OUTSOURCING OF SERVICES FOR MAINTENANCE AND OPERATION OF INTERNAL/ EXTERNAL ELECTRIC SUPPLY SYSTEM AT QR LAB, RADAR SEEKAR AD INTEGRATION, DIIRS AKSHAY CANTEEN MMW DOFI E11U MEMS EHSV PETF MICRO WAVE TOWERS, WAR HEAD AREA, 0210 BULDING INCLUDING CONN

Amount

Outsourcing of services for day to day routine maintenance of LT distribution system such as internal and external electrification, checking and rectifying faults in internal wiring, sub main wiring, light fittings, bulbs, tubes, switches, sockets, AC sockets, call bells/buzzers, switch boards, fans, regulators, highbay/flood light fittings, building security lights, gate lights, garden lights, fountain lights, DB's, MCBs, MCCBs, switch fuse units, main switches, HRC fuse links, change over switches, LT cables, lugs, glands, LT panels, earthing etc., complete including replacement of unserviceable parts/ components with new spares at Radar Seekar, Flight Instrumentation, DIIRS and AD Integration area by providing Two Electricians and One helper per shift of 8 hours for One shift in a day on all days excluding Sundays and Holidays complete all as specified and directed.

All as per item No 1 above but at QR Lab, Akshay Canteen and MMW building area by providing One Electrician and One Helper per shift of 8 hours for One shift in a day on all days excluding Sundays and Holidays.

All as per item No 1 above but at Micro Wave Towers War Head area, E11U, 0210 building by providing One Electrician and One Helper per shift of 8 hours for One shift in a day on all days excluding Sundays and Holidays.

All as per item No 1 above but at MEMS, PETF and EHSV area by providing One Electrician and One Helper per shift of 8 hours for One shift in a day on all days excluding Sundays and Holidays.

Notes for the serial item No 01 to 04: The complaints received from the users duly enclosed in the register with docket number and complaint slip has to be maintained with user signature after satisfactory attending the compliant as a token of completion indicating showing the spares replaced wherever applicable.

All T&P including Hydraulic ladder or aerial access platform mounted on vehicle required for operating, repair and maintenance are deemed to be included in the unit rates quoted.

All stationary for Duty Roster, Attendance register, Wages register, Log sheet book, maintenance record etc., shall be arranged, maintained and submitted by the contractor to Engineer in charge in the first week of every month.

Any loss due to negligence, faulty operation shall be made good by the contractor without any extra cost to the department.

Wage period shall not exceed one month. Wages for all workers employed shall be paid before 7th day of every month through bank account without fail irrespective of whether RAR is claimed or not.

Non compliance on the part of contractor for not making payment of wages to workers as stipulated above shall attract penalty at the rate of Rs 100.00 per shift per worker from RAR/Final Bill. No claim whatsoever on this account will be entertained.

Minimum wages, EPF, ESI, Bonus etc., to the workers shall be paid by the contractor as per Regional Labour/PF Commissioner Gazette Notification including DA all as authorized.

Labour elements for fixing of spares/parts mentioned in this schedule as supply only shall be deemed to include in the unit rate quoted.

The workers employed by the contractor for outsourcing shall be entitled for one day weekly off and the contractor has to provide suitable substitute in the concerned shifts. The unit rate quoted shall be deemed to include for this provision.

As per availability, LED Tube rod required to replace unserviceable ones will be issued under Schedule 'B'.

Supply only 2core 0.5Sqmm PVC insulated, FR PVC round sheathed, flexible copper conductor cable, 1100Volts ISI marked complete all as specified.

Supply only 1.5Sqmm FRLSH PVC insulated, unsheathed, single core, multistranded copper conductor cable, 1100Volts, ISI marked complete all as specified.

All as per item No 6 above but copper conductor cable of size 2.5Sqmm complete all as specified.

All as per item No 6 above but copper conductor cable of size 4Sqmm complete all as specified.

Supply only PVC casing & capping with fittings of size 20mm, ISI marked all as specified.

Supply only Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified.

Supply only Modular Switch 1 way 16Amps, 1 Module, ISI Marked complete all as specified.

Supply only Modular Socket, 6Amp, 2/3 pin combined, 2 Module, ISI Marked complete all as specified.

Supply only Modular Socket, 6/16Amps, 2/3 pin combined, 2 Module, ISI Marked complete all as specified.

Supply only ceiling rose three terminal surface bakelite type complete all as specified.

Supply only electronic fan regulator 100watt, 1 module 240V 50Hz complete all as specified.

Supply only modular plastic surfaces box with metal thread inserts suitable for surface/wall mounting, 1/2 module box complete all as specified.

All as per item No 16 above but 3 module box.

All as per item No 16 above but 4 module box.

All as per item No 16 above but 6 module box.

All as per item No 16 above but 8 module box.

All as per item No 16 above but 12 module box.

Supply only, Modular white cover plate with frame, 1 module complete all as specified.

Supply only, Modular white cover plate with frame, 2 module complete all as specified.

Supply only, Modular white cover plate with frame, 3 module complete all as specified.

Supply only, Modular white cover plate with frame, 4 module complete all as specified and directed.

Supply only, Modular white cover plate with frame, 6 module complete all as specified and directed.

Supply only, Modular white cover plate with frame, 8 module complete all as specified and directed.

Supply only, Modular white cover plate with frame, 12 module complete all as specified and directed.

Supply only Capacitor of 2.5/3.15 Mfd 230 volts.

Supply only Capacitor of 4Mfd 230 volts. Make for item No 29 & 30: Epcos/Tibcon/Bajaj/Havells

Supply only MCB, SP, 6 to 32Amp, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / L&T / IndoAsian C&S / Schneider as approved by GE

Supply only MCB SPN, 40Amp, 240volts, 10KA, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 or equivalent in Siemens / L&T / IndoAsian / C&S / Schneider as approved by GE

Supply only 3pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 03 or equivalent in L&T/Siemens/Schneider/C&S

Supply only 4pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 13 or equivalent in L&T/Siemens/Schneider/C&S

Supply only 4pole 125Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 16 or equivalent in L&T/Siemens/Schneider/C&S

Supply only universal batten for fixing T5/T8 LED tube rods with polycarbonate housing complete all as specified. Make: Havells Cat No REGALBATTENT8UPTO1X22 WSSBSWH or techno commercially equivalent of Phillips / Wipro

Supply only ultra bright LED polycarbonate tube light with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAE2.01213T8SSTL 20WLED865SPC or techno commercially equivalent of Phillips / Wipro

Supply only 15watt LED surface mooting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTOSURFACE1X1PLS15WLED 857S or techno commercially equivalent of Phillips / Wipro

Supply only 9 Watt Ultra bright LED PL-L lamp with very high efficacy suited for installation in existing 2G11 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAPLL222TL9WLED 865SPC or techno commercially equivalent of Phillips / Wipro

Supply only 18 Watt Ultra bright LED PL-L lamp with very high efficacy suited for installation in existing 2G11 lamp holders complete all as specified. Make: Havells Cat No PHOTONULTRAPLL419TL18WLED 865SPC or techno commercially equivalent of Phillips / Wipro

Supply only 15watt LED recess mounted luminaire suitable for Armstrong/POP ceiling with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTO1X1PLR15WLED857S or techno commercially equivalent of Phillips / Wipro

Supply only recess mounting 36W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE2X2PLR18-42WLED865MOD with LEDDRIVER36V36WS or Techno commercially equivalent in Philips/Wipro

Supply only recess mounting 28W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE4X1PLR28WLED 857S or Techno commercially equivalent in Philips/Wipro

Supply only recess mounted 10W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No: INTEGRANEODLR10WLED840S or Techno commercially equivalent in Philips/Wipro

Supply only recess mounted 15W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No: INTEGRANEODLR15WLED840S or Techno commercially equivalent in Philips/Wipro

Supply only recess mounted 24W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No: INTEGRANEODLR24WLED840S or Techno commercially equivalent in Philips/Wipro

Supply only CMRI certified 2X20W LED flame proof tube light fitting with IP65 protection and with all accessories complete all as specified. Make: Crompton Greaves Cat No EXTN2LT8-20 or Techno commercially equivalent in Shyaam/Baliga/Sudhir

Supply only flame proof 60W LED well glass light fitting in die cast Aluminum housing with heat resistant toughened glass IP65 protection, recommended for gas/vapor group of IIA & IIB suitable for operating voltage range of 150V to 265V with a reputed driver, certified by CIMFR, ISI marked complete as specified. Make: Crompton Greaves Cat No FWL1315-60-CDL or Techno commercially equivalent in Shyaam/Baliga/ Sudhir

Supply only suspension mounting 36W LED luminaire with primary suspension kit and main cable, high brightness SMD LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No LICONLP36WLED840SPCGRY with LICONSUSKITWITHMAINSCABLE.

Taking down the existing ceiling fan of any make/ model and sweep for overhauling/servicing after disconnecting carefully cleaning and checking for unserviceable components, replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor flexible chord and shaft etc., including assembling after lubricating the movable components and installing in its original position connecting, testing complete all as directed.

All as per Item No 50 above but Pedestal Fan of any sweep.

All as per item No 50 above but for Exhaust fans and Air Circulator of any sweep and model from any height installed in workshops. Note for item No 50 to 52: Bearing, rubber bush/bolt, gunmetal bush, capacitor, flexible cord, shaft and rewinding shall be measured and paid separately under relevant items.

Supply only rubber bush/bolt/clamps suitable for ceiling fan of any make, model or sweep complete all as specified and directed

Supply only shaft suitable for ceiling fan or exhaust fan or pedestal fan or wall mounted fan or air circulator of any make, model or sweep with necessary machining work complete all as directed.

Rewinding ceiling fans of 1200/1400mm sweep of any make, model including removal of existing burnt windings carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enameled copper conductor of same gauge and similar number of turns as that of existing and connecting the windings, applying insulating varnish and drying the windings thoroughly complete all as directed.

All as per item No 55 above but for Exhaust fan of 230/ 300mm sweep, Pedestal/wall mounted fan of 400mm sweep

All as per item No 55 above but for Exhaust fan of 450mm sweep or Air circulator of 450/600mm sweep.

Supply only ball bearing suitable for ceiling fan/wall mounting fan/pedestal fans of any sweep, make or model complete all as specified.

All as per item No 59 above but for exhaust fan/air circulator of any make or model or sweep. Make for item No 58 & 59: SKF/NBC/TATA/USHA

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan/pedestal fans/exhaust fan of any make, model or sweep complete all as directed.

Supply only down rod for ceiling fan as per site requirement complete all as directed.

M&L, painting of ceiling fan complete in situ or after carrying out repairs with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust complete all as directed.

M/S DIVIJA BUILDERS

SUN LIGHT HOUSE

M/s ANUSHA ENTERPRISES

Maruthi international