GE(S)/M-33/2023-24

Amount

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

Demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls or concrete surface any description etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 12mm thick rendering in CM 1:4 on brick work or concrete surfaces of wall, finishing the surface even and smooth without using extra cement, mixing with and including WPC @ 200ml/bag of cement complete all as specified and directed.

M&L for preparing of old painted surfaces of steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over & incl a coat of red oxide complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.

M&L prepration of new or previously untreated wooden surfaces of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of pink primer, complete all as specified and directed.

S&F for Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F for 100mm wide rubber lining fitted with aluminium powder coated strips for door cill, complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from matel frame including punching or drilling out old glazing pins/spribng clips and providing and fixing new onces exc 1.5 Sqm, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces & including cost of scaffolding, complete all as specified and directed. .

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coats of distemper oil emulsion, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe410-W(Gde E-250) quality A complete all as specified and directed.

M&L for steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachments complete all as specified and directed.

S&F "as in repair" 20mm outer dia stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel finials with adopter for 20 mm dia drapery rod at both ends complete all as specified and directed.

S&F stainless steel peg set of six 480 mm x 30 mm x 4 mm size fixed with machine screws & rowel plug complete all as specified and directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n.exc 15cm thick below or above ground level complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.set oin any type of mortar complete all as specified and directed.

M & L for 25 mm thick P. C.C type B-1, 1:2:4 ( using 20mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed.

M&L for Machine cut kota stone slab flooring not less than 18-20 mm thick laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified.

M&L for false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in sub base finished the surface even and smooth using extra cement complete all as specified and directed

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.

S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete with fittings/fixtures such as switches, sockets, ceiling roses, lamp holders, fan regulators, bells, light fittings etc and making good disturbed surfaces of walls, floors to match with existing specifications and removing UNSV items from site, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including pressed steel sunken terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed. Note : In ceiling portion surface conduit wiring shall be carried out.

M&L for point wiring for but for one 5 pin 6 Amps socket point controlled by one switch 6amps outlet on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable using 1.5 Sqmm in and including PVC concealed non metallic conduit (ISI marked) medium grade not less than 20mm dia with all accessories and including pressed steel sunken terminal boxes(for mounting switches/socket etc.) made of not less than 16 gauge MS sheet vand 6cm dept covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall mouunting good the disturbed surfaces to match with the existing specification complete all as specified and directed (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase,Black for neutral green for earth wire). Note : In ceiling portion surface conduit wiring shall be carried out.

Description all as per srl item No. 43.00 here-in-before but for 3 pin 5 amp socket outlet point on same board controlled by one switch 5 Amps one way, etc complete all as specified and directed.

M&L for point wiring for but for one 5 pin 15 Amps socket point controlled by one switch 15amps outlet on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable using 2.5 Sqmm in and including PVC concealed non metallic conduit (ISI marked) medium grade not less than 20mm dia with all accessories and including pressed steel sunken terminal boxes(for mounting switches/socket etc.) made of not less than 16 gauge MS sheet vand 6cm dept covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 2.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall mouunting good the disturbed surfaces to match with the existing specification complete all as specified and directed (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase,Black for neutral green for earth wire). Note : In ceiling portion surface conduit wiring shall be carried out.

S&F Switch piano flush button, single pole, one way, 6 Amps, 240 Volts AC with polycarbonate body, complete all as specified and directed.

S&F multi socket outlet, 2/3 pin 5/6Amps, flush type, 230 volts AC with polycarbonate body, complete all as specified and directed.

S&F Socket outlet, 6 Pin, 6 and 16 Amps, multipurpose, 2 in 1, flush type, single pole, one way 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 16 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F fan step regulator, step type electronic mini/ delux ,suitable for 1200/1400mm sweep ceiling fan, hum free, 240 Volts and connecting electrically, complete all as specified and directed.

S&F of ceiling rose, surface bakelite, 2 to 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, complete all as specified and directed.

S&F of surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 2 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F of surface mounted LED Bulk Head luminaires 9/10 watts with ABS body & polycarbonate diffuser available in CCT 6500K IP 54 complete all as specified and directed.

S&F LED 9 watt PF>0.90, 230 volts retrofit type complete all as specified and directed. Note : The contractor shall produce LM-79 & LM-80 test reports from NABL accredited lab.

Note for srl item No 55 to 57 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F "in replacement" sheet metal enclosure DBs, double door, single pole & neutra with 200 Amps rated bus bar of 08 way with 240volts IP-54 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F for 240 volts 10KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 Amp in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

S&F for 240 volts 10KA 'B' curve miniature circut breaker (MCB) of single poles, current carrying capacity 6 to 32 Amp in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

M&L for earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable 8cm below and 15cm above the cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty electric cable , with aluminium conductor of size 16Sqmm x 2 core complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all as specified and directed.

LAKSHMI BUILDING INOVATORS

M/S NARESH KUMAR SHARMA

AV ENTERPRISES

M/S CANTILEVER ENGINEERS

Abrol construction co

VOHRA CONSTRUCTION CO

M/S HIMANSHU BUILDERS

Nishikant Mahajan Govt Contractor

Bidder Name

OMKAR SHARMA AND CO

Abrol construction co

Nishikant Mahajan Govt Contractor

AV ENTERPRISES

M/S CANTILEVER ENGINEERS

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS

VOHRA CONSTRUCTION CO

LAKSHMI BUILDING INOVATORS