW/WORK_INDENT4931/CALL-3

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredValid Registration Certificate -Contractor License

RequiredValid GST Registration Certificate

RequiredValid Turnover Certificate

RequiredName/Address/Phone Number for Communication for Proper Communication.

RequiredWork Done Certificate

RequiredValid Form-7A by Department of mines and geology/Ground Water development

RequiredBid Capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP PORTAL due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending Bidder/ Firm/ company are advised to visit the work site before submission of the tenders

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ Firm/ company authorized representative of the Bidder/ Firm/ company shall be attached while uploading bid document

If any of the dates mentioned above happens to be a general holiday, the next working day holds good

conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in the website for all modifications or corrections if any

The contractor should mention their recent correct postal address & mail address in declaration forms

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Dept

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any

Royalty charges will be deducted from contractors running bill as the per prevailing G.O.at the time of payment. Commerce and Industries Secretariat Notification No.CI 81 MMN 2014 18th February 2018 see sub rule i of rule 36 Royalty, and Mines and Geology, rules and regulations amendment Act, para 36 &para 92 of 1994 and as per the and Circular issued from Director Mines and Geology Department, Bengaluru letter no 2024 25 20 69 Dated 28 01 2025 are to be followed

Typographical errors, if any, will not be the ground for any claims by the Contractor

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification otherwise the tender will be treated as non responsive bid and rejected

Scanned signature of the Bidder/ Firm/ company authorized representative of the Bidder/ Firm/ company shall be attached while uploading bid document

Incomplete tender documents will be rejected

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

The contractor should furnish the name of the individual / Firm / company with address & telephone No with place of registration, year of incorporation etc

Original documents should be produced for verification at any stage of the tender process, as and when sought for. Failure to produce original documents will lead to disqualification. work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document

If MDP(Mineral dispatch permits) not submitted by contractors for usage of respective minerals for construction the Royalty charges will be deducted from the contactors running bill as per the direction given by concern department or government at the time of payment

The Applicant shall be registered in KPWD/CPWD and Other Public sector Organizations and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK/GOI

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:01-04-2023

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill

The agencies participating in the tender shall be registered in the Construction Labour Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labours only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deemed by the authority

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to therelevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states)

Sub-Leasing/G.P.A of Work is Prohibited

Each Item Of BOQ To be read as with all lead and lifts including loading and unloading charges and as per the direction of Engineer in charge

Uploaded drawings are for TENDER PURPOSE ONLY

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPP PORTAL on or before the last date and time of bid submission.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled

For payments related to GST,contractor should abide to prevailing FD Order no 417 EXP-12/2024 bengaluru dated 09-08-2024

The Bidder shall quote Rates WITHOUT adding GST for either materials or works Contract (Service)GST payable by the contractor under this work/contract will be paid to the contractor.

Item Rates are Exclusive of GST and amount to tender is also Exclusive of GST hence the contractor should quote his/her rate Exclusive of GST.

All other terms and conditions as per KW-1 tender documents ARE APPLICABLE

Bidder shal pay contract management Module Processing fees of 0.025% of the contract value (Minimum Rs 500 and Maximum of Rs 7500) soon after contract has been issued to bidder

Technical Criteria

Past Experience

The intending bidder Satisfactory completion as a prime contractor for at least one similar work such as Sinking/Drilling of Bore well of value not less than Rs 1.79 lakhs (Value 50% of the Estimated Cost put to tender) during the last five financial years from 2020-21 to 2024-25. An additional weightage of 10% for each year will be added to the cost of work done to bring it to the 2025-26 price level. Certificates should be obtained from the officer not below the rank of Executive Engineer or equivalent/above the rank of government department

Work Done Certificate

Capabilities of Vendor

valid Registration Certificate (Contractor License)

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

The intending bidder should have achieved in at least one financial year a minimum annual financial turnover of Rs 3.59 Lakhs (usually not less than the estimated cost under this contract for works costing up to 100 Lakhs) in the last five years period i.e. 2020-21 to 2024-25. Additional weight age at 10% for each year will be added to the financial turnover to bring it to the 2025-26 price level. Annual Turnover Certificate along with Balance sheet certified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

Audited CA Certificate of Annual Turnover

List of existing commitments and ongoing work

Others -- Others

List of works for which tenders already submitted

Others -- Others

Valid GST Registration Certificate

GST Registration

Others

Shall have valid Form-7A (approved by Department of mines and geology/Ground Water development as per Groundwater development office letter No: KGWA/GW/NOC/05/2023-24/1745 Bengaluru Dated: 24-11-2023) issued by the competent authority is to be uploaded or contractor should have MOU/Lease/Hire with the contractor having rig machine bearing form No 7A approved by competent authority and the same should be up loaded. Certificate shall have validity on the date of submission of bid. Else Tender will not be considered for Evaluation.

Others -- Form-7A issuved by Department of mines and geology/Ground Water development

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹9,000

Important Dates

Last Activity

18 Feb 2026

Published

10 Feb 2026

Bid Opening

19 Feb 2026

Download Ends

17 Feb 2026

BOQ Preview

•

Sinking of borewell and Providing Electrification to Ramaswamy Nayaka S/o Sakriyanayaka in Basavegowdanadoddi Village In Malavalli Taluk Mandya District.alli Taluk Mandya District. Reserved for Category 2A

•

code01 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o... 1.00 Each

•

code02 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

•

code03 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

•

code04 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

•

code05 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 50.00 Mtr

•

code06 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ... 10.00 Mtr

•

code07 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m... 23.00 Mtr

•

code08 Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum).... 1.00 Each

•

code09 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. - 1x3x4... 200.00 Mtr

•

code10 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am... 1.00 Each

•

code11 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ... 1.00 Each

•

code12 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar... 24.00 Each

•

code13 Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239 part-II 1991 with latest amendments if any for 50mm dia 3.00 Each

•

code14 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments of size 50mm 1.00 Each

•

code15 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap... 1.00 Job

•

code16 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a... 36.00 Mtr

•

code17 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa... 1.00 Job

•

code18 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d... 1.02 Cum

•

code19 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C... 0.38 Cum

•

code20 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)-- Platform 0.90 Cum

•

code21 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)-- Platform 0.45 Cum

•

code22 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 0.34 Cum

•

code23 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s... 1.20 Sqm

•

code24 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c... 1.00 Each

•

code25 Scraping of old paints, stains etc. and provide painting with anti-corrosive pint over a cost primer etc. with approved brand of paint and primer etc. including the cost of all materials, labour, tran... 10.36 Sqm

•

code26 RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ... 1.00 Each

•

code27 Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade - (English and Roman) 50.00 Per cm Height Per Letter

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-1-4931-Call-3-GN-Bore.doc

Tender Document • 1.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SHIVAKUMAR M

₹3.7 Laccepted-aoc