Constt. of Block Development Council vovora

Amount

Earth work in excavation by manual means in trenches for foundation drains, pipes, cables, etc. (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan depth up to 1.5 mtr including disposed of excavated earth up to 1 Mtrs from cutting edge, disposed earth is to be leveled and neatly dressed

Providing and laying of dry stone soiling hand packed tightly including all carriages , leads and lifts of materials complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 ( 1 cement 4 coarse sand 8 graded stone agg.) 40 mm nominal size crushed agg. including all carriages leads and lifts of materials complete

Supply and filling RBM under rooms including compaction by ramming ,watering etc including all carriages up to site of work

Providing and laying specified grade of reinforcement cement concrete excluding cost of centering shuttering, finishing and reinforcement all work up to plinth level above in 1 ;1.5 ; 3 mix using 20 mm nominal size Crushed aggregate including all carriages leads and lifts of materials complete

Providing and laying specified grade of reinforcement cement concrete excluding cost of centering shuttering, finishing and reinforcement all work up to plinth level in 1:2:4 mix using 20 mm nominal size Crushed aggregate including all carriages leads and lifts of materials complete

Centering and shuttering including strutting, propping etc. and removal of form for ; (mentioned below from I to v)

i.Foundations , footings , bases for columns

ii.Suspended floor , roofs ,landings, balconies and access plate forms

iii.Lentils, beams , plinth beams , girders,bressuners and cantilevers

iv. Columns , pillars, piers, abutments , posts and struts

v. Edges of slabs and breaks in floors and walls under 20 CM

Reinforcement for RCC work including straightening cutting, bending ,binding , placing in position including all carriages complete Job

Bricks work with common burnt clay F.P.S. (Non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 mix(1 cement’ 6 coarse sand) including all carriages leads, lifts of material complete with Extra for brick work in superstructure above plinth level up to floor (v) level (By manual means.

Providing wood work in frames of doors, windows,Clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length. Imported kail (KD Wood) including all carriages leads, lifts of material complete

Proving 40X5 MM flat Iron hold fast 40CM long including fixing to frame with 10MM Dia Meter bolts , nuts and wooden plugs and embeddings in cement concrete blocks 30X10X15 CM 1:3:6 Mix ( 1 cement 3 coarse sand 6 graded stone aggregate 20MM Nominal size ) complete Job

Providing and fixing 35 mm thick panelled / glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws, including panels / glazing with all fittings / fixture and complete job .

Proving and fixing of 3.5 MM thick glazing with wooden beeding of required size and shape with nails complete job

Providing/fixing 35 mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4 MM in both directions of wire dia 0.63 Mm for door, windows and clerestory windows with ISI marked MS pressed butthings bright finished of required size necessary screws and all other fittings complete job ( K.D wood)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job

Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300mm x 300mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (300mm x 450mm)

Providing and fixing gang saw cut, mirror polished, pre-molded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias, staircase risers and similar locations, of required size, approved shade, color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, molding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade incl skriting wherever required job (18mm Thick)

Providing edge molding to 18 mm marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including all lifts, leads, carriage of the material.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toPrepare the surface even and smooth complete. ( 2mm Thick)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinkable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and color. (Two or more Coats )

Finishing walls with premium acrylic exterior paint of required shade on New work (two or more coats applied @ 1.67 liter/10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including welding etc and applying a priming coat of Approved steel primer all complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts, leads and carriages complete job

Providing and fixing pre-coated galvanized steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing ,valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.0mm thick with zinc coating not less than 350gm/m2

Providing and fixing paneled eaves boarding. 2nd class Kail Wood 300x40 mm (nominal size) complete job

Providing and fixing of soffits made out 12mm thick imported wood planks incl underneath frame work and scaffolding carriage complete (Badloo work )

Providing and fixing of prince make PVC pipes .B type (mentioned below from a to c)

Providing and fixing PVC Fittings. of prince make (mentioned below from a to m)

a)Collar (100 mm)

b)Door Tee (100 mm)

c)Floor Trap (75mm)

d)Plain Bend (75mm)

e)Door bend (75 mm)

f)Collar (75mm)

g)Reducer (75 x 100mm

h) cowel

i)Door Tee (75 mm)

k) Door bend (100 mm)

m) Plain bend 100mm

Providing and fixing C.P Fittings of standard quality . (mentioned below from a to p)

a) Pvc conections 18"

b) 100mm dia c.p.grating

c) Looking mirror ornamental

d) soap case

e) waste pipe

f) C.p. cup

g) C.P. Angle valve.

h) C.P. Bib Cock

i) Cp wall mixer

j) C.P. Basin Mixer .(jaquar)

k) cast iron manholecover (2'-0"x1'-6")

l) CP sink mixer(jaquar)

m) Health fucet

n) Stainless Steel sink 610mmx510mm with CP brass waste

p) Sink waste

Providing & fixing of G.I. pipe complete with G.I fittings and clamps including cutting chases and making the good wall etc concelaed work (mentioned below from a to e)

a)Concealed 15 mm pipe

b) Concealed 20mm pipe

d) external work 15mm pipe

e) external work 20mm dia

Providing & fixing of G.I fittings.of approved quality (mentioned below from a to g)

a. Ball valve 20mm ( brass)

b. Union 15mm

c. Ball valve 15mm ( brass )

d. Union 20mm

e. water mortor 1 Hp

f. Tanky nipple 15mm

g. Tanky nipple 20mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank triple layer with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fittings and the base support for tank

P/F of water heater geyser of standard quality 50ltr capacity incluidng 15amp top and making holes complete job racold or equivalent Gyser (Racold make) 50ltr

P/F of water heater geyser of standard quality 50ltr capacity incluidng 15amp top and making holes complete job racold or equivalent Gyser (Racold make 25 ltr capacity (Racold make)

Providing and fixing of water closet squatting pan (Indian type W.C.) with ( 10 litre capacity) P.V.C. flushing cistern incl. c/o 100mm dia PVC P-bend and c.p. long bend incluidng cutting and making good the wall and floor wherever required( white vitereous china Orissa pattern of size 580x440mm

Providing and fixing of white vitreous china pedestal type water closet european type W.C pan ) with seat and lid and ( 10 litre capacity) P.V.C. flushing cistern incl. c/o 100mm dia PVC P-bend and PVC short bend incluidng cutting and making good the wall and floor wherever required

Providing and fixing white vitreous china flat back wash basin size 550x400mm with 32mm cp waste

Providing and fixing white vitreous pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Construction of brick masonary manholes by way of earth work, bed concrete ,top concrete, in side plastering with necessary channels incl. c/o cast iron manhole cover with frame (750x750mm )

Dry Random rubble stone masonary with bond stone in foundation nallah including all carriages upto Site

m/s m farooq lone

Ab Majeed Reshi

M/S FAROOQ SALES AND SUPPLIERS