8834/2021-22/E8

Amount

M&L for drainging out water from semi undergroung water storage tank of capacity 5000 Gallon scraping out bleachin residual, sediments, sand, fungues scaling etc from inside, bottom and wall of water storage tank with the help of wire brush, steel Patti broom and jute bags and taking out same from the water storage tank and throwing at a distance not less than 25 mtr away from the water storage tank, cleaning inside the water storage tank and then washing and flushing out with fresh water including area cleaning of around the water storage tank all bushes/leafs/shrubs till the entire satisfaction of Engr-in-Charge and writing the date of cleaning on water tank wall with black/white enameld paint complete all as specified and directed by Engineer-in-Charge. (At Bde Area - 02 Nos)

All as per above srl Item No. 1 here in before but 10000 Ltr Capacity PVC tank including changing of broken tank cover with locking arrangement complete all as specified and directed by Engineer-in-Charge. (At Bde JCO Mess area - 02 Nos)

All as per above srl Item No. 1 here in before but 10000 Ltr Capacity PVC tank including changing of broken tank cover with locking arrangement complete all as specified and directed by Engineer-in-Charge. (At MH Area - 01 Nos. Khad Area - 01 No)

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in Hard/dense soil including taking out and laying of GI pipe complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point.

M&L for Taking up or down galvanized steel tubing with complete fitting for refixing or removal of worksite complete all as specified and directed by Engineer-in-charge.

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(d) 40mm bore

(e) 50mm bore

(f) 80mm bore

(g) 100mm bore

Supply and laying in trench/fixed on wall/floors galvanized steel water tubing medium grade ISI marked of the following sizes incl all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. complete all as directed . Make Jindal/Tata/Prakash Surya/Zenith. Note :- Necessary excavation and earth work shall be measured and paid separately

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(e) 40mm bore

(f) 50mm bore

(g) 80mm bore

(h) 100mm bore

Laying only in trench/fixed on wall/floors galvanized steel water tubing medium grade ISI marked of the following sizes incl all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc complete all as directed . Make Jindal/Tata/Prakash Surya/Zenith. Note :- Material are issued by department for under free for laying and necessary excavation and earth work shall be measured and paid separately

(a) 20mm bore

(b) 25mm bore

(c) 40mm bore

(d) 50mm bore

(e) 80mm bore

(f) 100mm bore

S&F gunmetal globe or gate valve with iron wheel head screwed bolt ends for iron pipe of the following sizes complete incl taking down old gate valves all as specified and directed by Engineer-in-charge. Make : Leader/Zoloto

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(d) 40mm bore

(e) 50mm bore

Taking out U/S CI sluice valve for the following sizes, supply and fixing new CI sluice valves Class PN1.6 confirming to ISI with flaged ends both ends with gun metal/steel spindle, round wheel incl jointing materials complete all as directed. Make Sant/Durga/Kirloskar/Kartar/Upadhyay ISI :-

(a) 80mm bore

(b) 100mm bore

Removing the existing sluice valve of the following sizes and takinng out the worn out gate and spindle refixing back the gate supply and fixing the new spindle made out of stainless steel rod of suitable size to fix the existing gate inc check nut regrinding of the gate fixing of nuts bolts gaskets etc complete all as specified:

(a) 80mm bore

Supply and fixing Ball brass valves high pressure with polythene flote and flynut complete secewed for iron pipe or brass feerrule 20mm dia including taking down u/S valve complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting the existing CI/GI pipe 80/100 mm bore or screwing existing CI/GI pipe for addn or altn as required on site including GI fiitings complete all as directed. Note: Necessary earth work shall be measured and paid separately.

Taking out/lifting up submersible pump set with comlete pipe of capcity 5 HP with 32mm dia bore and submersible cable from 125mm casing pipe,from bore well having upto 110 Mtr depth and lowering complete including lowering pupset after repair complete and testing all specified and directed by Engineer-in-Charge.

M&L foe transportation of defective submersible pumping set of 5 HP capacity to nearset wokshop and return back after repair and reassembling the pump set complete all as specified and directed by Engineer-in-Charge.

M&L for Rewinding of Submersible pump capacity 5 HP with super enammeled copper winding wire of existing size applying insulating varnish drying up by heating for improving insulation resistance, painting with one coat of synthetic enamal paint complete all as specified and dircted by Engineer-in-Charge.

Repairs to Mechanical water level indicator including replacing steel wire rope, floot valve and welding of broken stand, scrapping of existing paint and painting with enamel paint over a coat of redoxide and marking of level for sump of any capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of MU-G6 DOL Starter on line starter suitable for submersible pump, 6 Hp 4.5 KW 3 phase including contol wiring & motor protector assembley having dry run protection, phase sequence corrector, earth leakage protection, single phase protection, high voltage and low voltage, time delay power programme time switch complete Model No ;- MU-G6 DOL Starter , Cat No. SS97756 make ;- L&T all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Single phase preventer Relay (9032) having dry run protection, phase swquence corrctor, earth leakage protection, single phase protection , high voltage and low voltage , time delay power on programme time switch suitable for 5 HP Submersible pump set of make :- SPPR type SDz5,415 V (For MU-G15/20/20H) Cat No. XM818090000 of L&T or equivalent complete all as specified and directed by Engineer-in-Charge.

M&L for LED display PVC board for Bde area water supply installtion and inside the borad moulded letter for writing 75/150 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE (BOREWELL WATER SUPPLY INSTALLATION AT BDE AREA) " on top of the board with one side MES Logo and another side div sign on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete all as specified and directed by Engineer-in-Charge.

M&L for LED display PVC board for Bde area water supply installtion and inside the borad moulded letter for writing 75/150 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE (WATER SUPPLY INSTALLATION AT BDE AREA) " on top of the board with one side MES Logo and another side div sign on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete all as specified and directed by Engineer-in-Charge.

M&L for LED display PVC board for MH Dalhousie water supply installtion and inside the borad moulded letter for writing 75/150 mm hight illuminated after provide to power supply for the board and letters are display on the board for " AGE (I) DALHOUSIE (BOREWELL WATER SUPPLY INSTALLATION AT MH AREA) " on top of the board with one side MES Logo and another side div sign on the board complete with fixing arrangement of the board in the ground with suitable size Angle iron frame and should be min.1.5mtr above ground level and 100mm bleow ground level with proper grouting by using of PCC work including exc. and removel of soil complete all as specified and directed by Engineer-in-Charge.

M&L construction of brick masonary valve pit built wn cement mortar 1:6 including all excavation and earth work in any type of soil and disposal of surpluse soil to a distance not exc. 50 mtr all as directed by Engineer-in-charge including 10mm thick plastering internally in CM 1:4 and flush pointing in same mortar to brick work externally as work proceeds and cement concrete in foundation PCC (1:4:8) type D-2 15 cm thick & PCC 1:3:6 type C-1 coping, including 75 mm thick & hard core of gauge and exc. 63mm using broken stone /bolder, MS sheet cover 3.15 mm thick MS angle iron frame, handle locking arrangement and painting to steel surfaces including dismantling of old valve pit complete all as specified and directed by Engineer-in-Charge. incl necessary excavation earth work of the following sizes :-

(a) 900 mm x 900mm x 900mm.

(b) 1200mmx1200mmx1200mm

M&L Rolled mild steel in compound girders and stanchions lattice girders, arial masts, staging and the like including caps , bases, splices etc. built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates,wire mesh etc. conforming to Fe 410-W (Gde-E-250) quality -A, for fabrication of shed of pump room with painting of surface for one coat of primer and two coat of enamenled paint all as specified and directed by Engineer-in-Charge.

Supply only chlorine chemical test kit in replacement of old u/s kit for testing of water complete all as specified and directed by Engineer-in-Charge.Make: Declibac Tech. Pvt Ltd. or equivalent.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

M&L 15mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for preparation of new distampered surfaces of walls and applying two finsishing coat of oil bound distamper (oil emulsion ) on walls, incl 3mm thick wall care putty, complete all as specified and directed

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

M&L 75mm thick PCC type C-2 (1:3:6) using 40mm graded stone aggregate as in sub-base complete all as sprecified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & raming earth/ briken rubble mixed with earth around, in layers n. exc. 25 cm watering, & removing surplus soil to a distance n exc 50m & making good surface in Hard/ldense soil. complete all as specified and directed.

S & F mild steel security chain link fancing 60mm x 60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating including binding wire complete all as specified and directed

M&L 75mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate as in sub floor, sub, floors and pavings etc complete all as sprecified and directed

M&L for chequred cement concrete tiles 20cm x20cmx25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and pigment including 15 mm thick screed bed in CM 1:6 including taking down old surface complete all as specified and directed

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 25 x 4mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate),"mild steel angle iron frame" made out of MS angle iron of size 40x40x6mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 40mm dia medium grade pipe for watering 40mm dia light grade, GI pipe for lead protection in and including alternate layers of charcoal dust and common salt complete all as shown in electrical "plate No '3' and connected to earthing test point all as specified and indicated including testing on completion including retrieving old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing complete all as specified and directed.

m/S Varun Gupta