Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹15.0 L+₹56,150 (3.90%)Rejected-Finance R G BARUAH ROAD NEAR SHIV MANDIR GUWAHATI AIRPORT GUWAHATI 781015 | KAMRUP METRO | ASSAM | 781015 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹15.8 L+₹1.4 L (9.45%)Rejected-Finance AZARA GOSALPARA DIST KAMRUP M GUWAHATI 781 017 ASSAM | KAMRUP METRO | ASSAM | 781017 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹16.8 L+₹2.4 L (16.9%)Rejected-Finance AZARA GUWAHATI DIST KAMRUP M ASSAM 781 017 | KAMRUP METRO | ASSAM | 781017 | L4 | Rejected-Finance Other than L1 | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-declared as UN-ENLISTED by HQ CWQ (AF) Borjhar vide letter No 8306/E/GUW-54(2010)/103/E8 dt 25 Aug 2023 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
14 Aug 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati-15, Assam, Pin- 781015 Tele 0361 - 2840127
WELCOME MAINTENANCE AT OMQs AND SINGLE OFFICER ACCN WITH ALLIED WORKS AT 19 WING AF UNDER GE (AF) BORJHAR
2023_MES_608838_1
8349/BOR/E8
Open Tender
Civil Works
Item Rate
330 days
GE (AF) Borjhar
MES Contractor enlisted as Class E category a (i) having deposited Standing Security of Rs 50,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
6 documents required · 6 mandatory
₹500
Yes
GE (AF) Borjhar
₹50,000
Yes
21 Feb 2024
13 Jul 2023
16 Aug 2023
13 Jul 2023
14 Aug 2023
27 Jul 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified & directed.
M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed.
M&L for 50 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, 12 mm wide and 50 mm deep joints shall be provided along the wall and bays and same shall be filled with mastic filling to full depth comprising mixture ofheared blown bitumen 85/25 grade and two parts sand, complete, all as specified and directed.
M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified & directed.
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified & directed.
M&L for 50 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, 12 mm wide and 50 mm deep joints shall be provided along the wall and bays and same shall be filled with mastic filling to full depth comprising mixture ofheared blown bitumen 85/25 grade and two parts sand, complete, all as specified and directed.
M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified & directed.
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified & directed.
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified & directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete, all as specified & directed . Note : - Supply only water proofing compound shall be measured and paid for separately.
Supply only integral water proofing compound (ISI marked).
M&L for plain cement concrete (1:2:4) type B1, using 20 mm graded crushed stone aggregate as in coping, benching including necessary form work, complete, all as specified and directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed.
M&L for glazed ceramic tiles (coloured)of size 350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar (1:4), complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete, all as specified & directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4), complete all as specified & directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified & directed.
Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description, complete all as specified & directed.
M&L for factory made 60-80 mm thick machine pressed precast cement concrete coloured interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator, complete all as specified & directed.
M & L for 50 mm th sand cushioning, joiint of block filling with dry sand and complete witn machancical vibrator complete all as specified.
M&L for Prepolished designed and coloured chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx22 to 25mm thick set & jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement, complete all as specified & directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets, complete all as specified & directed.
M&L for Provision of gysum board of 9mm thick ceiling tiles size 595mmx595mm for including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 2.18 mm thick GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions. complete all as specified and as directed by Engineer-in-Charge. Make :--(i) Aluminium section : -- INDALCO/ HINDALCO/ JINDAL (ii) PERFORateD /SEMIPERFORateD TILES :--- ARMSTRONG/ LAFARG
Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed .
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed .
M&L for preparation of old painted plastered surfaces of any description over 10cm in width or girth and applying one coat of priming paints over one coat of plastic emulsion paint of approved shade/tint, complete all as specified & directed.
M&L for preparation of new plastered surfaces of walls and applying finished smooth coat of 3 mm thick white wall care putty to wall or ceiling surfaces, complete, all as specified & directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint, complete all as specified & directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of chalk whiting, complete, all as specified & directed.
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint, complete all as specified & directed.
M&L for 50 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, 12 mm wide and 50 mm deep joints shall be provided along the wall and bays and same shall be filled with mastic filling to full depth comprising mixture ofheared blown bitumen 85/25 grade and two parts sand, complete, all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified & directed.
M&L for 50 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, laid to slope of 1:30 in alternative bays not exceeding 3 meter in length, 12 mm wide and 50 mm deep joints shall be provided along the wall and bays and same shall be filled with mastic filling to full depth comprising mixture ofheared blown bitumen 85/25 grade and two parts sand, complete, all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceiling including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete, all as specified & directed.
S&F in repairs Mirror cabinet (PTMT) with mirror size 350 mm x 450mm fixed on wall with cadmium plated brass screws, complete all as specified & directed.
S&F in repairs sheet glass shelf assembly with chromium plated bracket guard and railing fixed on wall with PVC rawl plug 12cm wide & chromium plated brass screws, complete all as specified & directed. Make: Cera Cat No. 108 or Equivalent make as per list of make attached in Particular specification.
S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. Make: Cera Cat No. 101 or Equivalent make as per list of make attached in Particular specification.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed.
S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & directed.
S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms), complete all as specified & directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete all as specified & directed.
S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union, complete all as specified & directed.
S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & directed.
S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and directed by Engineer-in-charge .
Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc., complete all as specified & directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceillings or laid in floors complete all as specified and directed.
M & L reparing of RCC projection chajja, roof, roof facia, celing by scrapping, cutting derusting and cleaning exposed reinforcement surface of damaged loose RCC surface and applying neat cement slurry @3 Kg/Sqm and filling the surface with cement plaster 1:3 one or two layers as reqd or PCC 1:2:4 as directed by engr in charge with or withour facia and smooth finished and smooth edges incl two coat of finished to mathch with the existing surface at any height and any height and in any situation including necessary form work complete all as specified.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed.
S&F aluminium anodised powder coated frame for doors, windows, ventilators of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed.
S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete, all as specified & directed.
S&F in repairs mild steel decorative and colour coated curtain rail, 20mm bore complete all as specified & directed.
S&F Brackets decorative and colour coated suitable for 20mm bore complete all as specified & directed.
S&F in repairs in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long
S&F in repairs Toilet paper holder , viperous china box type complete all as specified & directed
S & F in repairs hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified.
M/s Vishnu Enterprises
M/s Priyanka Construction
M/S RUPDEEP ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .