Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance | -22.56% | ₹2.8 L | L1 | Admitted-Finance |
| 2 | L2₹2.9 L+₹8,975 (3.18%)Admitted-Finance | -20.10% | ₹2.9 L+₹8,975 (3.18%) | L2 | Admitted-Finance |
| 3 | L3₹3.3 L+₹45,459 (16.1%)Admitted-Finance | -10.10% | ₹3.3 L+₹45,459 (16.1%) | L3 | Admitted-Finance |
Tender Value
₹4.3 L
EMD Value
₹8,620
Closing Date
7 Aug 2026, 6:00 pmClosed
EXECUTIVE ENGINEER PWD CITY DN III JAIPUR
EXECUTIVE ENGINEER PWD CITY DN III JAIPUR
Day to Day Repair and Maintenance works in Jyoti Nagar IV and V type Staff Qtrs Jaipur (sanction work) (Joinery work)
2026_CEPWD_580880_3
SHORT TERM NIT 18/2026-27 EE PWD CITY DN III JAIPUR
Open Tender
Repair and Maintenance Works
Percentage
180 days
JAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
EE PWD CITY DN III JAIPUR/ MD RISL BY EGRASS
₹8,620
Yes
14 Aug 2026
1 Aug 2026
10 Aug 2026
1 Aug 2026
7 Aug 2026
1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) | 40 | Sqm | 1,354 | ₹54,160 |
| 2 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 10 | Sqm | 259 | ₹2,590 |
| 3 | Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. | 80 | Sqm | 242 | ₹19,360 |
| 4 | Repair of door, window shutters including cost of material and labour for change of damaged : Aldrop of mild Steel 8" long x 10mm dia | 20 | Nos | 117 | ₹2,340 |
| 5 | Repair of door, window shutters including cost of material and labour for change of damaged : Stopper of Aluminium with Double Rubber Gutka | 30 | Nos | 52 | ₹1,560 |
| 6 | Repair of door, window shutters including cost of material and labour for change of damaged : Aldrop of mild Steel 8" long x 10mm dia | 30 | Nos | 117 | ₹3,510 |
| 7 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm | 15 | Sqm | 679 | ₹10,185 |
| 8 | Renewal of old putty of glass panes (length) | 100 | Mtr | 20 | ₹2,000 |
| 9 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. | 10 | Nos | 116 | ₹1,160 |
| 10 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 100 | Kg | 421 | ₹42,100 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tendernotice_2.pdf
PDF • 3.23 MB
Tender_document_18_3_BSR2026.pdf
Tender Documents • 8.42 MB
BOQ_1032200.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .