OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS.

TECHNICAL CHECKLIST SUBMISSION SHEET (https://eproc2.bihar.gov.in/EPSV2Web/)

Name of Work OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS Cost of Work as per BOQ(Rs in Lakhs) 493.34223 Time of Completion in months 60 Months ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount 49541235 Date of Sanction 09.03.2026 Last Date of Tender 03.04.2026

Sl No. Items Requirement Requirement Cl. No. Name of the contractor

Address of the contractor

1 Registration no. As per IFB & NIT

2 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days ITB 15.1 Bid validity periods In days

3 Bid Security (A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement. ITB 16.1 Amount To be entered (Rs in Lakhs)

(B) Earnest Money can be paid through Internet Payment Gateway (Credit/Debit Card), Net Banking, NEFT/RTGS in online mode. Amount To be entered (Rs in Lakhs)

Bid Security Amount - (Rs. In Lakhs) Bid Security Amount - (Rs. IN Lakhs)

4 (i) Legal Status of Bidder. ITB 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid ITB 4.2(iv)

5 Total value of Mechanical engineering work performed in last five years. 1. Annual Financial Turn Over usually not less than 50% of the estimated cost of work for which bid has been invited (achieved during any one financial year of last five financial years) (Rs in Lakhs). 4.5(A) (a)

2020 - 2021 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.08

2021 - 2022 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.17

2022 - 2023 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.26

2023- 2024 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.36

2024- 2025 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.47

6 Work Experience of Similar nature Satisfactorily completed atleast one similar work of value not less than 10% of estimated value of contract (Rs in Lakhs) 4.5(A) (b) Amount To be entered (Rs in Lakhs)

7 Eligibility Criteria Bidder must be a Manufacturer / Authorised dealer of Pumps

8 Minimum Quantities of work done as prime / Sub contractor in any one year during last five years. Items Unit Quantity ITB 4.5(A)(c)

OPERATION/MAINTENANCE/FABRICATION / ERECTION WORK OF CENTRIFUGAL PUMP SETS AND INDUCTION MOTORS INSTALLED IN THE PUMP HOUSE FOR PUMPING SCHEME & ITS ALL OTHER ALLIED COMPONENTS. (QUANTITY IS IN NOS.) Nos 2 Value to be entered in same unit

MAINTENANCE, OPERATION, ROUTINE INSPECTION, REPAIR AND SERVICING OF ALLIED ELECTRO-MECHANICAL COMPONENTS INCLUDING CONTROL PANELS, VALVES, PIPELINES AND ELECTRICAL SYSTEMS TO ENSURE SMOOTH FUNCTIONING OF THE PUMPING STATION (QUANTITY IS IN NOS. ) Nos 2

OPERATION AND MAINTENANCE OF SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION) SYSTEM FOR MONITORING AND CONTROL OF PUMP OPERATION AND RELATED ELECTRICAL/MECHANICAL PARAMETERS. (QUANTITY IS IN NOS.) Nos 2

9 Bidding Capacity: More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period ITB 4.7

(a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

10 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required Max. Age in years Nos. Required ITB 4.5(B) (a) Nos./ Max. Age

EOT / Chain Pulley Block (for lifting pump and motor during maintenance) 5

Electrical Testing Kit (Multimeter, Megger, Clamp Meter) 5

Bearing Puller and Mechanical Maintenance Tool Kit. 5

Insulation Resistance Tester / Motor Testing Equipment 5

Welding machine with gas cutting set for mechanical repair work 5

SCADA Interface Device for Monitoring and Diagnostics 5

Power Tool Kit (Drill Machine, Grinder, Cutting Tools) 5

11 Key Personnel Personnel/Qualification/Contract Package Size ITB 4.5(B) (b) Name of the Personnel and Experince in years

Site Engineer-B.E.Mechanical/Electrical+ 07 years exp.or retired A.E(Mech.) 1

Site Supervisor - Fresh Graduate in Mechanical-01 nos or Diploma Mechanical -01 nos + 03 years Exp. Or retired ITI Holder OR Fresh Graduate in Electrical-01 nos or Diploma Electrical-01 nos + 03 years Exp. Or retired ITI Holder 1

12 Evidence of accesses to Financial Resources Evidence of access to or availability of credit facilities (minimum 10% of estimated cost), certified by bankers. (Rs in Lakhs). ITB 4.2(i) Amount To be entered (Rs in Lakhs)

13 Proposed methodology and programme of work Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. ITB 4.3(l)

14 Litigation History Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. ITB 4.3(j)

15 Affidavit Affidavit should be submitted in the format as per the Annexure-3 of the Water Resources Department letter no. 536 dated 13.06.2013 . As per SBD Format

16 Undertaking Able to invest a minimum of cost upto 25% of contract value of work, during implementation of contract. ITB 4.2(ii)

17 Time of Completion 60 Months To be entered in months

18 Factory License no. & UDYAM AADHAR No.

18 Character Chertificate (As per letter no. 124 dated 04.02.2021 of WRD.)

19 I.T. & GST Registration Certificate.

20 Non Association With Departmental Officials.

21 NOC for Debar (If required)

QUALIFICATION INFORMATION

The information to be filled in by the Bidder in the following pages will be used for purposes of post qualification as provided for in Clause 4 of the Instructions to Bidders. This information will not be incorporated in the Contract.

NAME OF THE CONTRACTOR

1 For Individual Bidders

1.1 Constitution or legal status of Bidder (Attach copy)

Place of registration :

Principal place of business :

Power of attorney of signatory of Bid (Attach)

1.2 Total value of Mechanical Engineering work performed in the last five years** (in Rs. Million)

1.3.1 Work performed as prime contractor, work performed in the past as a nominated sub- contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document.

NAME OF THE CONTRACTOR

Project Name Name of the Employer* Description of work Contract No. Value of Contract (Rs. In Crore) Date of issue of work order Stipulated period of completion Actual date of completion* Remarks explaining reasons for delay & work completed)

* Attach certificate(s) from the Engineer(s)-in-Charge

** Upto last day of the month Immediately preceding the last date of bids received. (PWD letter no. 2863(E) dt. 7.6.2017

 Attach certificate from Chartered Accountant.

1.3.2 Quantities of work executed as prime contractor, work performed in the past as a nominated sub-contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document, provided further

NAME OF THE CONTRACTOR

Year Name of the work Name of the Employer* Quantity of work performed

OPERATION/MAINTENANCE/REPAIR/FABRICATION / ERECTION WORK OF CENTRIFUGAL PUMP SETS AND INDUCTION MOTORS INSTALLED IN THE PUMP HOUSE FOR IRRIGATION PUMPING SCHEME & ITS ALL OTHER ALLIED COMPONENTS. MAINTENANCE, OPERATION, ROUTINE INSPECTION, REPAIR AND SERVICING OF ALLIED ELECTRO-MECHANICAL COMPONENTS INCLUDING CONTROL PANELS, VALVES, PIPELINES AND ELECTRICAL SYSTEMS TO ENSURE SMOOTH FUNCTIONING OF THE PUMPING STATION OPERATION AND MAINTENANCE OF SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION) SYSTEM FOR MONITORING AND CONTROL OF PUMP OPERATION AND RELATED ELECTRICAL/MECHANICAL PARAMETERS. Remarks* (indicate contract Ref)

1.4 Information on Bid Capacity (works for which bids have been submitted and works which are yet to be completed) as on the date of this bid.

(A) Existing commitments and on-going works:

NAME OF THE CONTRACTOR

Description of works Place & State Contract No. Name & Address of Employer Value of Contract (Rs Cr) Stipulated Period of Completion Value of works* remaining to be completed (Rs Cr) Anticipated date of completion

* Attach certificate(s) from the Engineer(s)-in-Charge

The item of work for which data is requested should tally with that specified in ITB clause.

** Immediately preceding the financial year in which bids are received.

# Delete, if prequalification has been carried out.

(B) Works for which bids already submitted :

Description of works Place & State Name & Address of Employer Estimated value of works (Rs Cr) Stipulated period of completion Date when decision is expected Remarks, if any

1.5 Availability of key items of Contractor’s Equipment essential for carrying out the Works [Ref. Clause 4.5(B)(a)]. The Bidder should list all the information requested below. Refer also to Sub Clause 4.3 (d) of the Instruction to Bidders.

NAME OF THE CONTRACTOR

Description of works Requirement Availability proposals Remarks (from whom to be purchased)

No. Capacity Owned/Leased to be procured Nos./Capacity Age/ Condition

1.6 Qualifications and experience of key personnel required for administration and execution of the Contract [Ref. Clause 4.5(B)(b)]. Attach biographical data. Refer also to Sub Clause 4.3 (e) of instructions to Bidders and Sub Clause 9.1 of the Condition

NAME OF THE CONTRACTOR

Position Name Qualification Year of Experience (General) Years of experience in the proposed position

1.7 Proposed sub-contracts and firms involved. [Refer ITB Clause 4.3(k)]

NAME OF THE CONTRACTOR

Sanction of the works Value of Sub-contract Sub-contractor (Name & Address) Experience in similar work

Attach copies of certificates on possession of valid license for executing water supply/ sanitary work/ building electrification works [Reference Clause 4.5(d) & Clause 4.5(e)]

*1.8 Financial reports for the last five years: balance sheets, profit and loss statements, auditors' reports (in case of companies/corporation), etc. List them below and attach copies.

1.9 Evidence of access to financial resources to meet the qualification requirements: cash in hand, lines of credit, etc. List them below and attach copies of support documents.

1.10 Name, address and telephone, telex and fax numbers of the Bidders' bankers who may provide references if contacted by the Employer.

1.11Information on litigation history in which the Bidder is involved.

NAME OF THE CONTRACTOR

Other Party(ies) Employer Cause of Dispute Amount involved Remarks showing Present Status

1.12 Statement of compliance under the requirements of Sub Clause 3.2 of the instructions to Bidders. (Name of Consultant engaged for project preparation is ** ........................ …………….............................)

Proposed work method and schedule. The Bidder should attach descriptions, drawings and charts as necessary to comply with the requirements of the Bidding documents. [Refer ITB Clause 4.1 & 4.3(1)]

1.15 Quality Assurance Programme

2 Additional Requirements

2.1 Bidders should provide any additional information required to fulfill the requirements of Clause 4 of the Instructions to the Bidders, if applicable.

(ii) Undertaking

*** (iii) Update of original prequalification application

*** (iv) Copy of original prequalification application

*** (v) Copy of prequalification letter

* Delete, if prequalification has been carried out.

** Fill the Name of Consultant.

*** Delete, if prequalification has not been carried out.

Check List for Submission Of Tender

Evaluation will be done as per the information provided in the document attached with tender. Bidder may disqualified, if documents are not attached properly.

Name of the Bidder

Sl. No. Checklist Items (Attach Documents in Link Name As Given in Adjacent coloumn in Edit Attachment Folder) Link Name in Edit Attachment Document attached

1 BID SECURITY PHOTO COPY BID SECURITY PC

2 LAST 5 YEARS ANNUAL TURN OVER ANNUAL TURN OVER

3 EXPERIENCE Of SIMILAR NATURE Of W0RKS EXP SIM NAT

4 QUANTITY OF WORK EXECUTED DURING LAST 5 YEARS WORK EXE QTY

5 MANUFACTURER/ AUTHORISED DEALER CERTIFICATE/DOCUMENT RELATED CERTIFICATE/DOCUMENT

6 BALANCE VALUE OF ON GOING WORKS BAL VAL WORKS

7 EXISTING COMMITMENTS EXIST COMT

8 BANKER'S CERTIFICATE FOR ACCESS OF FINACIAL RESOURCES BANK CER

9 AFFIDAVIT AFFIDAVIT

10 UNDERTAKING FOR BID VALIDITY, INVESTMENT ABILITY, NON ASSOCIATION WITH OFFICIALS. UNDERTAKING

11 LITIGATION HISTORY LIT HIS

12 PLANT and MACHINARIES PT & MAC

13 KEY PERSONNEL KEY PER

14 Registration REGISTRATION

15 Power of Attoney POW AT

16 Legal Status Of Bidder LEGAL

17 PROGRAMME Of WORKS PROG WORK

18 IT & ST REGISTRATION and CLEARANCE CERTIFICATE IT GST CLEARANCE

19 NOC FOR DEBAR DEBAR

20 Proposal of sub-Contract SUB-CONTRACT

21 Joint Venture JV

22 Factory License no. & UDYAM AADHAR NO. FL & UA

23 NON ASSCIATION WITH DEPARMENTAL OFFICIALS NADO

24 PAN & GST REGISTRATION P&GST

25 Character Chertificate CC

IF YOU HAVE NOT BEEN DEBARED WRITE "NOT APPLICABLE" IN YOUR LETTER HEAD SCAN AND UPLOAD IN THE IN NOC FOR DEBAR LINK

Note:-Attachment should be self attested and should be attached as per above instruction, otherwise it may be rejected.

I, the undersigned, do hereby certify that all the statements made in the required attachments are true and correct.

Signature & Seal of the Bidder

Sl. Description Qty. Unit Rate Amount

Repair of horizontal split casing centrifugal pump (capacity 60 cusec ,Head 29 M) 1

1 Centrifugal Pump with Motor:- Supplyof Horizontal Split casing Centrigual pump set with 2 % NICI Casing, SSCF8M impeller and driven for 3 phase 6.6 KV , 750 RPM , 50 HZ AC Flange mounted spirrel cage induction motor having TEFC enclousre as per specification . The scope also include all required accessories Bell mouth, foundation bolt base plate , coupling & coupling guard and companion flange (capacity 60 cusec ,head,29 M, 6.6 KV 900 HP /750 RPM Electric Motor. 4 Each

Repair of double flanged electrically operated C.I. Sluice valve

Size-1200 mm NB of suction side. 1

Size 900 mm NB on deliver side. 1

2 Sluice Valve:-Supplying of double flanged electrically operated C.I. Sluice valve conforming to relevant latest IS of P.N. 1.0 rating . Per Cft.

(ii) Size-1200 mm NB of suction side. 4 Each

(iii) Size 900 mm NB on deliver side. 4 Each

Repair of multi door flanged non return valve conforming to relevant/latest IS 900 mm 1

3 Non Return Valve:- Supply of multi door flanged non return valve conforming to relevant/latest IS 900 mm 4 Each

Repair of double active Kinetic Air release Valve size -200 mm 1

4 Air Valve :- Supply of double active Kinetic Air release Valve size -200 mm . 4 Each

5 MS PIPE:-Manufacturing , Faluation , suplyin laying with welded joints, leading , Painting and horing & Commissioning of MS Pipe conforming to I 12393589 fabricated from M.S. Plate of Sail, JiNDAL, conforming to IS 2062 . Necessary civil suppor and anchoring shall also be included in the scope of bidder including the cost of dismentalling of existing old delivery pipe & road crossing work for laying new pipe line in delivery side.

(i) Size 1200 mm -10 mm thick ( suction side ) 40 meter

(ii) Size 900 mm NB-8 mm thick ( Delivery side ) 800 meter

6 Manufacturing , Fabrication , suply, penting , Installation , Testing , painting & commissioning of MS specials like reducers enlarge , load etc of required size; 1 lot

7 Manufacturing , Fabrication , suply, painting , Installation , Testing , pedning & commissioning of MS Flange conforming to IS 1538 Lable Va & VI with flat face, off centre bolt holes & as per site requirement.

(i) Size 1200 mm ( (Suction siide) 20 Each

(ii) Size -900 mm ( Delivery Side) 60 Each

Repair of Metalic S.S. Expansion belows

Size -900 mm ( on Pump Delivery ) 1

Size-900 mm (On Pipe line ) 1

8 Supply of Metalic S.S. Expansion belows confirming to Relevant standered with PN 1.0 rating withall necessary hardwares.

(i) Size -900 mm ( on Pump Delivery ) 4

(ii) Size-900 mm (On Pipe line ) 4

Repair of electromagnetic type Flowmeter with its accessories 1

9 Flowmeter:-Supply of full bore electromagnetic type Flowmeter with indicator , transmitter , totalise and signed cable and necessary harwares etc. 4

Repair of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder 1

10 EOT Crane :-Supply of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder and all necessary accessories. 2

11 Supply of 33 KV M.S. two pole structure with all accessories including Poles etc. fencing and CI PI units as per BST B requirement with all accessories as per E.I.

12 TRANSFORMER:-(I)Supply of power Transformer of 33 KV 6.6 KV, 3.0 MVA, DYN -H ONAN with off load tap changer.

(ii) Supply of Auxillaary Tranformer of 6.6 KV 440V, 250 KVA , DyN -11 ONAN with off load tap changer.

13 H.T. PANNEL:-Supply of 33 KVA of required MVA and required current rating VCB HT Pannel set comprising of 5 Nos. pannel board 02 No incomming -2 Nos. outgong Bus coupler.

(ii) Supply of 6.6 KVA of required MV A and required current ratign VCB H T Pannel set comprising of 10Nos. Panlel 12 Nos. incoming , 5 nos. outgoning ( 4 nos. for motors and 1 No for auxillary transformer ) + 1 No Bus coupler + 2 nos. Bus PI feder. )

14 CAPACITOR BANK -Supply of 6.6 KV HT. suitable capacitor bank pannel with on load brek switch for above .

15 FCMA TYPE REACTOR type soft starter.

(i) Supply of 33 KV , 3C-400 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(ii) Supply of 6.6 KV , 3C-300 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(iii) Supply of 1.1 KV suitable size AYFY YWY able of suitable size where ever applicable.

(iv) Supply of control cable for Flowmeter and auxillary eqipment.

(v) Cable try III & IT cable as per site requirement .

17 Cable Termination:-

(i) Supply of 33 KV Termination

(ii) Supply of 6.6 KV Termination

(iii) Supply of 1.1 KV Termination

18 BATTERY AND BATTERY CHARGER PANEL

Supply of 110 V 200 All Battery with Float Cum Boost charger with DC DB for suitable operation.

19 EF MCC Pannel

Supply of LT Mec Panel of suitable rating and capacity for Auxillary powr supply.

20 ISH RNAI LIGHTING & Internal lighting.

Suply of suitable general lighting arrangement inside & our side the pump house and floir four pole structure.

Supply of G.I. Plate type earthing with necessary G.I. Strips as per Flowmeter.

22 PRESSURE GUAGE

Supply , Installation , Testing and commissioning of 150 mm nDial foundation type pressure guage with isolation valve & SS Tabling with all accessories and hardwares.

23 Dewatering PUMP:- Supply of non summerible type dewatering pump with starter pannel delivery pipe and cable up to sharter pannel with all acceesories.

Capicity 50 M P/Hour.

Supply of vaccum pump of 15 HP Capacity with starter , Cable Pipe etc. all accessories.

25 Safety accessories as per E.I. requirement like rubber mat, and First Aid Box . Shock treatment chart.

26 ERECTION AND COMMISSIONING

(i) Pump & Motor.

(ii) 1200 mm Sluice Valve

(iii) 900 mm Sluice Valve

(iv) 900 mm NRV

(v) 900 mm Air Release Valve.

(vi) 900 mm Expansion Bewllows && MS specials.

(vii) Flowmeter

(viii) NH Crane

(ix) KV Low pole structure.

(x) MVA Power Transformer with foundation .

(xi) 900 KVA Power Transformer with foundation .

(xii) KV HT Pannel

(xiii) KV HT Pannel

(xv) 900 HP MA Soft starter.

( xvi) Control Cable

(xvii) KV HT Cable.

(xviii) KV HT Cable with tray.

(xix) KV HT Cable with tray.

(xx) 33 KV Temination.

(xxi) 6.6 KV Termination.

(xxii) 1.1 KV Termination.

(xxiii) Battery and Battery Charger.

(xxiv) HT Panel

(xxv) Internal and External lighting

(xxvi) Earthing

(xxvii) Pressure Guage

(xxviii) Dewatering Pump

(xxix) Vaccum Pump

(xxx) Safty accessories.

(xxxi) Operation maintenance.

ESTIMATE FOR OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT FOR FIVE YEARS

DETAILS OF OPERATION & MAINTENACE FOR SUPPLY FITTING & FIXING OF CONSUMABLE MATERIALS & MINOR REPAIR OF CHAUSA PUMP HOUSE

A. MECHANICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVERY SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS EACH

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GREASE 214 PER KG

9 MOBIL (7 LITER X 8 MONTH) 56 PER LITER

10 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 240 PER KG

11 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 50 PER KG

12 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 50 PER KG

13 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 40 PER KG

14 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 27 PER KG

15 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 16 EACH

16 DISTILLED WATER 60 PER LITER

17 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 60 PER KG

18 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 27 PER KG

19 COTTON WASTE 5KG PER MONTH FOR 8 MONTHS 40 PER KG

20 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 14 PER KG

21 MINOR REPAIR OF REFLUX VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT 2 EACH

22 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

23 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 2 EACH

24 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 4 EACH

25 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS

26 CONSUMPTION OF DIESEL 347 PER LITER

27 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

28 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 2 EACH

29 GEAR OIL FOR EOT CRANE 20 PER LITER

30 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 2 EACH

31 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS

32 LIMIT SWITCH REPAIRING 2 EACH

33 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 2 PER JOB

34 CHECK VALVE 1 EACH

35 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 20 PER METER

36 BATTERY CHARGER REPAIRING WITH ALL LABOUR & MATERIALS 1 EACH

37 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 2 EACH

38 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

39 S.F.F OF SAFETY BELT FOR CRANE WORK 2 EACH

40 REFILLING OF FIRE EXTINGUISHER CYLINDER 4 EACH

41 REPAIR OF PRESSURE GAUGE WITH SPARE PARTS

B. ELECTRICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR AND CHANGING OF TRANSFORMER OIL

I FOR POWER TRANSFORMER (11KV/6.6KV, 3.0 MVA) 2

II FOR TRANSFPRMER OIL OF AUXILLARY TRANSFORMER (250KVA) 1

2 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS

I FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1

II FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1

3 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1

4 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER 1

5 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS

6 REPAIR OF L.T. PANNEL WITH SPARE PARTS

7 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE

8 PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC.

9 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS

10 REPAIR & MAINTENANCE OF 62.5kVA DG SET

11 REPAIR OF 6.6 kV TRANSFORMER FEEDER

12 REPAIR OF 6.6 kV MOTOR FEEDER

13 REPAIR OF 6.6 kV BUS PT

14 REPAIR OF 6.6 kV INCOMER

15 REPAIR OF 6.6 kV BUS COUPLER

C. SCADA SYSTEM

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE)

2 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS

3 REPAIR AND UPDATETION OF SCADA SOFTWARE

4 REPAIR AND MAINTENANCE OF COMPUTER

5 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS

6 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS

7 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS

8 INTERNET/WIFI FOR SCADA SYSTEM

9 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS

10 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd.

11 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS

12 REPAIR OF 250VA CONTROL TRANSFORMER

13 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS

D. TECHNICAL / NON- TECHNICAL LABOUR

S.N. TYPE OF STAFF NO. PER SHIFT NO. OF SHIFT TOTAL AVAILABLE PERIOD RATE

1 PUMP OPERATOR Gr.-1 1 3 3 250

2 SCADA OPERATOR 2 3 6 250

3 HELPER 2 3 6 250

4 ORDINARY LABOUR 1 3 3 250

5 ELECTRICIAN 1 - 1 365

6 MECHANIC 1 - 1 250

7 SWEEPER 1 - 1 365

8 WATCHMAN 1 3 3 365

IN GENERAL SEASON

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 1 1 637 16562

2 Data Entry Operator 1 1 1 536 13936

3 Supervisor (Diploma in Engineering) 1 1 1 660 17160

4 Pump Operator Grade - I 1 1 1 541 14066

5 Mechanic Grade - I 1 1 1 660 17160

6 Electrician Grade - I 1 1 1 660 17160

TOTAL AMOUNT PER MONTH = 107172

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 123247.8

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 129410.19

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 135880.6995

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 142674.7345

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 149808.4712

DURING IRRIGATION PERIOD

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 2 2 637 33124

2 Data Entry Operator 1 2 2 536 27872

3 Pump Operator Grade - I 1 2 2 541 28132

4 Crane Operator Grade - II 1 1 1 541 14066

TOTAL AMOUNT PER MONTH = 137826

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 158499.9

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 166424.895

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 174746.13975

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 183483.4467

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 192657.6191

S.N. DESCRIPTION QUANTITY UNIT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVER SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS WITH SPARE PARTS

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES 1 EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 1 PER KG

9 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 1 PER KG

10 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 1 PER KG

11 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 1 PER KG

12 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 1 PER KG

13 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 1 EACH

14 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 1 PER KG

15 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 1 PER KG

16 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 1 PER KG

17 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

18 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 1 EACH

19 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

20 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

21 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

22 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 1 EACH

23 GEAR OIL FOR EOT CRANE 1 PER LITER

24 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 1 EACH

25 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS 1 EACH

26 LIMIT SWITCH REPAIRING 1 EACH

27 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 1 PER JOB

28 REPAIR OF CHECK VALVE 1 EACH

29 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 1 PER METER

30 BATTERY CHARGER REPAIRING WITH SPARE PARTS 1 EACH

31 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 1 EACH

32 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

33 S.F.F OF SAFETY BELT FOR CRANE WORK 1 EACH

34 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS 1 EACH

35 FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH

36 FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH

37 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1 EACH

38 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER WITH SPARE PARTS 1 EACH

39 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS 1 EACH

40 REPAIR OF L.T. PANNEL WITH SPARE PARTS 1 EACH

41 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE 1 EACH

42 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS 1 EACH

43 REPAIR & MAINTENANCE OF 62.5kVA DG SET 1 EACH

44 REPAIR OF 6.6 kV TRANSFORMER FEEDER 1 EACH

45 REPAIR OF 6.6 kV MOTOR FEEDER 1 EACH

46 REPAIR OF 6.6 kV BUS PT 1 EACH

47 REPAIR OF 6.6 kV INCOMER 1 EACH

48 REPAIR OF 6.6 kV BUS COUPLER 1 EACH

49 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) 1 EACH

50 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS 1 EACH

51 REPAIR AND UPDATETION OF SCADA SOFTWARE 1 EACH

52 REPAIR AND MAINTENANCE OF COMPUTER 1 EACH

53 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS 1 EACH

54 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS 1 EACH

55 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS 1 EACH

56 INTERNET/WIFI FOR SCADA SYSTEM 1 EACH

57 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS 1 EACH

58 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. 1 EACH

59 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS 1 EACH

60 REPAIR OF 250VA CONTROL TRANSFORMER 1 EACH

61 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS 1 EACH

BILL OF QUANTITY

NAME OF WORK : OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS

A. DETAILS OF OPERATION & MAINTENANCE WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 Provision for Technical /Skilled/Helper etc. Man power for General maintenance as well as Repair of Pumps and theirs parts & other incidental works in general Season, as well as in Irrigation Season for Smooth Running & Operation of Pumps as per the direction of E/I.

(I) For First Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 123247.8 1478973.6

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 158499.9 1374194.133

(I) For Second Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 129410.19 1552922.28

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 166424.895 1442903.84

(I) For Third Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 135880.6995 1630568.394

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 174746.13975 1515049.032

(I) For Fourth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 142674.7345 1712096.8137

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 183483.4467 1590801.483

(I) For Fifth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 149808.4712 1797701.654

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 192657.6191 1670341.557

B. DETAILS OF MECHANICAL WORK

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 265000 530000

2 PROVISION FOR REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE-1200 MM NB OF SUCTION SIDE 5 EACH 67000 335000

b SIZE-900 MM NB OF SUCTION SIDE 6 EACH 79625 477750

3 PROVISION FOR REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 20200 40400

4 PROVISION FOR REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 16500 33000

5 PROVISION FOR REPAIR OF METALIC S.S. EXPANSION BELOWS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE -900 MM ( ON PUMP DELIVERY ) 2 EACH 17300 34600

b SIZE-900 MM (ON PIPE LINE ) 2 EACH 16300 32600

6 PROVISION FOR REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 4 EACH 13900 55600

7 PROVISION FOR REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 45850 45850

8 PROVISION FOR GREASE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 225 kG 350 78750

9 PROVISION FOR MOBIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 280 LITER 350 98000

10 PROVISION FOR GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 250 kG 2210 552500

11 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 50 kG 1680 84000

12 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 50 kG 2120 106000

13 PROVISION FOR DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 270 10800

14 PROVISION FOR RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 25 kG 400 10000

15 PROVISION FOR SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 1175 29375

16 PROVISION FOR DISTILLED WATER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 60 LITER 17 1020

17 PROVISION FOR S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 60 kG 555 33300

18 PROVISION FOR RUBBER GASKIT NYLON THREAD FOR N/R VALVE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 30 kG 590 17700

19 PROVISION FOR COTTON WASTE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 115 4600

20 PROVISION FOR GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 20 kG 1170 23400

21 PROVISION FOR MINOR REPAIR OF CHECK VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 19700 39400

22 PROVISION FOR REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 42875 42875

23 PROVISION FOR REPAIRING OF VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 18000 18000

24 PROVISION FOR REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 35500 35500

25 PROVISION FOR REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 155000 465000

26 PROVISION FOR CONSUMPTION OF DIESEL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 350 LITER 92 32200

27 PROVISION FOR REPAIRING OF DEWATERING MOTOR WITH HEATING AND WARNISHING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 16600 16600

28 PROVISION FOR REPAIRING OF DEWATERING PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 12400 12400

29 PROVISION FOR CONSUMPTION OF GEAR OIL FOR EOT CRANE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 LITER 190 4750

30 PROVISION FOR STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 21700 21700

31 PROVISION FOR REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 22370 22370

32 PROVISION FOR LIMIT SWITCH REPAIRING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 11980 23960

33 PROVISION FOR PLASTIC SEAT COVERING OF MOTOR & PANEL ETC COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 3700 92500

34 PROVISION FOR REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 3800 3800

35 PROVISION FOR S.F.F BREAK KIT OF CRANE WITH ACCESSORIES COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 7900 7900

36 PROVISION FOR S.F.F OF SAFETY BELT FOR CRANE WORK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 6550 13100

37 PROVISION FOR REFILLING OF FIRE EXTINGUISHER CYLINDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 4 EACH 10494 41976

38 PROVISION FOR REPAIR OF PRESSURE GAUGE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 4500 9000

TOTAL = 3537276

C. DETAILS OF ELECTRICAL WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR AND CHANGING OF TRANSFORMER OIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a Power Transformer (11KV/6.6KV, 3.0 MVA) 30 KL 83266 2497980

b Auxillary Transformer (6.6KV, 250V KVA) 12.5 KL 83266 1040825

c FILTARATION OF OIL ,IF M/C PROVIDED BY FIRM 42.5 LITER 7 297.5

2 PROVISION FOR REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a 11KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 6 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH 386000 386000

b 6.6KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 9 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH 386000 386000

3 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 2 EACH 78500 157000

4 PROVISION FOR REPAIR & MAINTENANCE OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 85000 255000

5 PROVISION FOR REPAIR & MAINTENANCE OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 6500 6500

6 PROVISION FOR REPAIR & MAINTENANCE OF L.T. PANNEL WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 135600 135600

7 PROVISION FOR REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 218500 1092500

8 PROVISION FOR PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 9252 46260

9 PROVISION FOR REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 5 JOB 205000 1025000

10 PROVISION FOR REPAIR & MAINTENANCE OF 62.5kVA DG SET COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 52500 262500

11 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV TRANSFORMER FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 287875 287875

12 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV MOTOR FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 386000 386000

13 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS PT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 224500 224500

14 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV INCOMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 237000 237000

15 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS COUPLER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 155000 155000

D. DETAILS OF SCADA WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR & MAINTENANCE OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 195900 195900

2 PROVISION FOR REPAIR & MAINTENANCE OF PLC CABLE AS PER SITE SPECIFICATIONS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 2750 2750

3 PROVISION FOR REPAIR & MAINTENANCE AND UPDATETION OF SCADA SOFTWARE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 95700 95700

4 PROVISION FOR REPAIR & MAINTENANCE OF COMPUTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 48500 97000

5 PROVISION FOR REPAIR & MAINTENANCE OF WATER LEVEL SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52200 104400

6 PROVISION FOR REPAIR & MAINTENANCE OF TEMPERATURE SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52500 105000

7 PROVISION FOR REPAIR & MAINTENANCE OF PRESSURE TRANSMITTER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 31700 63400

8 PROVISION FOR INTERNET/WIFI COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 30000 150000

9 PROVISION FOR REPAIR & MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTSCOMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 48400 48400

10 PROVISION FOR REPAIR & MAINTENANCE OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 95000 95000

11 PROVISION FOR REPAIR & MAINTENANCE OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 69000 69000

12 PROVISION FOR REPAIR & MAINTENANCE OF 250VA CONTROL TRANSFORMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 65500 65500

13 PROVISION FOR REPAIR & MAINTENANCE OF MULTIFUNCTION METER WITH ITS SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 13200 13200

TOTAL = 1105250

E. DETAILS OF OTHER IMPORTANT WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 SUPPLYING , INSTALLATION, TESTING AND COMMISSIONING OF ONE PASSENGER LIFT INCLUDING ALL NECESSARY CIVIL AND ELECTRICAL WORK AT CHAUSA PUMP CANAL 1 JOB 2133440 2133440

2 PROVISION FOR PAINTING OF PUMPS, MOTOR,VALVES, BASEPLATES, SLUICE VALVE. AND ALL COMPLETE JOB PIPE LINE AFTER CLEANING, SAND BLASTING AND DE-RUSTING THEM PROPERLY AND DOING TWO COATS OF PAINT OVER ONE COAT OF PRIMER ALL COMPLETE WITH LABOUR AND MATERIALS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 1057000 2114000

TOTAL = 4247440

F. DETAILS OF SPARE PARTS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 COUPLING FOR PUMP 6 EACH 28300 169800

2 COUPLING BOLTS 100 EACH 184 18400

3 ACTUATOR 6 EACH 1041 6246

4 GATE FOR SLUICE VALVE 5 EACH 252000 1260000

5 GASKET 20 EACH 700 14000

6 BEARING 8 EACH 105000 840000

7 BEARING RETAINER 8 EACH 28000 224000

8 BEARING HOUSE 8 EACH 315000 2520000

9 IMPELLER RING 4 EACH 26700 106800

10 IMPELLER KEY 6 EACH 14800 88800

11 CASING RING 4 EACH 115000 460000

12 CASING RING PIN 4 EACH 48200 192800

13 SHAFT EXTENSION KEY 6 EACH 25700 154200

14 SHAFT 4 EACH 248000 992000

15 COUPLING BUSH 6 EACH 48000 288000

16 BATTERY & BATTERY CHARGER 2 EACH 411157 822314

TOTAL = 8157360

TOTAL A+B+C+D+E+F = 41394716.29

TOTAL Rs. = 41808663.45

Total Rs. = 49334222.87

Executive Engineer (M), Irrigation Electrical cum Mechanical Division Walmi Patna

J.E (M) A.E. (M)

Sl. Description Qty. Unit Rate Amount

Repair of horizontal split casing centrifugal pump (capacity 60 cusec ,Head 29 M) 1

1 Centrifugal Pump with Motor:- Supplyof Horizontal Split casing Centrigual pump set with 2 % NICI Casing, SSCF8M impeller and driven for 3 phase 6.6 KV , 750 RPM , 50 HZ AC Flange mounted spirrel cage induction motor having TEFC enclousre as per specification . The scope also include all required accessories Bell mouth, foundation bolt base plate , coupling & coupling guard and companion flange (capacity 60 cusec ,head,29 M, 6.6 KV 900 HP /750 RPM Electric Motor. 4 Each

Repair of double flanged electrically operated C.I. Sluice valve

Size-1200 mm NB of suction side. 1

Size 900 mm NB on deliver side. 1

2 Sluice Valve:-Supplying of double flanged electrically operated C.I. Sluice valve conforming to relevant latest IS of P.N. 1.0 rating . Per Cft.

(ii) Size-1200 mm NB of suction side. 4 Each

(iii) Size 900 mm NB on deliver side. 4 Each

Repair of multi door flanged non return valve conforming to relevant/latest IS 900 mm 1

3 Non Return Valve:- Supply of multi door flanged non return valve conforming to relevant/latest IS 900 mm 4 Each

Repair of double active Kinetic Air release Valve size -200 mm 1

4 Air Valve :- Supply of double active Kinetic Air release Valve size -200 mm . 4 Each

5 MS PIPE:-Manufacturing , Faluation , suplyin laying with welded joints, leading , Painting and horing & Commissioning of MS Pipe conforming to I 12393589 fabricated from M.S. Plate of Sail, JiNDAL, conforming to IS 2062 . Necessary civil suppor and anchoring shall also be included in the scope of bidder including the cost of dismentalling of existing old delivery pipe & road crossing work for laying new pipe line in delivery side.

(i) Size 1200 mm -10 mm thick ( suction side ) 40 meter

(ii) Size 900 mm NB-8 mm thick ( Delivery side ) 800 meter

6 Manufacturing , Fabrication , suply, penting , Installation , Testing , painting & commissioning of MS specials like reducers enlarge , load etc of required size; 1 lot

7 Manufacturing , Fabrication , suply, painting , Installation , Testing , pedning & commissioning of MS Flange conforming to IS 1538 Lable Va & VI with flat face, off centre bolt holes & as per site requirement.

(i) Size 1200 mm ( (Suction siide) 20 Each

(ii) Size -900 mm ( Delivery Side) 60 Each

Repair of Metalic S.S. Expansion belows

Size -900 mm ( on Pump Delivery ) 1

Size-900 mm (On Pipe line ) 1

8 Supply of Metalic S.S. Expansion belows confirming to Relevant standered with PN 1.0 rating withall necessary hardwares.

(i) Size -900 mm ( on Pump Delivery ) 4

(ii) Size-900 mm (On Pipe line ) 4

Repair of electromagnetic type Flowmeter with its accessories 1

9 Flowmeter:-Supply of full bore electromagnetic type Flowmeter with indicator , transmitter , totalise and signed cable and necessary harwares etc. 4

Repair of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder 1

10 EOT Crane :-Supply of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder and all necessary accessories. 2

11 Supply of 33 KV M.S. two pole structure with all accessories including Poles etc. fencing and CI PI units as per BST B requirement with all accessories as per E.I.

12 TRANSFORMER:-(I)Supply of power Transformer of 33 KV 6.6 KV, 3.0 MVA, DYN -H ONAN with off load tap changer.

(ii) Supply of Auxillaary Tranformer of 6.6 KV 440V, 250 KVA , DyN -11 ONAN with off load tap changer.

13 H.T. PANNEL:-Supply of 33 KVA of required MVA and required current rating VCB HT Pannel set comprising of 5 Nos. pannel board 02 No incomming -2 Nos. outgong Bus coupler.

(ii) Supply of 6.6 KVA of required MV A and required current ratign VCB H T Pannel set comprising of 10Nos. Panlel 12 Nos. incoming , 5 nos. outgoning ( 4 nos. for motors and 1 No for auxillary transformer ) + 1 No Bus coupler + 2 nos. Bus PI feder. )

14 CAPACITOR BANK -Supply of 6.6 KV HT. suitable capacitor bank pannel with on load brek switch for above .

15 FCMA TYPE REACTOR type soft starter.

(i) Supply of 33 KV , 3C-400 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(ii) Supply of 6.6 KV , 3C-300 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(iii) Supply of 1.1 KV suitable size AYFY YWY able of suitable size where ever applicable.

(iv) Supply of control cable for Flowmeter and auxillary eqipment.

(v) Cable try III & IT cable as per site requirement .

17 Cable Termination:-

(i) Supply of 33 KV Termination

(ii) Supply of 6.6 KV Termination

(iii) Supply of 1.1 KV Termination

18 BATTERY AND BATTERY CHARGER PANEL

Supply of 110 V 200 All Battery with Float Cum Boost charger with DC DB for suitable operation.

19 EF MCC Pannel

Supply of LT Mec Panel of suitable rating and capacity for Auxillary powr supply.

20 ISH RNAI LIGHTING & Internal lighting.

Suply of suitable general lighting arrangement inside & our side the pump house and floir four pole structure.

Supply of G.I. Plate type earthing with necessary G.I. Strips as per Flowmeter.

22 PRESSURE GUAGE

Supply , Installation , Testing and commissioning of 150 mm nDial foundation type pressure guage with isolation valve & SS Tabling with all accessories and hardwares.

23 Dewatering PUMP:- Supply of non summerible type dewatering pump with starter pannel delivery pipe and cable up to sharter pannel with all acceesories.

Capicity 50 M P/Hour.

Supply of vaccum pump of 15 HP Capacity with starter , Cable Pipe etc. all accessories.

25 Safety accessories as per E.I. requirement like rubber mat, and First Aid Box . Shock treatment chart.

26 ERECTION AND COMMISSIONING

(i) Pump & Motor.

(ii) 1200 mm Sluice Valve

(iii) 900 mm Sluice Valve

(iv) 900 mm NRV

(v) 900 mm Air Release Valve.

(vi) 900 mm Expansion Bewllows && MS specials.

(vii) Flowmeter

(viii) NH Crane

(ix) KV Low pole structure.

(x) MVA Power Transformer with foundation .

(xi) 900 KVA Power Transformer with foundation .

(xii) KV HT Pannel

(xiii) KV HT Pannel

(xv) 900 HP MA Soft starter.

( xvi) Control Cable

(xvii) KV HT Cable.

(xviii) KV HT Cable with tray.

(xix) KV HT Cable with tray.

(xx) 33 KV Temination.

(xxi) 6.6 KV Termination.

(xxii) 1.1 KV Termination.

(xxiii) Battery and Battery Charger.

(xxiv) HT Panel

(xxv) Internal and External lighting

(xxvi) Earthing

(xxvii) Pressure Guage

(xxviii) Dewatering Pump

(xxix) Vaccum Pump

(xxx) Safty accessories.

(xxxi) Operation maintenance.

ESTIMATE FOR OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT FOR FIVE YEARS

DETAILS OF OPERATION & MAINTENACE FOR SUPPLY FITTING & FIXING OF CONSUMABLE MATERIALS & MINOR REPAIR OF CHAUSA PUMP HOUSE

A. MECHANICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVERY SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS EACH

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GREASE 214 PER KG

9 MOBIL (7 LITER X 8 MONTH) 56 PER LITER

10 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 240 PER KG

11 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 50 PER KG

12 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 50 PER KG

13 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 40 PER KG

14 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 27 PER KG

15 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 16 EACH

16 DISTILLED WATER 60 PER LITER

17 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 60 PER KG

18 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 27 PER KG

19 COTTON WASTE 5KG PER MONTH FOR 8 MONTHS 40 PER KG

20 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 14 PER KG

21 MINOR REPAIR OF REFLUX VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT 2 EACH

22 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

23 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 2 EACH

24 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 4 EACH

25 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS

26 CONSUMPTION OF DIESEL 347 PER LITER

27 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

28 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 2 EACH

29 GEAR OIL FOR EOT CRANE 20 PER LITER

30 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 2 EACH

31 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS

32 LIMIT SWITCH REPAIRING 2 EACH

33 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 2 PER JOB

34 CHECK VALVE 1 EACH

35 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 20 PER METER

36 BATTERY CHARGER REPAIRING WITH ALL LABOUR & MATERIALS 1 EACH

37 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 2 EACH

38 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

39 S.F.F OF SAFETY BELT FOR CRANE WORK 2 EACH

40 REFILLING OF FIRE EXTINGUISHER CYLINDER 4 EACH

41 REPAIR OF PRESSURE GAUGE WITH SPARE PARTS

B. ELECTRICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR AND CHANGING OF TRANSFORMER OIL

I FOR POWER TRANSFORMER (11KV/6.6KV, 3.0 MVA) 2

II FOR TRANSFPRMER OIL OF AUXILLARY TRANSFORMER (250KVA) 1

2 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS

I FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1

II FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1

3 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1

4 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER 1

5 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS

6 REPAIR OF L.T. PANNEL WITH SPARE PARTS

7 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE

8 PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC.

9 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS

10 REPAIR & MAINTENANCE OF 62.5kVA DG SET

11 REPAIR OF 6.6 kV TRANSFORMER FEEDER

12 REPAIR OF 6.6 kV MOTOR FEEDER

13 REPAIR OF 6.6 kV BUS PT

14 REPAIR OF 6.6 kV INCOMER

15 REPAIR OF 6.6 kV BUS COUPLER

C. SCADA SYSTEM

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE)

2 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS

3 REPAIR AND UPDATETION OF SCADA SOFTWARE

4 REPAIR AND MAINTENANCE OF COMPUTER

5 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS

6 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS

7 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS

8 INTERNET/WIFI FOR SCADA SYSTEM

9 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS

10 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd.

11 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS

12 REPAIR OF 250VA CONTROL TRANSFORMER

13 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS

D. TECHNICAL / NON- TECHNICAL LABOUR

S.N. TYPE OF STAFF NO. PER SHIFT NO. OF SHIFT TOTAL AVAILABLE PERIOD RATE

1 PUMP OPERATOR Gr.-1 1 3 3 250

2 SCADA OPERATOR 2 3 6 250

3 HELPER 2 3 6 250

4 ORDINARY LABOUR 1 3 3 250

5 ELECTRICIAN 1 - 1 365

6 MECHANIC 1 - 1 250

7 SWEEPER 1 - 1 365

8 WATCHMAN 1 3 3 365

IN GENERAL SEASON

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 1 1 637 16562

2 Data Entry Operator 1 1 1 536 13936

3 Supervisor (Diploma in Engineering) 1 1 1 660 17160

4 Pump Operator Grade - I 1 1 1 541 14066

5 Mechanic Grade - I 1 1 1 660 17160

6 Electrician Grade - I 1 1 1 660 17160

TOTAL AMOUNT PER MONTH = 107172

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 123247.8

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 129410.19

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 135880.6995

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 142674.7345

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 149808.4712

DURING IRRIGATION PERIOD

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 2 2 637 33124

2 Data Entry Operator 1 2 2 536 27872

3 Pump Operator Grade - I 1 2 2 541 28132

4 Crane Operator Grade - II 1 1 1 541 14066

TOTAL AMOUNT PER MONTH = 137826

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 158499.9

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 166424.895

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 174746.13975

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 183483.4467

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 192657.6191

S.N. DESCRIPTION QUANTITY UNIT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVER SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS WITH SPARE PARTS

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES 1 EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 1 PER KG

9 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 1 PER KG

10 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 1 PER KG

11 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 1 PER KG

12 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 1 PER KG

13 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 1 EACH

14 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 1 PER KG

15 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 1 PER KG

16 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 1 PER KG

17 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

18 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 1 EACH

19 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

20 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

21 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

22 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 1 EACH

23 GEAR OIL FOR EOT CRANE 1 PER LITER

24 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 1 EACH

25 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS 1 EACH

26 LIMIT SWITCH REPAIRING 1 EACH

27 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 1 PER JOB

28 REPAIR OF CHECK VALVE 1 EACH

29 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 1 PER METER

30 BATTERY CHARGER REPAIRING WITH SPARE PARTS 1 EACH

31 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 1 EACH

32 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

33 S.F.F OF SAFETY BELT FOR CRANE WORK 1 EACH

34 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS 1 EACH

35 FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH

36 FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH

37 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1 EACH

38 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER WITH SPARE PARTS 1 EACH

39 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS 1 EACH

40 REPAIR OF L.T. PANNEL WITH SPARE PARTS 1 EACH

41 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE 1 EACH

42 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS 1 EACH

43 REPAIR & MAINTENANCE OF 62.5kVA DG SET 1 EACH

44 REPAIR OF 6.6 kV TRANSFORMER FEEDER 1 EACH

45 REPAIR OF 6.6 kV MOTOR FEEDER 1 EACH

46 REPAIR OF 6.6 kV BUS PT 1 EACH

47 REPAIR OF 6.6 kV INCOMER 1 EACH

48 REPAIR OF 6.6 kV BUS COUPLER 1 EACH

49 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) 1 EACH

50 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS 1 EACH

51 REPAIR AND UPDATETION OF SCADA SOFTWARE 1 EACH

52 REPAIR AND MAINTENANCE OF COMPUTER 1 EACH

53 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS 1 EACH

54 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS 1 EACH

55 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS 1 EACH

56 INTERNET/WIFI FOR SCADA SYSTEM 1 EACH

57 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS 1 EACH

58 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. 1 EACH

59 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS 1 EACH

60 REPAIR OF 250VA CONTROL TRANSFORMER 1 EACH

61 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS 1 EACH

NAME OF WORK : OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS

A. DETAILS OF OPERATION & MAINTENANCE WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 Provision for Technical /Skilled/Helper etc. Man power for General maintenance as well as Repair of Pumps and theirs parts & other incidental works in general Season, as well as in Irrigation Season for Smooth Running & Operation of Pumps as per the direction of E/I.

(I) For First Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 123247.8 1478973.6

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 158499.9 1374194.133

(I) For Second Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 129410.19 1552922.28

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 166424.895 1442903.84

(I) For Third Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 135880.6995 1630568.394

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 174746.13975 1515049.032

(I) For Fourth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 142674.7345 1712096.8137

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 183483.4467 1590801.483

(I) For Fifth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 149808.4712 1797701.654

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 192657.6191 1670341.557

B. DETAILS OF MECHANICAL WORK

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 265000 530000

2 PROVISION FOR REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE-1200 MM NB OF SUCTION SIDE 5 EACH 67000 335000

b SIZE-900 MM NB OF SUCTION SIDE 6 EACH 79625 477750

3 PROVISION FOR REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 20200 40400

4 PROVISION FOR REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 16500 33000

5 PROVISION FOR REPAIR OF METALIC S.S. EXPANSION BELOWS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE -900 MM ( ON PUMP DELIVERY ) 2 EACH 17300 34600

b SIZE-900 MM (ON PIPE LINE ) 2 EACH 16300 32600

6 PROVISION FOR REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 4 EACH 13900 55600

7 PROVISION FOR REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 45850 45850

8 PROVISION FOR GREASE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 225 kG 350 78750

9 PROVISION FOR MOBIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 280 LITER 350 98000

10 PROVISION FOR GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 250 kG 2210 552500

11 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 50 kG 1680 84000

12 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 50 kG 2120 106000

13 PROVISION FOR DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 270 10800

14 PROVISION FOR RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 25 kG 400 10000

15 PROVISION FOR SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 1175 29375

16 PROVISION FOR DISTILLED WATER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 60 LITER 17 1020

17 PROVISION FOR S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 60 kG 555 33300

18 PROVISION FOR RUBBER GASKIT NYLON THREAD FOR N/R VALVE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 30 kG 590 17700

19 PROVISION FOR COTTON WASTE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 115 4600

20 PROVISION FOR GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 20 kG 1170 23400

21 PROVISION FOR MINOR REPAIR OF CHECK VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 19700 39400

22 PROVISION FOR REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 42875 42875

23 PROVISION FOR REPAIRING OF VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 18000 18000

24 PROVISION FOR REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 35500 35500

25 PROVISION FOR REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 155000 465000

26 PROVISION FOR CONSUMPTION OF DIESEL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 350 LITER 92 32200

27 PROVISION FOR REPAIRING OF DEWATERING MOTOR WITH HEATING AND WARNISHING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 16600 16600

28 PROVISION FOR REPAIRING OF DEWATERING PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 12400 12400

29 PROVISION FOR CONSUMPTION OF GEAR OIL FOR EOT CRANE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 LITER 190 4750

30 PROVISION FOR STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 21700 21700

31 PROVISION FOR REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 22370 22370

32 PROVISION FOR LIMIT SWITCH REPAIRING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 11980 23960

33 PROVISION FOR PLASTIC SEAT COVERING OF MOTOR & PANEL ETC COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 3700 92500

34 PROVISION FOR REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 3800 3800

35 PROVISION FOR S.F.F BREAK KIT OF CRANE WITH ACCESSORIES COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 7900 7900

36 PROVISION FOR S.F.F OF SAFETY BELT FOR CRANE WORK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 6550 13100

37 PROVISION FOR REFILLING OF FIRE EXTINGUISHER CYLINDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 4 EACH 10494 41976

38 PROVISION FOR REPAIR OF PRESSURE GAUGE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 4500 9000

TOTAL = 3537276

C. DETAILS OF ELECTRICAL WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR AND CHANGING OF TRANSFORMER OIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a Power Transformer (11KV/6.6KV, 3.0 MVA) 30 KL 83266 2497980

b Auxillary Transformer (6.6KV, 250V KVA) 12.5 KL 83266 1040825

c FILTARATION OF OIL ,IF M/C PROVIDED BY FIRM 42.5 LITER 7 297.5

2 PROVISION FOR REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a 11KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 6 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH 386000 386000

b 6.6KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 9 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH 386000 386000

3 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 2 EACH 78500 157000

4 PROVISION FOR REPAIR & MAINTENANCE OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 85000 255000

5 PROVISION FOR REPAIR & MAINTENANCE OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 6500 6500

6 PROVISION FOR REPAIR & MAINTENANCE OF L.T. PANNEL WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 135600 135600

7 PROVISION FOR REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 218500 1092500

8 PROVISION FOR PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 9252 46260

9 PROVISION FOR REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 5 JOB 205000 1025000

10 PROVISION FOR REPAIR & MAINTENANCE OF 62.5kVA DG SET COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 52500 262500

11 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV TRANSFORMER FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 287875 287875

12 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV MOTOR FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 386000 386000

13 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS PT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 224500 224500

14 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV INCOMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 237000 237000

15 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS COUPLER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 155000 155000

D. DETAILS OF SCADA WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR & MAINTENANCE OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 195900 195900

2 PROVISION FOR REPAIR & MAINTENANCE OF PLC CABLE AS PER SITE SPECIFICATIONS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 2750 2750

3 PROVISION FOR REPAIR & MAINTENANCE AND UPDATETION OF SCADA SOFTWARE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 95700 95700

4 PROVISION FOR REPAIR & MAINTENANCE OF COMPUTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 48500 97000

5 PROVISION FOR REPAIR & MAINTENANCE OF WATER LEVEL SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52200 104400

6 PROVISION FOR REPAIR & MAINTENANCE OF TEMPERATURE SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52500 105000

7 PROVISION FOR REPAIR & MAINTENANCE OF PRESSURE TRANSMITTER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 31700 63400

8 PROVISION FOR INTERNET/WIFI COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 30000 150000

9 PROVISION FOR REPAIR & MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTSCOMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 48400 48400

10 PROVISION FOR REPAIR & MAINTENANCE OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 95000 95000

11 PROVISION FOR REPAIR & MAINTENANCE OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 69000 69000

12 PROVISION FOR REPAIR & MAINTENANCE OF 250VA CONTROL TRANSFORMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 65500 65500

13 PROVISION FOR REPAIR & MAINTENANCE OF MULTIFUNCTION METER WITH ITS SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 13200 13200

TOTAL = 1105250

E. DETAILS OF OTHER IMPORTANT WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 SUPPLYING , INSTALLATION, TESTING AND COMMISSIONING OF ONE PASSENGER LIFT INCLUDING ALL NECESSARY CIVIL AND ELECTRICAL WORK AT CHAUSA PUMP CANAL 1 JOB 2133440 2133440

2 PROVISION FOR PAINTING OF PUMPS, MOTOR,VALVES, BASEPLATES, SLUICE VALVE. AND ALL COMPLETE JOB PIPE LINE AFTER CLEANING, SAND BLASTING AND DE-RUSTING THEM PROPERLY AND DOING TWO COATS OF PAINT OVER ONE COAT OF PRIMER ALL COMPLETE WITH LABOUR AND MATERIALS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 1057000 2114000

TOTAL = 4247440

F. DETAILS OF SPARE PARTS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 COUPLING FOR PUMP 6 EACH 28300 169800

2 COUPLING BOLTS 100 EACH 184 18400

3 ACTUATOR 6 EACH 1041 6246

4 GATE FOR SLUICE VALVE 5 EACH 252000 1260000

5 GASKET 20 EACH 700 14000

6 BEARING 8 EACH 105000 840000

7 BEARING RETAINER 8 EACH 28000 224000

8 BEARING HOUSE 8 EACH 315000 2520000

9 IMPELLER RING 4 EACH 26700 106800

10 IMPELLER KEY 6 EACH 14800 88800

11 CASING RING 4 EACH 115000 460000

12 CASING RING PIN 4 EACH 48200 192800

13 SHAFT EXTENSION KEY 6 EACH 25700 154200

14 SHAFT 4 EACH 248000 992000

15 COUPLING BUSH 6 EACH 48000 288000

16 BATTERY & BATTERY CHARGER 2 EACH 411157 822314

TOTAL = 8157360

TOTAL A+B+C+D+E+F = 41394716.29

TOTAL Rs. = 41808663.45

Contingency @ 0.5 % = 206973.5814

Total Rs. = 49541196.45

Executive Engineer (M), Irrigation Electrical cum Mechanical Division Walmi Patna

J.E (M) A.E. (M)

TECHNICAL CHECKLIST SUBMISSION SHEET (https://eproc2.bihar.gov.in/EPSV2Web/)

Name of Work OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS Cost of Work as per BOQ(Rs in Lakhs) 493.34223 Time of Completion in months 60 Months ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount 49541235 Date of Sanction 09.03.2026 Last Date of Tender 03.04.2026

Sl No. Items Requirement Requirement Cl. No. Name of the contractor

Address of the contractor

1 Registration no. As per IFB & NIT

2 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days ITB 15.1 Bid validity periods In days

3 Bid Security (A) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement. ITB 16.1 Amount To be entered (Rs in Lakhs)

(B) Earnest Money can be paid through Internet Payment Gateway (Credit/Debit Card), Net Banking, NEFT/RTGS in online mode. Amount To be entered (Rs in Lakhs)

Bid Security Amount - (Rs. In Lakhs) Bid Security Amount - (Rs. IN Lakhs)

4 (i) Legal Status of Bidder. ITB 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid ITB 4.2(iv)

5 Total value of Mechanical engineering work performed in last five years. 1. Annual Financial Turn Over usually not less than 50% of the estimated cost of work for which bid has been invited (achieved during any one financial year of last five financial years) (Rs in Lakhs). 4.5(A) (a)

2020 - 2021 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.08

2021 - 2022 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.17

2022 - 2023 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.26

2023- 2024 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.36

2024- 2025 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.47

6 Work Experience of Similar nature Satisfactorily completed atleast one similar work of value not less than 10% of estimated value of contract (Rs in Lakhs) 4.5(A) (b) Amount To be entered (Rs in Lakhs)

7 Eligibility Criteria Bidder must be a Manufacturer / Authorised dealer of Pumps

8 Minimum Quantities of work done as prime / Sub contractor in any one year during last five years. Items Unit Quantity ITB 4.5(A)(c)

OPERATION/MAINTENANCE/FABRICATION / ERECTION WORK OF CENTRIFUGAL PUMP SETS AND INDUCTION MOTORS INSTALLED IN THE PUMP HOUSE FOR PUMPING SCHEME & ITS ALL OTHER ALLIED COMPONENTS. (QUANTITY IS IN NOS.) Nos 2 Value to be entered in same unit

MAINTENANCE, OPERATION, ROUTINE INSPECTION, REPAIR AND SERVICING OF ALLIED ELECTRO-MECHANICAL COMPONENTS INCLUDING CONTROL PANELS, VALVES, PIPELINES AND ELECTRICAL SYSTEMS TO ENSURE SMOOTH FUNCTIONING OF THE PUMPING STATION (QUANTITY IS IN NOS. ) Nos 2

OPERATION AND MAINTENANCE OF SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION) SYSTEM FOR MONITORING AND CONTROL OF PUMP OPERATION AND RELATED ELECTRICAL/MECHANICAL PARAMETERS. (QUANTITY IS IN NOS.) Nos 2

9 Bidding Capacity: More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period ITB 4.7

(a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

10 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required Max. Age in years Nos. Required ITB 4.5(B) (a) Nos./ Max. Age

EOT / Chain Pulley Block (for lifting pump and motor during maintenance) 5

Electrical Testing Kit (Multimeter, Megger, Clamp Meter) 5

Bearing Puller and Mechanical Maintenance Tool Kit. 5

Insulation Resistance Tester / Motor Testing Equipment 5

Welding machine with gas cutting set for mechanical repair work 5

SCADA Interface Device for Monitoring and Diagnostics 5

Power Tool Kit (Drill Machine, Grinder, Cutting Tools) 5

11 Key Personnel Personnel/Qualification/Contract Package Size ITB 4.5(B) (b) Name of the Personnel and Experince in years

Site Engineer-B.E.Mechanical/Electrical+ 07 years exp.or retired A.E(Mech.) 1

Site Supervisor - Fresh Graduate in Mechanical-01 nos or Diploma Mechanical -01 nos + 03 years Exp. Or retired ITI Holder OR Fresh Graduate in Electrical-01 nos or Diploma Electrical-01 nos + 03 years Exp. Or retired ITI Holder 1

12 Evidence of accesses to Financial Resources Evidence of access to or availability of credit facilities (minimum 10% of estimated cost), certified by bankers. (Rs in Lakhs). ITB 4.2(i) Amount To be entered (Rs in Lakhs)

13 Proposed methodology and programme of work Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. ITB 4.3(l)

14 Litigation History Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. ITB 4.3(j)

15 Affidavit Affidavit should be submitted in the format as per the Annexure-3 of the Water Resources Department letter no. 536 dated 13.06.2013 . As per SBD Format

16 Undertaking Able to invest a minimum of cost upto 25% of contract value of work, during implementation of contract. ITB 4.2(ii)

17 Time of Completion 60 Months To be entered in months

18 Factory License no. & UDYAM AADHAR No.

18 Character Chertificate (As per letter no. 124 dated 04.02.2021 of WRD.)

19 I.T. & GST Registration Certificate.

20 Non Association With Departmental Officials.

21 NOC for Debar (If required)

QUALIFICATION INFORMATION

The information to be filled in by the Bidder in the following pages will be used for purposes of post qualification as provided for in Clause 4 of the Instructions to Bidders. This information will not be incorporated in the Contract.

NAME OF THE CONTRACTOR

1 For Individual Bidders

1.1 Constitution or legal status of Bidder (Attach copy)

Place of registration :

Principal place of business :

Power of attorney of signatory of Bid (Attach)

1.2 Total value of Mechanical Engineering work performed in the last five years** (in Rs. Million)

1.3.1 Work performed as prime contractor, work performed in the past as a nominated sub- contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document.

NAME OF THE CONTRACTOR

Project Name Name of the Employer* Description of work Contract No. Value of Contract (Rs. In Crore) Date of issue of work order Stipulated period of completion Actual date of completion* Remarks explaining reasons for delay & work completed)

* Attach certificate(s) from the Engineer(s)-in-Charge

** Upto last day of the month Immediately preceding the last date of bids received. (PWD letter no. 2863(E) dt. 7.6.2017

 Attach certificate from Chartered Accountant.

1.3.2 Quantities of work executed as prime contractor, work performed in the past as a nominated sub-contractor will also be considered provided the sub-contract involved execution of all main items of work described in the bid document, provided further

NAME OF THE CONTRACTOR

Year Name of the work Name of the Employer* Quantity of work performed

OPERATION/MAINTENANCE/REPAIR/FABRICATION / ERECTION WORK OF CENTRIFUGAL PUMP SETS AND INDUCTION MOTORS INSTALLED IN THE PUMP HOUSE FOR IRRIGATION PUMPING SCHEME & ITS ALL OTHER ALLIED COMPONENTS. MAINTENANCE, OPERATION, ROUTINE INSPECTION, REPAIR AND SERVICING OF ALLIED ELECTRO-MECHANICAL COMPONENTS INCLUDING CONTROL PANELS, VALVES, PIPELINES AND ELECTRICAL SYSTEMS TO ENSURE SMOOTH FUNCTIONING OF THE PUMPING STATION OPERATION AND MAINTENANCE OF SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION) SYSTEM FOR MONITORING AND CONTROL OF PUMP OPERATION AND RELATED ELECTRICAL/MECHANICAL PARAMETERS. Remarks* (indicate contract Ref)

1.4 Information on Bid Capacity (works for which bids have been submitted and works which are yet to be completed) as on the date of this bid.

(A) Existing commitments and on-going works:

NAME OF THE CONTRACTOR

Description of works Place & State Contract No. Name & Address of Employer Value of Contract (Rs Cr) Stipulated Period of Completion Value of works* remaining to be completed (Rs Cr) Anticipated date of completion

* Attach certificate(s) from the Engineer(s)-in-Charge

The item of work for which data is requested should tally with that specified in ITB clause.

** Immediately preceding the financial year in which bids are received.

# Delete, if prequalification has been carried out.

(B) Works for which bids already submitted :

Description of works Place & State Name & Address of Employer Estimated value of works (Rs Cr) Stipulated period of completion Date when decision is expected Remarks, if any

1.5 Availability of key items of Contractor’s Equipment essential for carrying out the Works [Ref. Clause 4.5(B)(a)]. The Bidder should list all the information requested below. Refer also to Sub Clause 4.3 (d) of the Instruction to Bidders.

NAME OF THE CONTRACTOR

Description of works Requirement Availability proposals Remarks (from whom to be purchased)

No. Capacity Owned/Leased to be procured Nos./Capacity Age/ Condition

1.6 Qualifications and experience of key personnel required for administration and execution of the Contract [Ref. Clause 4.5(B)(b)]. Attach biographical data. Refer also to Sub Clause 4.3 (e) of instructions to Bidders and Sub Clause 9.1 of the Condition

NAME OF THE CONTRACTOR

Position Name Qualification Year of Experience (General) Years of experience in the proposed position

1.7 Proposed sub-contracts and firms involved. [Refer ITB Clause 4.3(k)]

NAME OF THE CONTRACTOR

Sanction of the works Value of Sub-contract Sub-contractor (Name & Address) Experience in similar work

Attach copies of certificates on possession of valid license for executing water supply/ sanitary work/ building electrification works [Reference Clause 4.5(d) & Clause 4.5(e)]

*1.8 Financial reports for the last five years: balance sheets, profit and loss statements, auditors' reports (in case of companies/corporation), etc. List them below and attach copies.

1.9 Evidence of access to financial resources to meet the qualification requirements: cash in hand, lines of credit, etc. List them below and attach copies of support documents.

1.10 Name, address and telephone, telex and fax numbers of the Bidders' bankers who may provide references if contacted by the Employer.

1.11Information on litigation history in which the Bidder is involved.

NAME OF THE CONTRACTOR

Other Party(ies) Employer Cause of Dispute Amount involved Remarks showing Present Status

1.12 Statement of compliance under the requirements of Sub Clause 3.2 of the instructions to Bidders. (Name of Consultant engaged for project preparation is ** ........................ …………….............................)

Proposed work method and schedule. The Bidder should attach descriptions, drawings and charts as necessary to comply with the requirements of the Bidding documents. [Refer ITB Clause 4.1 & 4.3(1)]

1.15 Quality Assurance Programme

2 Additional Requirements

2.1 Bidders should provide any additional information required to fulfill the requirements of Clause 4 of the Instructions to the Bidders, if applicable.

(ii) Undertaking

*** (iii) Update of original prequalification application

*** (iv) Copy of original prequalification application

*** (v) Copy of prequalification letter

* Delete, if prequalification has been carried out.

** Fill the Name of Consultant.

*** Delete, if prequalification has not been carried out.

Check List for Submission Of Tender

Evaluation will be done as per the information provided in the document attached with tender. Bidder may disqualified, if documents are not attached properly.

Name of the Bidder

Sl. No. Checklist Items (Attach Documents in Link Name As Given in Adjacent coloumn in Edit Attachment Folder) Link Name in Edit Attachment Document attached

1 BID SECURITY PHOTO COPY BID SECURITY PC

2 LAST 5 YEARS ANNUAL TURN OVER ANNUAL TURN OVER

3 EXPERIENCE Of SIMILAR NATURE Of W0RKS EXP SIM NAT

4 QUANTITY OF WORK EXECUTED DURING LAST 5 YEARS WORK EXE QTY

5 MANUFACTURER/ AUTHORISED DEALER CERTIFICATE/DOCUMENT RELATED CERTIFICATE/DOCUMENT

6 BALANCE VALUE OF ON GOING WORKS BAL VAL WORKS

7 EXISTING COMMITMENTS EXIST COMT

8 BANKER'S CERTIFICATE FOR ACCESS OF FINACIAL RESOURCES BANK CER

9 AFFIDAVIT AFFIDAVIT

10 UNDERTAKING FOR BID VALIDITY, INVESTMENT ABILITY, NON ASSOCIATION WITH OFFICIALS. UNDERTAKING

11 LITIGATION HISTORY LIT HIS

12 PLANT and MACHINARIES PT & MAC

13 KEY PERSONNEL KEY PER

14 Registration REGISTRATION

15 Power of Attoney POW AT

16 Legal Status Of Bidder LEGAL

17 PROGRAMME Of WORKS PROG WORK

18 IT & ST REGISTRATION and CLEARANCE CERTIFICATE IT GST CLEARANCE

19 NOC FOR DEBAR DEBAR

20 Proposal of sub-Contract SUB-CONTRACT

21 Joint Venture JV

22 Factory License no. & UDYAM AADHAR NO. FL & UA

23 NON ASSCIATION WITH DEPARMENTAL OFFICIALS NADO

24 PAN & GST REGISTRATION P&GST

25 Character Chertificate CC

IF YOU HAVE NOT BEEN DEBARED WRITE "NOT APPLICABLE" IN YOUR LETTER HEAD SCAN AND UPLOAD IN THE IN NOC FOR DEBAR LINK

Note:-Attachment should be self attested and should be attached as per above instruction, otherwise it may be rejected.

I, the undersigned, do hereby certify that all the statements made in the required attachments are true and correct.

Signature & Seal of the Bidder

Sl. Description Qty. Unit Rate Amount

Repair of horizontal split casing centrifugal pump (capacity 60 cusec ,Head 29 M) 1

1 Centrifugal Pump with Motor:- Supplyof Horizontal Split casing Centrigual pump set with 2 % NICI Casing, SSCF8M impeller and driven for 3 phase 6.6 KV , 750 RPM , 50 HZ AC Flange mounted spirrel cage induction motor having TEFC enclousre as per specification . The scope also include all required accessories Bell mouth, foundation bolt base plate , coupling & coupling guard and companion flange (capacity 60 cusec ,head,29 M, 6.6 KV 900 HP /750 RPM Electric Motor. 4 Each

Repair of double flanged electrically operated C.I. Sluice valve

Size-1200 mm NB of suction side. 1

Size 900 mm NB on deliver side. 1

2 Sluice Valve:-Supplying of double flanged electrically operated C.I. Sluice valve conforming to relevant latest IS of P.N. 1.0 rating . Per Cft.

(ii) Size-1200 mm NB of suction side. 4 Each

(iii) Size 900 mm NB on deliver side. 4 Each

Repair of multi door flanged non return valve conforming to relevant/latest IS 900 mm 1

3 Non Return Valve:- Supply of multi door flanged non return valve conforming to relevant/latest IS 900 mm 4 Each

Repair of double active Kinetic Air release Valve size -200 mm 1

4 Air Valve :- Supply of double active Kinetic Air release Valve size -200 mm . 4 Each

5 MS PIPE:-Manufacturing , Faluation , suplyin laying with welded joints, leading , Painting and horing & Commissioning of MS Pipe conforming to I 12393589 fabricated from M.S. Plate of Sail, JiNDAL, conforming to IS 2062 . Necessary civil suppor and anchoring shall also be included in the scope of bidder including the cost of dismentalling of existing old delivery pipe & road crossing work for laying new pipe line in delivery side.

(i) Size 1200 mm -10 mm thick ( suction side ) 40 meter

(ii) Size 900 mm NB-8 mm thick ( Delivery side ) 800 meter

6 Manufacturing , Fabrication , suply, penting , Installation , Testing , painting & commissioning of MS specials like reducers enlarge , load etc of required size; 1 lot

7 Manufacturing , Fabrication , suply, painting , Installation , Testing , pedning & commissioning of MS Flange conforming to IS 1538 Lable Va & VI with flat face, off centre bolt holes & as per site requirement.

(i) Size 1200 mm ( (Suction siide) 20 Each

(ii) Size -900 mm ( Delivery Side) 60 Each

Repair of Metalic S.S. Expansion belows

Size -900 mm ( on Pump Delivery ) 1

Size-900 mm (On Pipe line ) 1

8 Supply of Metalic S.S. Expansion belows confirming to Relevant standered with PN 1.0 rating withall necessary hardwares.

(i) Size -900 mm ( on Pump Delivery ) 4

(ii) Size-900 mm (On Pipe line ) 4

Repair of electromagnetic type Flowmeter with its accessories 1

9 Flowmeter:-Supply of full bore electromagnetic type Flowmeter with indicator , transmitter , totalise and signed cable and necessary harwares etc. 4

Repair of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder 1

10 EOT Crane :-Supply of Double Girder EOT crane of capacity of 12.50 Ton ( Upper & Lower crane ) with Girder and all necessary accessories. 2

11 Supply of 33 KV M.S. two pole structure with all accessories including Poles etc. fencing and CI PI units as per BST B requirement with all accessories as per E.I.

12 TRANSFORMER:-(I)Supply of power Transformer of 33 KV 6.6 KV, 3.0 MVA, DYN -H ONAN with off load tap changer.

(ii) Supply of Auxillaary Tranformer of 6.6 KV 440V, 250 KVA , DyN -11 ONAN with off load tap changer.

13 H.T. PANNEL:-Supply of 33 KVA of required MVA and required current rating VCB HT Pannel set comprising of 5 Nos. pannel board 02 No incomming -2 Nos. outgong Bus coupler.

(ii) Supply of 6.6 KVA of required MV A and required current ratign VCB H T Pannel set comprising of 10Nos. Panlel 12 Nos. incoming , 5 nos. outgoning ( 4 nos. for motors and 1 No for auxillary transformer ) + 1 No Bus coupler + 2 nos. Bus PI feder. )

14 CAPACITOR BANK -Supply of 6.6 KV HT. suitable capacitor bank pannel with on load brek switch for above .

15 FCMA TYPE REACTOR type soft starter.

(i) Supply of 33 KV , 3C-400 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(ii) Supply of 6.6 KV , 3C-300 Sq. mm XI PI ( 1) AI cable as per direction of E/I.

(iii) Supply of 1.1 KV suitable size AYFY YWY able of suitable size where ever applicable.

(iv) Supply of control cable for Flowmeter and auxillary eqipment.

(v) Cable try III & IT cable as per site requirement .

17 Cable Termination:-

(i) Supply of 33 KV Termination

(ii) Supply of 6.6 KV Termination

(iii) Supply of 1.1 KV Termination

18 BATTERY AND BATTERY CHARGER PANEL

Supply of 110 V 200 All Battery with Float Cum Boost charger with DC DB for suitable operation.

19 EF MCC Pannel

Supply of LT Mec Panel of suitable rating and capacity for Auxillary powr supply.

20 ISH RNAI LIGHTING & Internal lighting.

Suply of suitable general lighting arrangement inside & our side the pump house and floir four pole structure.

Supply of G.I. Plate type earthing with necessary G.I. Strips as per Flowmeter.

22 PRESSURE GUAGE

Supply , Installation , Testing and commissioning of 150 mm nDial foundation type pressure guage with isolation valve & SS Tabling with all accessories and hardwares.

23 Dewatering PUMP:- Supply of non summerible type dewatering pump with starter pannel delivery pipe and cable up to sharter pannel with all acceesories.

Capicity 50 M P/Hour.

Supply of vaccum pump of 15 HP Capacity with starter , Cable Pipe etc. all accessories.

25 Safety accessories as per E.I. requirement like rubber mat, and First Aid Box . Shock treatment chart.

26 ERECTION AND COMMISSIONING

(i) Pump & Motor.

(ii) 1200 mm Sluice Valve

(iii) 900 mm Sluice Valve

(iv) 900 mm NRV

(v) 900 mm Air Release Valve.

(vi) 900 mm Expansion Bewllows && MS specials.

(vii) Flowmeter

(viii) NH Crane

(ix) KV Low pole structure.

(x) MVA Power Transformer with foundation .

(xi) 900 KVA Power Transformer with foundation .

(xii) KV HT Pannel

(xiii) KV HT Pannel

(xv) 900 HP MA Soft starter.

( xvi) Control Cable

(xvii) KV HT Cable.

(xviii) KV HT Cable with tray.

(xix) KV HT Cable with tray.

(xx) 33 KV Temination.

(xxi) 6.6 KV Termination.

(xxii) 1.1 KV Termination.

(xxiii) Battery and Battery Charger.

(xxiv) HT Panel

(xxv) Internal and External lighting

(xxvi) Earthing

(xxvii) Pressure Guage

(xxviii) Dewatering Pump

(xxix) Vaccum Pump

(xxx) Safty accessories.

(xxxi) Operation maintenance.

ESTIMATE FOR OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT FOR FIVE YEARS

DETAILS OF OPERATION & MAINTENACE FOR SUPPLY FITTING & FIXING OF CONSUMABLE MATERIALS & MINOR REPAIR OF CHAUSA PUMP HOUSE

A. MECHANICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVERY SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS EACH

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GREASE 214 PER KG

9 MOBIL (7 LITER X 8 MONTH) 56 PER LITER

10 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 240 PER KG

11 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 50 PER KG

12 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 50 PER KG

13 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 40 PER KG

14 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 27 PER KG

15 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 16 EACH

16 DISTILLED WATER 60 PER LITER

17 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 60 PER KG

18 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 27 PER KG

19 COTTON WASTE 5KG PER MONTH FOR 8 MONTHS 40 PER KG

20 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 14 PER KG

21 MINOR REPAIR OF REFLUX VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT 2 EACH

22 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

23 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 2 EACH

24 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 4 EACH

25 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS

26 CONSUMPTION OF DIESEL 347 PER LITER

27 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 2 EACH

28 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 2 EACH

29 GEAR OIL FOR EOT CRANE 20 PER LITER

30 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 2 EACH

31 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS

32 LIMIT SWITCH REPAIRING 2 EACH

33 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 2 PER JOB

34 CHECK VALVE 1 EACH

35 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 20 PER METER

36 BATTERY CHARGER REPAIRING WITH ALL LABOUR & MATERIALS 1 EACH

37 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 2 EACH

38 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

39 S.F.F OF SAFETY BELT FOR CRANE WORK 2 EACH

40 REFILLING OF FIRE EXTINGUISHER CYLINDER 4 EACH

41 REPAIR OF PRESSURE GAUGE WITH SPARE PARTS

B. ELECTRICAL ITEMS

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR AND CHANGING OF TRANSFORMER OIL

I FOR POWER TRANSFORMER (11KV/6.6KV, 3.0 MVA) 2

II FOR TRANSFPRMER OIL OF AUXILLARY TRANSFORMER (250KVA) 1

2 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS

I FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1

II FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1

3 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1

4 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER 1

5 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS

6 REPAIR OF L.T. PANNEL WITH SPARE PARTS

7 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE

8 PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC.

9 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS

10 REPAIR & MAINTENANCE OF 62.5kVA DG SET

11 REPAIR OF 6.6 kV TRANSFORMER FEEDER

12 REPAIR OF 6.6 kV MOTOR FEEDER

13 REPAIR OF 6.6 kV BUS PT

14 REPAIR OF 6.6 kV INCOMER

15 REPAIR OF 6.6 kV BUS COUPLER

C. SCADA SYSTEM

S.N. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE)

2 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS

3 REPAIR AND UPDATETION OF SCADA SOFTWARE

4 REPAIR AND MAINTENANCE OF COMPUTER

5 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS

6 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS

7 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS

8 INTERNET/WIFI FOR SCADA SYSTEM

9 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS

10 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd.

11 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS

12 REPAIR OF 250VA CONTROL TRANSFORMER

13 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS

D. TECHNICAL / NON- TECHNICAL LABOUR

S.N. TYPE OF STAFF NO. PER SHIFT NO. OF SHIFT TOTAL AVAILABLE PERIOD RATE

1 PUMP OPERATOR Gr.-1 1 3 3 250

2 SCADA OPERATOR 2 3 6 250

3 HELPER 2 3 6 250

4 ORDINARY LABOUR 1 3 3 250

5 ELECTRICIAN 1 - 1 365

6 MECHANIC 1 - 1 250

7 SWEEPER 1 - 1 365

8 WATCHMAN 1 3 3 365

IN GENERAL SEASON

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 1 1 637 16562

2 Data Entry Operator 1 1 1 536 13936

3 Supervisor (Diploma in Engineering) 1 1 1 660 17160

4 Pump Operator Grade - I 1 1 1 541 14066

5 Mechanic Grade - I 1 1 1 660 17160

6 Electrician Grade - I 1 1 1 660 17160

TOTAL AMOUNT PER MONTH = 107172

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 123247.8

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 129410.19

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 135880.6995

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 142674.7345

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 149808.4712

DURING IRRIGATION PERIOD

S.N. PARTICULARS QTY. NO. OF SHIFT TOTAL NOS. RATE PER DAY Amount (Per Month for 26 days)

1 SCADA Operator 1 2 2 637 33124

2 Data Entry Operator 1 2 2 536 27872

3 Pump Operator Grade - I 1 2 2 541 28132

4 Crane Operator Grade - II 1 1 1 541 14066

TOTAL AMOUNT PER MONTH = 137826

TOTAL AMOUNT PER MONTH FOR 1ST YEAR TOTAL = 158499.9

TOTAL AMOUNT PER MONTH FOR 2ND YEAR TOTAL = 166424.895

TOTAL AMOUNT PER MONTH FOR 3RD YEAR TOTAL = 174746.13975

TOTAL AMOUNT PER MONTH FOR 4TH YEAR TOTAL = 183483.4467

TOTAL AMOUNT PER MONTH FOR 5TH YEAR TOTAL = 192657.6191

S.N. DESCRIPTION QUANTITY UNIT

1 REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) WITH SPARE PARTS 1 EACH

2 REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH SPARE PARTS

I SIZE-1200 MM NB OF SUCTION SIDE. 1 EACH

II SIZE 900 MM NB ON DELIVER SIDE. 1 EACH

3 REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH SPARE PARTS 1 EACH

4 REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH SPARE PARTS 1 EACH

5 REPAIR OF METALIC S.S. EXPANSION BELOWS WITH SPARE PARTS

I SIZE -900 MM ( ON PUMP DELIVERY ) 1 EACH

II SIZE-900 MM (ON PIPE LINE ) 1 EACH

6 REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) WITH ITS ACCESSORIES 1 EACH

7 REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER WITH SPARE PARTS 1 EACH

8 GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP 1 PER KG

9 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM 1 PER KG

10 GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM 1 PER KG

11 DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT 1 PER KG

12 RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP 1 PER KG

13 SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP 1 EACH

14 S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. 1 PER KG

15 RUBBER GASKIT NYLON THREAD FOR N/R VALVE 1 PER KG

16 GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP 1 PER KG

17 REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

18 REPAIRING OF VACCUM PUMP WITH COST OF LABOUR & MATERIAL 1 EACH

19 REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

20 REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

21 REPAIRING OF DEWATERING MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS 1 EACH

22 REPAIRING OF DEWATERING PUMP WITH SPARE PARTS 1 EACH

23 GEAR OIL FOR EOT CRANE 1 PER LITER

24 STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS 1 EACH

25 REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS 1 EACH

26 LIMIT SWITCH REPAIRING 1 EACH

27 JET PUMP OVER HOULING WITH HEATING & WARNISHING WITH ARMATURE WINDING WITH SPARE PARTS 1 PER JOB

28 REPAIR OF CHECK VALVE 1 EACH

29 PLASTIC SEAT COVERING OF MOTOR & PANEL ETC 1 PER METER

30 BATTERY CHARGER REPAIRING WITH SPARE PARTS 1 EACH

31 REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS 1 EACH

32 S.F.F BREAK KIT OF CRANE WITH ACCESSORIES 1 EACH

33 S.F.F OF SAFETY BELT FOR CRANE WORK 1 EACH

34 REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS 1 EACH

35 FOR SUPPLY OF 11KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 5 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH

36 FOR SUPPLY OF 6.6KV OF REQUIRED MVA & REQUIRED CURRENT RATING VCB H.T. PANNEL SET COMPRISING OF 9 NOS OF PANNEL BOARDS ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH

37 REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK 1 EACH

38 REPAIR OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER WITH SPARE PARTS 1 EACH

39 REPAIR OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS 1 EACH

40 REPAIR OF L.T. PANNEL WITH SPARE PARTS 1 EACH

41 REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE 1 EACH

42 REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS 1 EACH

43 REPAIR & MAINTENANCE OF 62.5kVA DG SET 1 EACH

44 REPAIR OF 6.6 kV TRANSFORMER FEEDER 1 EACH

45 REPAIR OF 6.6 kV MOTOR FEEDER 1 EACH

46 REPAIR OF 6.6 kV BUS PT 1 EACH

47 REPAIR OF 6.6 kV INCOMER 1 EACH

48 REPAIR OF 6.6 kV BUS COUPLER 1 EACH

49 REPAIR OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) 1 EACH

50 REPAIR OF PLC CABLE AS PER SITE SPECIFICATIONS 1 EACH

51 REPAIR AND UPDATETION OF SCADA SOFTWARE 1 EACH

52 REPAIR AND MAINTENANCE OF COMPUTER 1 EACH

53 REPAIR OF WATER LEVEL SENSOR WITH SPARE PARTS 1 EACH

54 REPAIR OF TEMPERATURE SENSOR WITH SPARE PARTS 1 EACH

55 REPAIR OF PRESSURE TRANSMITTER WITH SPARE PARTS 1 EACH

56 INTERNET/WIFI FOR SCADA SYSTEM 1 EACH

57 MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTS 1 EACH

58 REPAIR OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. 1 EACH

59 REPAIR OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS 1 EACH

60 REPAIR OF 250VA CONTROL TRANSFORMER 1 EACH

61 REPAIR OF MULTIFUNCTION METER WITH ITS SPARE PARTS 1 EACH

BILL OF QUANTITY

NAME OF WORK : OPERATION AND MAINTENANCE OF 04 NOS OF CENTRIFUGAL PUMP SET OF 60 CUSEC CAPACITY AND 29M HEAD, INDUCTION MOTOR EACH IN PUMP HOUSE INCLUIDING OTHER ALLIED MECHANICAL AND ELECTRICAL COMPONENTS FOR CHAUSA PUMP CANAL SCHEME IN CHAUSA BLOCK OF BUXAR DISTRICT UNDER IRRIGATION ELCETRICAL CUM MECHANICAL DIVISION, WALMI PATNA FOR PERIOD OF FIVE YEARS

A. DETAILS OF OPERATION & MAINTENANCE WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 Provision for Technical /Skilled/Helper etc. Man power for General maintenance as well as Repair of Pumps and theirs parts & other incidental works in general Season, as well as in Irrigation Season for Smooth Running & Operation of Pumps as per the direction of E/I.

(I) For First Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 123247.8 1478973.6

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 158499.9 1374194.133

(I) For Second Year (12 Months)

a In General Season (General shift) (12 Months) 12 Months 129410.19 1552922.28

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 166424.895 1442903.84

(I) For Third Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 135880.6995 1630568.394

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 174746.13975 1515049.032

(I) For Fourth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 142674.7345 1712096.8137

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 183483.4467 1590801.483

(I) For Fifth Year (12 Months)

a In General Season (In three shift + General shift) (12 Months) 12 Months 149808.4712 1797701.654

b During Irrigation Period (01 June to 31st Oct. i.e. 5 months & 20th Dec. to 31st March i.e. 3.67 months) 8.67 Months 192657.6191 1670341.557

B. DETAILS OF MECHANICAL WORK

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR OF HORIZONTAL SPLIT CASING CENTRIFUGAL PUMP (CAPACITY 60 CUSEC ,HEAD 29 M) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 265000 530000

2 PROVISION FOR REPAIR OF DOUBLE FLANGED ELECTRICALLY OPERATED C.I. SLUICE VALVE WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE-1200 MM NB OF SUCTION SIDE 5 EACH 67000 335000

b SIZE-900 MM NB OF SUCTION SIDE 6 EACH 79625 477750

3 PROVISION FOR REPAIR OF MULTI DOOR FLANGED NON RETURN VALVE CONFORMING TO RELEVANT/LATEST IS 900 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 20200 40400

4 PROVISION FOR REPAIR OF DOUBLE ACTIVE KINETIC AIR RELEASE VALVE SIZE -200 MM WITH COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 16500 33000

5 PROVISION FOR REPAIR OF METALIC S.S. EXPANSION BELOWS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a SIZE -900 MM ( ON PUMP DELIVERY ) 2 EACH 17300 34600

b SIZE-900 MM (ON PIPE LINE ) 2 EACH 16300 32600

6 PROVISION FOR REPAIR OF ELECTROMAGNETIC TYPE FLOWMETER (SITRANS F M MAG 6000 OF SIMENS MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 4 EACH 13900 55600

7 PROVISION FOR REPAIR OF DOUBLE GIRDER EOT CRANE OF CAPACITY OF 12.50 TON ( UPPER & LOWER CRANE ) WITH GIRDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 45850 45850

8 PROVISION FOR GREASE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 225 kG 350 78750

9 PROVISION FOR MOBIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 280 LITER 350 98000

10 PROVISION FOR GLAND PACKING FOR 4 NOS. 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 250 kG 2210 552500

11 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 900 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 50 kG 1680 84000

12 PROVISION FOR GLAND PACKING FOR 4 NOS.SLUICE VALVE OF SIZE 1200 MM COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 50 kG 2120 106000

13 PROVISION FOR DIFFERENT TYPE OF NUT BOLT WITH CUT WASHER INCLUIDING FOUNDATION BOLT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 270 10800

14 PROVISION FOR RUBBER PACKING OF DIFFERENT SIZE WITH FITTING CHARGE FOR 4 NOS OF 60 CUSEC PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 25 kG 400 10000

15 PROVISION FOR SUPPLY & FITTING WITH RUBBER COVER COMPLETE NUT BOLT FOR COUPLING OF MOTOR & PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 1175 29375

16 PROVISION FOR DISTILLED WATER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 60 LITER 17 1020

17 PROVISION FOR S.F.F. HIGH CARBON NUT BOLT FOR 60 CUSEC PIPE LINE , N/R VALVE, SLUICE VALVE ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 60 kG 555 33300

18 PROVISION FOR RUBBER GASKIT NYLON THREAD FOR N/R VALVE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 30 kG 590 17700

19 PROVISION FOR COTTON WASTE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 40 kG 115 4600

20 PROVISION FOR GLAND PACKING FOR DEWATERING PUMP & VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 20 kG 1170 23400

21 PROVISION FOR MINOR REPAIR OF CHECK VALVE & SETTING WITH NEW GASKIT & CHANGING OF NUT BOLT AS PER SITE REQUIREMENT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 19700 39400

22 PROVISION FOR REPAIRING OF VACCUM MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 42875 42875

23 PROVISION FOR REPAIRING OF VACCUM PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 18000 18000

24 PROVISION FOR REPAIRING OF CRANE MOTOR WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 35500 35500

25 PROVISION FOR REPAIRING OF MOTOR OF 900 HP WITH HEATING & WARNISHING WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 155000 465000

26 PROVISION FOR CONSUMPTION OF DIESEL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 350 LITER 92 32200

27 PROVISION FOR REPAIRING OF DEWATERING MOTOR WITH HEATING AND WARNISHING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 16600 16600

28 PROVISION FOR REPAIRING OF DEWATERING PUMP COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 12400 12400

29 PROVISION FOR CONSUMPTION OF GEAR OIL FOR EOT CRANE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 LITER 190 4750

30 PROVISION FOR STARTER REPAIRING OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 21700 21700

31 PROVISION FOR REPAIRING OF BUSBAR OF EOT CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 22370 22370

32 PROVISION FOR LIMIT SWITCH REPAIRING COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 11980 23960

33 PROVISION FOR PLASTIC SEAT COVERING OF MOTOR & PANEL ETC COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 25 METER 3700 92500

34 PROVISION FOR REPAIRING OF BRAKE OF CRANE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 3800 3800

35 PROVISION FOR S.F.F BREAK KIT OF CRANE WITH ACCESSORIES COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 7900 7900

36 PROVISION FOR S.F.F OF SAFETY BELT FOR CRANE WORK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 6550 13100

37 PROVISION FOR REFILLING OF FIRE EXTINGUISHER CYLINDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 4 EACH 10494 41976

38 PROVISION FOR REPAIR OF PRESSURE GAUGE WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 4500 9000

TOTAL = 3537276

C. DETAILS OF ELECTRICAL WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR AND CHANGING OF TRANSFORMER OIL COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a Power Transformer (11KV/6.6KV, 3.0 MVA) 30 KL 83266 2497980

b Auxillary Transformer (6.6KV, 250V KVA) 12.5 KL 83266 1040825

c FILTARATION OF OIL ,IF M/C PROVIDED BY FIRM 42.5 LITER 7 297.5

2 PROVISION FOR REPAIR OF H.T. PANNEL SET RATED AT 500 KVAR, 6.6V, 3PH, 50 Hz WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I.

a 11KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 6 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING) 1 EACH 386000 386000

b 6.6KV of Required MVA & Required Current Rating VCB H.T. Pannel set comprising of 9 NOS of Pannel Boards ( 2NO. INCOMING + 4NO. OUTGOING + 1NO. BUD COUPLER + 2 NO. BUS PT FEEDER)) 1 EACH 386000 386000

3 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 KV CAPACITOR BANK COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 2 EACH 78500 157000

4 PROVISION FOR REPAIR & MAINTENANCE OF 670kW, 3Ph, 6600V, 50Hz FCMA SOFT STARTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 3 EACH 85000 255000

5 PROVISION FOR REPAIR & MAINTENANCE OF BATTERY AND BATTERY CHARGER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 6500 6500

6 PROVISION FOR REPAIR & MAINTENANCE OF L.T. PANNEL WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 135600 135600

7 PROVISION FOR REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL LIGHTING SYSTEM OF PUMP HOUSE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 218500 1092500

8 PROVISION FOR PROVIDING THE REQUIRED SAFETY ACCESSORIES SUCH AS FIRST AID BOX, SAND BUCKET, GUM BOOT, HAND GLOVES ETC. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 9252 46260

9 PROVISION FOR REPAIR OF 16M HIGH MAST WITH 12 LED LIGHT WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 5 JOB 205000 1025000

10 PROVISION FOR REPAIR & MAINTENANCE OF 62.5kVA DG SET COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 52500 262500

11 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV TRANSFORMER FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 287875 287875

12 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV MOTOR FEEDER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 386000 386000

13 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS PT COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 224500 224500

14 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV INCOMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 237000 237000

15 PROVISION FOR REPAIR & MAINTENANCE OF 6.6 kV BUS COUPLER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 155000 155000

D. DETAILS OF SCADA WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 PROVISION FOR REPAIR & MAINTENANCE OF PLC PANNEL AS PER SITE SPECIFICATIONS (SCHNEIDER MAKE) COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 195900 195900

2 PROVISION FOR REPAIR & MAINTENANCE OF PLC CABLE AS PER SITE SPECIFICATIONS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 2750 2750

3 PROVISION FOR REPAIR & MAINTENANCE AND UPDATETION OF SCADA SOFTWARE COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 JOB 95700 95700

4 PROVISION FOR REPAIR & MAINTENANCE OF COMPUTER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 48500 97000

5 PROVISION FOR REPAIR & MAINTENANCE OF WATER LEVEL SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52200 104400

6 PROVISION FOR REPAIR & MAINTENANCE OF TEMPERATURE SENSOR WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 52500 105000

7 PROVISION FOR REPAIR & MAINTENANCE OF PRESSURE TRANSMITTER WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 31700 63400

8 PROVISION FOR INTERNET/WIFI COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 5 JOB 30000 150000

9 PROVISION FOR REPAIR & MAINTENANCE OF HMI (HMIGXU3512) INTERFACE SYSTEM WITH SPARE PARTSCOMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 48400 48400

10 PROVISION FOR REPAIR & MAINTENANCE OF CONTROL PANEL 230V AC BY PROTON POWER CONTROL Pvt. Ltd. COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I 1 EACH 95000 95000

11 PROVISION FOR REPAIR & MAINTENANCE OF ALARM ANNUNCIATOR WITH ITS ACCESSORIES ALONG WITH SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 69000 69000

12 PROVISION FOR REPAIR & MAINTENANCE OF 250VA CONTROL TRANSFORMER COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 65500 65500

13 PROVISION FOR REPAIR & MAINTENANCE OF MULTIFUNCTION METER WITH ITS SPARE PARTS COMPLETE WITH LABOUR AND MATERIALS FOR FIVE YEARS AS PER SPECIFICATION AND DIRECTION OF E/I. 1 EACH 13200 13200

TOTAL = 1105250

E. DETAILS OF OTHER IMPORTANT WORKS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 SUPPLYING , INSTALLATION, TESTING AND COMMISSIONING OF ONE PASSENGER LIFT INCLUDING ALL NECESSARY CIVIL AND ELECTRICAL WORK AT CHAUSA PUMP CANAL 1 JOB 2133440 2133440

2 PROVISION FOR PAINTING OF PUMPS, MOTOR,VALVES, BASEPLATES, SLUICE VALVE. AND ALL COMPLETE JOB PIPE LINE AFTER CLEANING, SAND BLASTING AND DE-RUSTING THEM PROPERLY AND DOING TWO COATS OF PAINT OVER ONE COAT OF PRIMER ALL COMPLETE WITH LABOUR AND MATERIALS AS PER SPECIFICATION AND DIRECTION OF E/I. 2 EACH 1057000 2114000

TOTAL = 4247440

F. DETAILS OF SPARE PARTS

S.NO. DESCRIPTION QUANTITY UNIT RATE AMOUNT

1 COUPLING FOR PUMP 6 EACH 28300 169800

2 COUPLING BOLTS 100 EACH 184 18400

3 ACTUATOR 6 EACH 1041 6246

4 GATE FOR SLUICE VALVE 5 EACH 252000 1260000

5 GASKET 20 EACH 700 14000

6 BEARING 8 EACH 105000 840000

7 BEARING RETAINER 8 EACH 28000 224000

8 BEARING HOUSE 8 EACH 315000 2520000

9 IMPELLER RING 4 EACH 26700 106800

10 IMPELLER KEY 6 EACH 14800 88800

11 CASING RING 4 EACH 115000 460000

12 CASING RING PIN 4 EACH 48200 192800

13 SHAFT EXTENSION KEY 6 EACH 25700 154200

14 SHAFT 4 EACH 248000 992000

15 COUPLING BUSH 6 EACH 48000 288000

16 BATTERY & BATTERY CHARGER 2 EACH 411157 822314

TOTAL = 8157360

TOTAL A+B+C+D+E+F = 41394716.29

TOTAL Rs. = 41808663.45

Total Rs. = 49334222.87

Executive Engineer (M), Irrigation Electrical cum Mechanical Division Walmi Patna

J.E (M) A.E. (M)