Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.5 LAccepted-AOC | L1 | Accepted-AOC Technically qualified L1 bidder | |
| 2 | L2₹60.0 L+₹5.5 L (10.0%)Rejected-AOC EAST KUSHAL NAGAR KAMRUP M GHY 21 ASSAM | KAMRUP | KAMRUP | ASSAM | 781021 | L2 | Rejected-AOC Technically qualified L2 bidder |
Tender Value
₹54.5 L
EMD Value
₹1.1 L
Closing Date
14 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CEO, GMDA
Bhangagarh, Guwahati-05
Development of Swahid Uddyan at Fatasil, Guwahati Balance Work
2022_GMDA_27269_1
GMDA/DEV/67/2021/203
Open Tender
Construction Works
Item Rate
180 days
Guwahati
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹1.1 L
Yes
2 Jan 2023
1 Oct 2022
15 Oct 2022
1 Oct 2022
14 Oct 2022
2 Oct 2022
Amount
EARTH WORK: EXCAVATION, DISPOSAL, BACK FILL.
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) Ordinary soil.
Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (a)With earth or silt or sand obtained by head load with lead upto 90 m and lift upto 2m
GRANULAR SUB BASE
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and cmpacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification ( with an initial lead of 5km) ( inluding cost of testing of materials at site and laboratory as directed by the deptt.) a) Using grading-I Material
PLAIN CEMENT CONCRETE WORKS
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume
REINFORCED CEMENT CONCRETE
Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation,footing,columnswithbasetieandplinthbeam,pilecap,baseslab,retainingwalls,wallsofseptictank,inspectionpitandthelikeandotherworksnotless than 100mm thick up to plinth level. P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required. b) M20 grade concrete or Prop. 1:1.5:3
REINFORCEMENT
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar
SHUTTERING
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in:
Flat Surfaces such as soffits of suspended floors,roofs,landings,canteleverslabs,chajjas, balconies and the like. (ii) Using 25mm thick plank
BRICK WORK
Brickwork in cement morter with 1st class brick including racking out joints and curing complete as directed. (II) In superstructure above plinth level up to 1st floor level. (b). In proportion 1:4.(1 cement:4 sand)
CEMENT PLASTERING
10mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3
SOLING
Providing soling in foundation and under floor with stone/best quality picked jhama brick,sandpacked and laid to level and in panel after preparing the subgradeas directed including all labour and material sand if necessary dewatering, complete. (a).Brick on flat soling.
PIPING
Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm diameter
vii) 63mm diameter
STORAGE TANK
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. (I)2000 Lt capacity (a) Sintex make
VALVES
CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING (b) 65 mm dia
Labour charge for carrying, placing in position, fitting and fixing C.I. sluice valve (with wheel & cap) C.I. reflex valve complete with supplying bolts and nuts, 3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints). (a) 80 mm dia
STORM WATER DRAINAGE
Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) xii) 160mm diameter
SUPPLY RATE OF PVC SPECIALS
UPVC Equal Tee d) 40X40
UPVC Reducing Tee h) 63X40
UPVC Bend 90o
UPVC Bend 120
DRAIN COVER
Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified
Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified
HYDRANT SYSTEM
Providing, Fixing, testing & Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80mm dia, flanged inlet & 63mm dia instantaneous type female outlet complete with cap and chain,twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)
Panel Boards:
Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990
With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
18 S.W.G sheet steel metal boxes:
100 mm x 100 mm x 60 mm deep (Nominal size
200 mm x 150 mm x 60 mm deep (Nominal size
Supplying and fixing of Switch/Socket flush type (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing PVC/ MS board including connection as approved by the Deptt.)complete as required.
Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.)complete as required
Supplying and fixing of 3 Pin Top 6 / 16 Amp on the existing 6 / 16 Amp socket including connection as approved by the Deptt.)complete as required
Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt.
20A Capacity. (ABB, Schneider MG, legrand, Hager make)
Supplying ,installation, testing and commission of the following LED lamp as directed by the department.
Phillip LED Tubes Model Master LED tube 1200 mm 20W840 T8I /Master LED Tube 1200 mm 20 W865 T8 I/MAS LED tube STD 1200 mm 20W865 T8 I or equivqllent as approved by Deppt.
MCCB : Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 30mA sensitivity 4P RCBO(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 4P MCCB (C&S, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
Junction Boxes : Supply including fitting and fixing of outdoor cable Junction Boxes IP 66 halogen free and weather proof for outdoor installation ( with metric knockouts for cable entry) on existing pole with clamp nut &bolts, including all accessories complete as specified and directed by the Deptt.
cable size 10 sq.mm box size 167 x 125 x 82 all in mm
POWER CABLES: Supply and laying of following size PVC / XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
6.00 Sq. mm.4 Core armoured U.G. cable
10.00 Sq.mm 4 Core armoured U.G. cable
25.00 Sq.mm 4 Core armoured U.G. cable
50.00 Sq.mm 3 Core armoured U.G. cable
Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)
6.00 Sq.mm 4 Core U.G. cable in 32mm dia medium duty G.I. pipe
10.00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe
25 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe
50.00 Sq.mm 4 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)
SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) SINGLE compression BRASS GLAND HEAVY DUTY
SINGLE compression BRASS GLAND HEAVY DUTY Size: 7/8"
SINGLE compression BRASS GLAND HEAVY DUTY Size: 1"
SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) copper tube terminal heavy duty BIS 4579
Copper tube terminal heavy duty BIS 4588 Size: 35
Copper tube terminal heavy duty BIS 4588 Size: 50
Earthing
Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.
Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .
Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.
7. 0-40 Amp electro-mechanical counter display 3 Phase 4 wire electronic hybrid energy meter
LED Illumination Fixtures / Lights:
DAI-253-BF-010, IP-65/ IP-66 protected LED Bollard fixture with extrusion Aluminium housing LED 8-12 watt, 100-270 VAC, 50 Hz LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70% of initial lm maintain. Light output in cool white as per engineer choice fixture shall be CE and Compliance. 1)High Power LED Bollard Light 10-12 watt, 100-270 VAC, 50Hz, Height:800-1000 mm
Up lighter: DAI-253-FL-030, IP-65/ IP-66 protected LED Flood Light fixture with Aluminium housing LED 2030 watt, 100-270 VAC, 50 Hz LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70% of initial lm maintain. Light output in Cool/Warm white as per engineer choice fixture shall be CE and Compliance. 1) High Power LED Flood Light 20-30 watt, 100-270 VAC, 50 Hz.(which cover tree height max 5 Meter.)
DAI-253-BSL-003 IP-65/ IP-66 protected LED Bush Light with mounting box and integral driver suitable for 1-3 watt, 100-270 VAC, 50 Hz.LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70% of initial lm maintain. LED Light output in cool white/warm white color as per engineer choice. Fixture shall be CE and Compliance. 1) LED Bush Light - 1-3 watt, 100-270 VAC, 50 Hz .
LED Street lights 45 W-50W,100-270 VAC, 50Hz
7 Mtr. GI Poles for each Street Light
DAI-253-BSL-003 IP-65/ IP-66 protected LED Bush Light with mounting box and integral driver suitable for 1-3 watt, 100-270 VAC, 50 Hz.LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70% of initial lm maintain. LED Light output in cool white/warm white color as per engineer choice. Fixture shall be CE and Compliance. 1) LED Bush Light - 1-3 watt, 100-270 VAC, 50 Hz .
DAI-253-SL-003, IP-65/ IP-66 protected LED Step Light with mounting box and integral driver suitable for 1-3 watt, 100-270 VAC, 50 Hz LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70 % of initial lm maintain. Light output in cool white/warm white color as per engineer choice. Fixture shall be CE and Compliance LED Step Light - 1-3 watt, 100-270 VAC, 50 Hz .
DAI-253-BRL-003 IP-65/ IP-66 protected LED Burial Light with mounting box and integral driver suitable for 1-3 watt, 100-270 VAC, 50 Hz.LED with available in quick connecting cable coupled with various mounting accessories. driver shall be high efficiency having efficiency >85% and in compliance to IEC standard (integral with light fixture).system life of 25000 burning hours with 70% of initial lm maintain. LED Light output in cool white/warm white color as per engineer choice. Fixture shall be CE and Compliance. 1) LED Burial Light - 1-3 watt, 100-270 VAC, 50 Hz .
Conduits
Supply and fixing 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:
Supply and fixing 50 mm dia 2.00mm thick 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:
Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make).
228 mm Cable Tray Size
Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
LAWN MAKING BY TURFING
BED PLANTING
HEDGE PLANTING / EXTERNAL HEDGE
Supplying and planting of suitable plant materials for preparation protective/external hedge (50cmwide) including the preparation of the ground by mixing organic manure and fertilizers per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (A) ADOPTING SINGLE ROW PLANTING METHOD (i) With Duranta
(ii) With Kamini
(iv) With Thuja / Ixora
BIO WALL/GREEN WALL
Supply and installation of Biowall panels at site, plant material, soil mixture, and installation of drip irrigation system. Biowall panel by drilling and fixing the frame directly into wall by instaling on MS iron fabrication. A list of recommended biowall plants to be provided by vendor after considering site weather,temperature, humidity, sun light, heat absorbed or reflected by nearby surfaces such as stone or glass panels, water quality and approved by consultant. Performance guarantee that biowall installation for a period of 3 months after handover for any defect in installation or drip irrigation. 20% of the total plant quantities which are lost or damaged will be replaced during guarantee period.
MREEGEN SAHARIAH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .