Loading
Loading…
Loading…
Tender Value
₹7.1 Cr
EMD Value
₹5.0 L
Closing Date
20 Mar 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
FRTENHM
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Definition of similar Work: "Providing any electrical welding services similar to coach/wagon body repairs OR Fabrication and installation works involving welding on rolling stock in workshops, Production units, Diesel/Electric sheds in Indian Railways OR Fabrication and installation works involving welding in public sector under takings like BHEL, APSRTC, CONCOR etc." Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
5 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(1)Tenderers should attach self attested copy of PAN CARD & Photo Identification in Support of their IDENTITY. (2)The documents attached to the tender document should be clear and legible for evaluation of tenders. Proper care to be taken in this regard.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure -V(A) shall also be submitted by the each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc., as the case may be, Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Copies of TDC & EMD exemption certificates should invariably be uploaded in the list of documents without fail.
The conditions in tender schedule only stands good at any time for the tenders. Irrespective any condition of uploading of documents if specified in ireps site for this tender as Allowed / Not allowed , it is mandatory for uploading of all the documents that are specified in Tender schedule.
Repair, Maintenance and Housekeeping activity at Gonda Sickline & Freight Yard for two year.
12-2025-Mech-FRT-DM
12-2025-Mech-FRT-DM
Open
Works - General
24 Months
Lucknow, Uttar Pradesh
₹0
₹5.0 L
20 Mar 2026
25 Feb 2026
6 Mar 2026
97 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,06,18,222.82 | ||
| — | — | — | Above/ 3345980.00 Below/P | ||
| Cutting / Welding / Repair / fitment of body panel, roof patch / floor | — | 20000.00 | — | — | |
| — | — | — | Above/ 23491303.22 Below/P | ||
| Repair of wagon body doors (LH/RH/FD) | — | 279965.00 | — | — | |
| — | — | — | Above/ 110134.64 Below/P | ||
| Fitment of new wagon body doors Flap on need basis | — | 266.00 | — | — | |
| — | — | — | Above/ 311107.10 Below/P | ||
| Dismantling & fitting of draft gears and CBCs of all types of wagon including Huck bolting / riveting in support plates. [1 Nos. Wagon = 2 Sets] | — | 504.00 | — | — | |
| — | — | — | Above/ 268992.90 Below/P | ||
| Dismantling and fitting of Centre pivot of all types of wagon | — | 900.00 | — | — | |
| — | — | — | Above/ 1007988.96 Below/P | ||
| Making water tight with Putty / Epoxy Sealant on wagon roof, side wall, end wall; gaps, Welding joint etc. | — | 6728.00 | — | — | |
| — | — | — | Above/ 1325271.20 Below/P | ||
| Welding of Wagon under frame safety brackets & minor welding | — | 58400.00 | — | — | |
| — | — | — | Above/ 128648.52 Below/P | ||
| Knuckle pin replacement with APD | — | 3276.00 | — | — | |
| — | — | — | Above/ 43000.65 Below/P | ||
| Striker casting wear plate replacement | — | 1095.00 | — | — | |
| — | — | — | Above/ 22776.60 Below/P | ||
| Side bearer pad replacement | — | 580.00 | — | — | |
| — | — | — | Above/ 802486.08 Below/P | ||
| EM pad changing | — | 23360.00 | — | — | |
| — | — | — | Above/ 1036147.20 Below/P | ||
| Brake Block attention (involving brake block replacement, key replacement etc.) | — | 52800.00 | — | — | |
| — | — | — | Above/ 12920278.80 Below/P | ||
| Door opening / closing & Securing [1 Door = 2 Swing + 1 flap] | — | 877200.00 | — | — | |
| — | — | — | Above/ 402748.67 Below/P | ||
| Retro-fitment of twin pipe system in BCN Wagons | Wagon | 365.00 Per | — | — | |
| — | — | — | Above/ 75267.72 Below/P | ||
| Replacement of Distributor Valve, Common Pipe Bracket, Control Reservoir | — | 180.00 | — | — | |
| — | — | — | Above/ 16884.12 Below/P | ||
| Replacement of Brake Cylinder | — | 120.00 | — | — | |
| — | — | — | Above/ 332949.55 Below/P | ||
| Replacement of Cut off Angle Cock & Hose Coupling | — | 2491.00 | — | — | |
| — | — | — | Above/ 35778.60 Below/P | ||
| Replacement of Slack Adjuster Barrel | — | 150.00 | — | — | |
| — | — | — | Above/ 3814.47 Below/P | ||
| Replacement of Automatic Pressure Modification | — | 30.00 | — | — | |
| — | — | — | Above/ 203061.60 Below/P | ||
| Replacement of Double foot step | — | 2160.00 | — | — | |
| — | — | — | Above/ 218052.00 Below/P | ||
| Cost for Lock Bolting of Draft gear/CBC support plate, C.P.Top/Bottom, door check spring, Striker casting/ Back stopper | — | 10800.00 | — | — | |
| — | — | — | Above/ 531900.00 Below/P | ||
| Riveting (Quantity unit "per Unit " is treated as per rivet) | — | 3600.00 | — | — | |
| — | — | — | Above/ 52104.00 Below/P | ||
| Replacement & Fitment of door Hinge Foot with door hinge pin For Flap Door of wagon @ 20% | — | 240.00 | — | — | |
| — | — | — | Above/ 85900.32 Below/P | ||
| Replacement of striker casting (i) Cutting of yoke pin support plate lock bolts (ii) Dropping of yoke pin support plate (iii)Removing yoke pin & Dropping of coupler body N(iv) Cutting of lock bolts of striker casting and dropping of striker casting (v) Fitment of new striker casting with lock bolting (vi) Re-fitting of coupler body & yoke pin (vii) Lock bolting in yoke pin support plate (viii)Replacement /repair of Operating handle /bearing piece/ bracket. Note-Striker casting and lock bolts | — | 48.00 | — | — | |
| — | — | — | Above/ 2897749.60 Below/P | ||
| Lifting of Wagon body and Stripping of bogie components (Body lifting, Trolley shifting, Wheel shifting) | Wagon | 2920.00 Per | — | — | |
| — | — | — | Above/ 1738976.80 Below/P | ||
| Lowering of wagon body over trolley (After repair work) (Body lowering, Trolley shifting, Wheel shifting & fitting of shackle lock, CP Washer, lock pins & APD) | Wagon | 2920.00 Per | — | — | |
| — | — | — | Above/ 854187.60 Below/P | ||
| Side bearer wear plate changing | — | 2190.00 | — | — | |
| — | — | — | Above/ 191960.80 Below/P | ||
| Push rod and brake beam safety bracket | — | 1460.00 | — | — | |
| — | — | — | Above/ 81567.36 Below/P | ||
| Fitment of deficient hopper doors in BOBYN wagons | — | 96.00 | — | — | |
| — | — | — | Above/ 23990.40 Below/P | ||
| Minor door repairs of BOBYN wagon | — | 240.00 | — | — | |
| — | — | — | Above/ 1498799.50 Below/P | ||
| Brake van side looking glass replacement | — | 3650.00 | — | — | |
| — | — | — | Above/ 46128.00 Below/P | ||
| Changing of western commode in brake van | — | 200.00 | — | — | |
| — | — | — | Above/ 2113291.60 Below/P | ||
| Wheel changing work (Removal of wheel from wagon and fitting of turned wheel in wagon ) | — | 2920.00 | — | — | |
| — | — | — | Above/ 856710.00 Below/P | ||
| Fitment of shackle lock "Quantity treated as per unit set" | — | 10800.00 | — | — | |
| — | — | — | Above/ 211100.00 Below/P | ||
| Fitment of side frame key "Quantity treated as per unit set" | — | 10000.00 | — | — | |
| — | — | — | Above/ 2117000.00 Below/P | ||
| Garden development | — | 1460000.0 0 | — | — | |
| — | — | — | Above/ 589110.00 Below/P | ||
| Rag Picking, Grass Cutting ,Scrap Collection in Bins at Yard | — | 11782200. 00 | — | — | |
| — | — | — | Above/ 259128.00 Below/P | ||
| Supply of RIVIT GUN MACHINE | — | 2.00 | — | — | |
| — | — | — | Above/ 1649640.00 Below/P | ||
| Supply of HUCK BOLT MACHINE make -AVLOCK , CRIMPWELL as per annexure -G of tender document | — | 2.00 | — | — | |
| — | — | — | Above/ 3521520.00 Below/P | ||
| Cleaning of ROH shed and adjoining Area | — | 26280000. 00 | — | — | |
| — | — | — | Above/ 234899.40 Below/P | ||
| Cleaning of offices and rooms | — | 1460000.0 0 | — | — | |
| — | — | — | Above/ 85541.40 Below/P | ||
| Cleaning of Toilets | — | 219000.00 | — | — | |
| — | — | — | Above/ 1960488.00 Below/P | ||
| Stencilling of wagon details on both side of wagons (Item Qty. is number of wagons) | — | 14600.00 | — | — | |
| — | — | — | Above/ 1072359.69 Below/P | ||
| Assistance for scrap removal & warranty segregation work for 730 days (Required @ 02 Staff) | — | 1.00 | — | — | |
| — | — | — | Above/ 1608538.47 Below/P | ||
| Assistance in Air brake testing & repair work for 730days. (Required @ 03 Staff) | — | 1.00 | — | — | |
| — | — | — | Above/ 94105.20 Below/P | ||
| Replacement & fitment of Door check spring @ 2 per wagon | — | 2040.00 | — | — | |
| — | — | — | Above/ 136349.93 Below/P | ||
| Stripping and Fitment of wagon body doors(LH/RH) | — | 533.00 | — | — | |
| — | — | — | Above/ 2504.15 Below/P | ||
| Replacement of Isolating cock with/without vent | — | 50.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TDSicklineyardmaintenancfinal25.02.pdf
ATTACHMENT
TDSicklineyardmaintenancfinalSr.pdf
ATTACHMENT
TDSicklineyardmaintenancfinal25.02.pdf
CORRIGENDUM
TDSicklineyardmaintenancfinalSr.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .