864/WS-25/2022-23

Amount

Repair and Replacement of following components of Table Office Offrs steel (FD-1003):-

Provn and fixing of top of pre-laminated particle board one side teak faced 18mm thick duly beaded 4mm thick of teak wood all around and as per drg complete all as specified and directed. Make : Bhutan/Ecco/Deco/Novapan/Action Tesa.

Provn of replacement of drawers of table wherever necessary complete all as specified and directed.

Provn and fixing of rubber shoes to the bottom of legs of the table office Offrs steel as approved by Engr-in-Charge.

Provn of supply and fixing of handle of drawer table office Offrs steel as approved by Engr-in-Charge.

Scratching of old paint and removing of foreign elements and supply putty, re-paiantng the whole table with one coat of OG paint over a coat of primer of paint complete all as specified and directed. Make: Nrolac/Asian/Berger.

Sofa Set Cushioned Duly Covered with Tapes Tapestry/ Velvent Cloth (FD-281/FD-1113):- Repair /Replacement of new components of teakwood duly finished and french polished to sofa set 4/5 seater including taking down / dismantling old unserviceable / broken parts, complete all as per drawing as specified and directed by Engineer-in-charge

Legs size 70mm x 35mm in section, complete all as shown on drg.

Front/ rear rail of size 35mm X 100mm in section 1535mm long, complete all as shown on drg.

Side rail of size 35mm X 100mm in section, 500mm long, complete all as shown on drg.

50mm x 20mm in section wooden battens of 500mm long, complete all as shown on drg.

30mm x 50mm in section wooden battens of 500mm long, complete all as shown on drg.

Repair /replacement of 100mm thick of 32 density cushion foam of size 530mm x 500mm covered with best quality tapestry cloth, rate not less than Rs. 350.00 per Metre. Make : sleepwell / Kurl On.

Replacement of tapestry cloth of old cushion of sofa set, rate not less than Rs. 350.00 Per metre.

French polish of repaired sofa set 4/5 seater complete after scratching of old surfaces with emery paper and applying two coats of french polish including preparation of surfeaces.

Hat Stand with Mirror (FD-233, FD-362):-

Provn/Fixing of brass of Hooks 150mm of dia had stand as per sample approved by Engr-in-Charge.

Provn of new mirror 5mm thick as per size of drg for hat stand after taking out the blind mirror and properly fixing with beading as per drg.

Provn of Key hooks for hat stand, complete all as specified and as dirrected.

Replacement of born out block board of hat standing with pre-laminated particle board exterior grade type-II and fixing hooks and mirror as per drg and making the hat stand serviceable with teak wood edging all round, complete all as specified and as directed.

Chair Writing (FD/E6/Map/12):-

Repair and replacement MS tubular frame made out of 25mm x 10mm as shown on drg.

Repair and replacement of One piece Armrest made of black integral skin Polyurethane with 75-85 shore 'A' hardness & reinforced with ms insert it shall be scratch and wheather resistant both hand-rest sections to have slope towards fornt all shown as per drg.

Repair and replacement of back of chair writing with polyurethane foam shall be 50mm thick and shall be upholstered with tepastary cloth of rate not less than Rs 300 and all as shown on drg.

Repair and replacement of seat of chair writing with polyurethane foam shall be 50mm thick and shall be upholstered with tepastary cloth of rate not less than Rs 300 and all as shown on drg.

DressingTable Ladies (FD/Map-II/02):-

Repair and Replacement of frame of looking mirror with first class teak wood alround the mirror 25x20mm all as shown on drg.

Replacement of old handle with new 50mm long D shaped stainless steel handle all as shown on drg.

Replacement of old telescopic channel with new telescpic channel provide for smooth running of drawer all as shown on drg.

Replacement of old shutter of table dress ladies with new shutter size 400x350mm of pre-laminated particle board with S/S piano hinges all as shown on drg.

Replacement of old broken looking mirror with new looking mirror size 1232x450x5mm make Modi Guard /Atul all as shown on drg.

Replacement of old broken ply 6mm with new plywood 6mm on back of table dressing ladies all as shown on drg.

Repair and replacement o front drawer of table dressing ladies with new drawer made of pre-laminated particle board 18mm are as shown on drg.

DressingTable Gents (FD/Map-II/02):-

Replacement of old broken looking mirror with new looking mirror size 590x800x5.5 mm Modi guard/ Atul all as shown on drg.

Replacement of broken back plywood with new plywood 12mm thick all as shown on drg.

Replacement of old broken frame of mirror table dressing gents with new frame made of 50x35mm teak wood all as shown on drg.

Table Bed Side (FD/E6/MAP/15) 'R':-

Repair/Replacement of frame shall be 18mm square ms pipe of wall thickness 18 guage (500mm front) 600mm back frame)

Repair/replacement Side of table bed side shall be 18mm thick pre-laminated perticle board with PVC edging as per drg.

Repair/replacement Top of table bed side shall be 18mm thick pre-laminated perticle board with PVC edging as per drg.

Repair/replacement of 6mm ply wood commercial shall on back of table bed side all as shown on drg.

Replacement 100mm 'D' Squared stainless steel handle with new 100mm 'D' Square stainless steel handle as per drg.

Replacement of unserviceable drawer with New drawer of pre-laminated particle board front and inside with 12mm thick plywood commercial size all as shown on drg.

CHARPOY D/B STEEL PLY TOP FD-CESZ/SK/417/ 5:

M&L for welding of broken parts of steel frame of charpoy D/B steel.

S&F nut & bolts of specified shape size as existing to charpoy D/S steel ply top.

M&L for painting of charpoy D/B steel with a coat of synthetic enamel paint aluminum to get glossy finish

Removing of old unsv plywood from charpoy D/B steel and S&F new plywood BWR Grade 12mm thick 6’x3’ size Make- Green ply/Kit ply/National/Century.

CHARPOY GI PIPE : FD-220

Dismantling old unserviceable long rail from charpoy GI pipe and S&F of new long rail of GI tubing 32mm Bore medium grade ISI marked duly threaded at both ends as per drawing. Make : TATA/JINDAL/PRAKASH SURYA.

Dismantling old unserviceable short rail from charpoy GI pipe and Cutting, threading & fixing of old unserviceable long rail retrieved from item No. 9.01 above and converted into two short rails.

Dismantling old unserviceable legs from charpoy GI pipe and Cutting, threading & fixing of old unserviceable short rails retrieved from item No. 9.02 above and converted into two leg. One end threaded and other end provided with 40mm dia 3mm thick MS sheet by continuous welding. MNF clamp shall be provided by welding as specified in drawing and painted with black enameled paint.

Removing of old unserviceable 3 way elbow and supply and fixing of new 3 way elbow GI 32mm bore ISI Marked weight not less than 400 gram each.

Removing of old unserviceable GI Check nut from charpoy GI pipe and supply and fixing of new GI Check Nut 32 mm bore weight not less than 100 gram each.

Removing of old unserviceable Nylon Newar/plywood from charpoy GI pipe and supply & fixing 12mm thick, BWR grade, 7ply type BB, plywood commercial 7`x3` size on top of charpoy GI pipe and fixed with appropriate size nut & bolts with double washers. One centre stiffner of flat iron 40mmx6mmx900mm long shall be welded to long rails. 08 Nos hole shall be provided by drilling to frame of charpoy GI pipe all as directed by Engr-in-Charge. Make of ply Green/Kit ply /National/ Century

CHAIR REVOLVING STEEL WITH ARMS:

Removing of unserviceable cushion seat, Padded Back with upholestered Leather/Tapestry Cloth, Padded cushion of Arms and providing New material in superior quality and repair/removing of unsv parts of titting Mechanisam with wheel system and providing in serviceable condition duly repaired in all respect as directed by Engr-in-Charge

Replacement of bearing of revolving chair

Replacement of unsv wheel. Make- Johnson

Replacement Hydrolic fitting as directed by GE/Engr-in-charge

Replacement of Base assembly of chair revolving as exsiting and as directed by Engr-in-charge

CHAIR COMPUTER:

Removing of unserviceable cushion seat, Padded Back with upholestered Leather/Tapestry Cloth, Padded cushion of Arms and providing New material in superior quality and repair/removing of unsv parts of titting Mechanisam with wheel system and providing in serviceable condition duly repaired in all respect as directed by Engr-in-Charge

Replacement of bearing of revolving chair

Replacement of unsv wheel. Make- Johnson

Replacement Hydrolic fitting as directed by GE/Engr-in-charge

Replacement of Base assembly ofchair revolving as exsiting and as directed by Engr-in-charge

CHAIR DINING LONG BACK WITH CUSHION (FD-357/MAP-II/04) :

Dismantling of existing unserviceable rear leg & S & F new rear leg of lst class seasoned wood without damaging other adjacent parts of chair dining long back with cushion all as specified and shown on drawings.

Front leg complete all as specified and directed and as shown on drawings.

Back rail of seat complete all as specified and directed and as shown on drawings.

Centre stiffener complete all as specified and directed and as shown on drawings.

Removing of old unserviceable cushion from seat and S & F of new cushion in the size of 18'' x 18'' x 75mm of density 40 which shall be covered with superior quality leatheriest rexene with best upholstery to seat of chir dining Make: Sleepwell /Feather foam /Kurlon Cushion.

M&L for polishing to complete chair after preparation of smooth surfaces complete all as specified and directed

M&L for preparation, screatching of old plant and removig of dents (where necessary) and applying two coats of synthetic enamel paint OG/Smoke Grey in colours on following articles/furnitures in MD/OTM accn complete all as specefied and as directed:-

Amirah Large Steel

Almirah Medium Steel

Locker Bedside Steel

Table Office Clerk Steel

Table Office Offr's Steel

Table 3'x2' W/ Drawer Steel

Table Bed side Hosp

Teapoy Verandah

Chair Verandah

M&L for preparation and polishing of following wooden furniture in MD/OTM accn after cleaning of whole surfaces of all items filling putty where required and smoothening of surface with emery paper complete all as specified and as directed:-

Chair Dinning

Chair Writng

Chair Easy

Table Peg

Table Bed Side Map FD-276

Hat Stand with Mirror

BooK Case

Side Board

Table Centre

Sofa Set 3 Pcs to seat 05 pers FD-281/ FD-1113

Sofa Set 4 Pcs FD-281/ FD-1113

Bed Hard

Table Dinnig 06 Pers

Table Dinnig 08 Pers

Table Writing

Teapoy Wooden

DUKE CONSTRUCTION

M/S Charan Singh and Sons

M/S INVOGUE ST ENTERPRISES

M/S B A Traders