Remaining Civil works at 132 KV Sub Station Rudhauli Basti

Amount

Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)

Add to Earth work (CSI No. 4.01 to 4.03) for every additional 30m lead or part thereof or for every additional 1.5M lift or part thereof. (CSI No. 4.04)

River Bed Fine Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05)

Clearing jungle including uprooting of rank vegetations, grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08)

Earth filling under floors and/or corporation area including cost of earth obtained with in 8 km distance outside corporation area including all taxes (if any) and its carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10)

Concrete with 4cm gauge I class brick ballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 )

Concrete with 4cm gauge stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a)

Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement,Chopan coarse sand and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18)

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21)

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23)

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24)

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lighter beams i.e. having span upto 6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.25)

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granitet, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in heavier beams i.e. having span above 6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.26)

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27)

RCC work with cement approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc. from Dalla, Jhansi or other quarries, in proportion 1:1.5:3 in RCC pile caping, gantry walls/column foundations and RCC pedestals., excluding supply of reinforcement and its bending but including its fixing and binding the same with binding wire and including cost of all materials, binding wire, labour and T&P.(CSI No. 5.28)

RCC work with cement approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc. from Dalla, Jhansi or other quarries, in proportion 1:1.5:3 in RCC T beam-slab and column., excluding supply of reinforcement and its bending but including its fixing and binding the same with binding wire and including cost of all materials, binding wire, labour and T&P. (CSI No. 5.29)

First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01)

First class brick work in 1:6 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required & also including honey comb thick works thickness of wall not to be less then 1.5 brick including supply of all materials, labour & T&P etc. required for proper completion of work . (CSI 6.01+6.07)

First class brick work in 1:6 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. including extra labour. ( CSI 6.01+6.07+6.08)

First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.03)

First class brick work in 1:4 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. including extra labour. (CSI 6.03+6.07+6.08)

First class brick work in 1:4 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for half brick (115mm) thickness wall including supply of all materials, labour & T&P etc. required for proper completion of work.including extra labour (CSI 6.03+6.07+6.09)

Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit) (CSI No. 6.23)

S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55)

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60)

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats including Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & T&P etc. required for proper completion of work.(CSI 8.57+8.61)

Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.61)

Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt, 1 no stopper including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.62)

Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63)

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01)

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03)

Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter.(CSI No. 9.07)

Supplying and fixing rolling shutters of approved make made of 80x1.25 mm. Gauge cold rolled M.S. lathes inter locked through out their inner length and joined together at the end by end lock guides & arrangements for inside and outside locking with push &pull operation complete but excluding the cost of top cover and springs. CSI No. 9.08)

P/F 27.5cm. long wire spring grades 2 for rolling shutters. (CSI No. 9.09)

Providing and fixing top cover rolling shutters. (CSI No. 9.10)

Providing & fixing ball bearing for rolling shutters. (CSI No. 9.11)

Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work.(CSI No. 9.12)

Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) .(CSI No. 9.13)

Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work. (CSI No. 9.14)

Fixing and grouting 25 mm & below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only).(CSI No. 9.15)

Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. one part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17)

Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18)

Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. The rate is including cost of all labour, materials etc. as required for proper completion of the work. (CSI No. 9.20)

S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat.(CSI No. 9.22)

S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 M high including fixing to vertical posts, horizontal runners with 10mm dia. 40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (CSI No. 9.23)

Grouting of vertical or inclined post of pale/chain/security fencing in true level, alignment and in plumb or inclination as required, including cost of all labour, materials and T&P required for proper completion of work. ( Post and concrete for grouting shall be measured separately) (CSI No. 9.28)

Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . (CSI No. 9.30)

Fixing of template in position level and alignment for grouting of Anchor bolt in auxiliary foundation. (labour rate only).(CSI No. 9.32)

Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only).(CSI No. 9.33)

Providing & fixing 1 mm.thick M.S. sheet garrage door with frame of 40x40x6mm angle iron, diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at the junctions and corners including supply and fixing of necessary fitting, 2 no lock rail of 16 dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete.(CSI No. 9.34)

6 mm thick Chequered plate trench covers with 40 x 40 x 5 angle support on two sides across the trench section and 12mm dia rectangular reinforcement hook complete with all labour, materials, welding and cutting etc including all T&P required. (CSI No 9.41 )

Supply and fixing 50 mm dia 150 mm long G.I. pipe in chhajja as spout including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.10)

12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.07)

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09)

Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.12)

2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm.floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work. (CSI No.11.13)

S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15)

Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work.(CSI No. 11.16)

6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work. (CSI No. 11.17)

Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (CSI No.11.18)

Making drip course (25x12) mm in 1:2 cement and coarse sand including supply of all materials, labour and T&P etc required for proper completion of work.(CSI No. 11.19)

3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20)

First class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work. (CSI No. 12.07)

Straight over burnt bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work.(CSI No. 12.09)

Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, , laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 12.11)

Supply and Laying 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12)

Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.13)

Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.14)

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18)

Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20)

S/F 10mm thick Group 25 acid resisting tiles of “Somany” or equivalent approved make in flooring or skirting (confirming to I.S. 4457 - 1967) in ordinary Portland cement and coarse sand in ratio 1:3 with the joints filled with acid resistant cement “Accocide” of A.C.C. or equivalent make acid resistant cement and liquid supplied with cement, mixed in 1:3 ratio to make a workable paste in G.I. Tray. The joints should be kept as 5mm and to be cured for 7 days with dilute HCL (One part acid and three parts of water). Rate should be including the cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 12.22)

Supply of 80 mm thick I shaped mechanically compressed rubber mould inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.24)

2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.without base PCC. (CSI No. 12.26)

4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.without base PCC. (CSI No. 12.28)

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01)

Every Coat after first coat with approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.02)

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.(CSI No. 13.20)

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)

Every coat after first coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.23)

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra).(CSI No. 13.25)

Every coat after first coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra)..(CSI 13.26).

Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position.(CSI No. 13.28)

White washing three coat including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.03)

Laying cement concrete road slab consisting of 1 part cement 1.5 part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape,finishing with TRIMIX machine ,concrete hardner and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.13)

Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 18.14)

Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work. (CSI No. 18.16)

300 mm dia RCC pipe (CSI No. 18.16 b)

600 mm dia RCC pipe (CSI No. 18.16 c)

900 mm dia RCC pipe (CSI No. 18.16 d)

Construction of granular sub-base (GSB) by providing well graded Material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per the direction of Engineer In Charge. (Taking Output -300 Cum ) (CSI No. 18.17)

Developing the tubewell by the air compressor having a capacity of 8.5 CuM or by the borehole pumping set having the capacity of 0.7 CuM/sec as per direction of Engineer I/C. (CSI No. 19.01)

Development of tubewell by O.P. Unit (5 HP to 10 HP submersible pump set), including bringing Column pipe for the OP unit, assembling, electric connections, running for required period, dismentling and taking out & carrying away and cleaning the site with cost of all labour, materials, T&P and fuel / Electricity Charges etc required for proper completion of work and as per direction of Engineer-in-charge. (CSI No. 19.14)

S/F 40 mm. dia G.I.("B" class) column pipe of JTC/Jindal or approved make with column coupling in random length of 3 Meters (2.50 - 2.90 MT ). (CSI 19.22c)

Supply and stacking pee gravel properly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work. (CSI No. 19.25)

Supply and installation of 5H.P. Kirloskar or equivalent make single stage, horizontal, self priming,three phase dewatering pumpset of specification Head 14/16 M, Discharge 13.6/10 LPS, solid handle size 15.5 mm, suction 80 mm, delivery 80 mm, RPM 1500 including cost of 80 mm dia G.I. pipe for suction (3M) and delivery (4.5 M). (CSI No. 19.29)

Supply & installation of electrical control panel of L&T or Havells or equivalent make for 2.00 H.P single phase submersible pumpset/ pumpset containing contractor relay condenser.(CSI No.19.31 b)

Supply & installation of electrical control panel of L&T or Havells or equivalent make for submersible pumpset/ pumpset containing contractor relay condenser for 5 H.P pump set three phase(CSI 19.31d)

Supply & Installation of submersible pump single phase 2.00 HP outlet 40 mm dia. or more, Head 89/45, Discharge 2000/6000 LPH of K.S.B. or eqt. make including cost of labour, T&P and material required for completion of work, with one year of warranty.(CSI No.19.32 c )

S/F submersible pump cable size 2.5 sq.mm for pump set above 1HP and upto 3.00 H.P. (CSI 19.33 b)

Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)

Supply and stacking of compost manure at site including carriage upto 3 km (Manure measured in stacks will be reduced by 8% for payment). (CSI No. 23.04)

Supply and stacking of local sand at site including charges of royalty and carriage of the same at site including all leads after 8 kms. (CSI No. 23.05)

Mixing earth sand and manure in proportion specified or directed by the engineer I/C. (CSI No. 23.06)

Spreading of manure sand and good earth mixed in required proportion ( cost of manure, good earth & sand to be paid separately ) (CSI No. 23.07)

Supply and plantation of approved 2 years old plants duly planted in earthen Gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportion including cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. (CSI No. 23.08)

Supply and plantation of approved 2 years old plants duly planted in mosaic gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportion including cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work.(CSI No. 23.09)

Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. (CSI No. 23.10)

Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed.(CSI No. 23.11)

Supply and planting Ashoka, Pendula, Mango, Neem,Peepal, Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(CSI No. 23.12)

Supply and planting Desi Doob grass in lawn including cost of Doob, fertilizer, manure,labour, T&P and preparation of bed complete in all respects. (CSI No. 23.13)

Hedge plantation in a row distance between two hedge 15 to 25 cm including digging hole 6” to 12” ,manure and treatment with proper chemical etc., including cost of all materials,labour and T&P etc complete in all respects. (CSI No. 23.16)

Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.(CSI No. 26.01a)

Providing and fixing 20 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete .(CSI 26.01b)

Providing and fixing 25 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.(CSI 26.01c)

Providing and fixing 32 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete(CSI 26.01d)

Providing and fixing 40 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete(CSI 26.01e)

Providing and fixing 50 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete (CSI 26.01f)

Providing and fixing 65 mm dia B-class Jindal, JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete(CSI 26.01g)

Making water connection of GI pipe line with GI Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 26.03)

Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05a)

Providing & fixing half turn 20 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. .(CSI 26.05b)

Providing & fixing half turn 25 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI 26.05c)

Providing & fixing half turn 32 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI 26.05d)

Providing & fixing half turn 40 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI 26.05e)

Providing & fixing half turn 50 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI 26.05f)

Providing & fixing half turn 65 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. .(CSI 26.05g)

Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09a)

Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12)

P/F BRASS BIB COCK, 15 mm dia (400 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13a)

Providing and fixing CP BRASS bib cock 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a)

Providing and fixing CP BRASS stop cock 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16c)

Providing and fixing CP BRASS shower 15 mm dia. HEAVY QUALITY ( > 225gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16e)

Providing and fixing CP BRASS angle valve 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i)

Providing and fixing CP BRASS piller cock 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j)

Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17)

Providing and fixing of 200 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.24)

Providing and fixing first quality white glazed orissa pattern W.C. Pan Hindustan,cera make of size (58 x 44cm.), including P/F white glazed P or S trap 100 mm dia including supply of all materials,labour and T&P etc.complete. (CSI 27.01+27.23)

Supply and fixing first quality white glazed earthern ware European type." Pan Hindustan or equivalent make of size (58 x 44cm.), including ,cover,P/F white glazed P or S trap 100 mm dia including supply of all materials,labour and T&P etc.complete. (CSI 27.02+27.04)

Providing and fixing flat back 430X370X340 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI 27.06)

Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 27.08)

Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12)

Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14)

Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15)

Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16)

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19)

Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21a)

Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26)

Providing and fixing CI COVER WITH FRAME COMPLETE 450 mm INTERNAL Dia. including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.27)

Providing and laying 110 mm SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.(CSI 27.29c)

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.(CSI 27.30c)

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work.(CSI 27.32c)

S/F full way 63/65 mm dia Fire hydrant Gun Metal Gate Valve heavy quality including supply of all labour , material andT & P for proper completion of work . (CSI No. 28.03)

P/F Male & Female coupling 63/65 mm dia. Gun metal BSI marked confirming to IS:903 heavy quality including supply of all labour , material and T & P for proper completion of work (CSI No. 28.04)

P/F Short Branch pipe Gun Metal BSI marked heavy quality including supply of all labour , material and T & P for proper completion of work. (CSI No.28.05)

P/F 63 mm dia RLL Hose Pipe heavy quality having length 15.0 m including supply of all labour , material andT & P for proper completion of work. (CSI No. 28.06)

P/F MS Hose Box Single Door with stand for 15 mt RRL Hose heavy quality including supply of all labour , material andT & P for proper completion of work. (CSI No. 28.07)

Placing of 10 KL PVC Tank over slab of 6 m staging including supply of all labour , material andT & P for proper completion of work.(CSI No.28.08)

Supply and installation of INDIA MARK HAND PUMP II including 150 mm dia ,70m deep boring up to second starta including supply and lowering 110mm to 63mm dia PVC pipe( 24m-110mm & 44m , 63mm,6 kg/sq.m) with required strainer,reducer joining 90 mm dia long cylinder,32mm dia GI pipe 3mlong including supply and filling of coarse sand of approved quality (approx. .15 cum) including developing the bore well to achieve clear and sand free water for continous 60 min. including cost of all material, labour and T&P and its cartage for installation of hand pump complete as per drawing including construction of 1.85 m dia chabutara with excavation of earth and laying 25mm C.C. floor 1:2:4 with cement, c.sand and 20mm stone ballast with water proofing compound over 100 mm thick c.c. 1:6:12 with cement, c.sand and 40 mm brick ballast and making side edge 115mm thick and 300 mm deep with brick work 1:4 and plaster the same with 1:4 mix with neat cement finish also including 115 mm wide drain in 1:4 brick work & plaster all around the periphery of plateform complete including supply of all materials,labour and T&P etc required for proper completion of work.(CSI No.28.10)

Contouring of sub-station with help of leveling instrument/ total station instrument & staff including plotting of trees and structure if any including preparation of contour plan in 6 copies including marking periphery including all labour, Supervisor, instrument, T&P materials complete as per direction of Engineer I/C.(CSI No.28.11)

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (CSI No.28.19)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (CSI No.28.21)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness:.(CSI No.28.23)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge including the cost of all fittings. (Glazing, paneling to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) :(CSI No.28.24)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of all fittings, EPDM rubber / neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron).(CSI No.28.25)

Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet.(CSI No. 28.30)

Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACP of 4.0 mm thickness (CSI No. 28.31)

Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38)

Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,131C+187A)

Wiring point for fan/fresh air fan with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,133C+187A)

Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,134C+187C)

Wiring point for exhaust fan. with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,137C+187D)

Supply and fixing and concealing of 20 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,148A)

Supply and fixing and concealing of 25 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work(PWD ELE. SCH.2018,149A)

Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 20mm dia 16 guage (1.5mm) thick conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,154)

Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 16 guage (1.5mm) thick rigid steel conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work. (PWD ELE. SCH.2018,155)

Supply and wiring of submains with 2 nos. 2.5 sq.mm & with 1 no earth wire of 1.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,291)

Supply and wiring of submains with 2 nos. 4 sq.mm & with 1 no earth wire of 2.5 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,291A)

Supply and wiring of submains with 2 nos. 6 sq.mm & with 1 no earth wire of 4 sq.mm FR PVC insulated 1100V grade insulated multistrand single core copper conductor cable in existing PVC conduit pipe complete,including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,291D)

Supply and fixing of 32 Amp.240 V DP metal clad rewireable type switch fuse unit on MDFEG/Teak wood board including making connections etc.complete all respect.(PWD ELE. SCH.2018,305 CAT-B)

Supply and fixing of 63 Amp.415 V metal clad T.P rewireable type switch fuse unit on angle iron bracket including making connections etc.complete all respect.(PWD ELE. SCH.2018,313 CAT-B)

Supply and burying of 600 x 600 x 3 mm copper plate vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 S.W.G. copper wire in 15 mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. Pipe and copper wire will be extra) 30 cm sq. C.I. frame with hinged cover masonary housing alternate layer of charcoal /coke & salt at least 150 mm thick alround etc.complete in all respects.(PWD ELE. SCH.2018,704)

S/F of one number 8 SWG G.I. wire in 15mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand,labour,T&P and other materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,721)

Supply and fixing of 0.5 to 5.0 Amp. SP MCB (10 KA ) C Curve of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1001 CAT -B)

S/F of 6/10/16/20/25/32 Amp. SP MCB (10 KA ) C Curve of approved make and as per sample approved by E/I (PWD ELE. SCH.2018,1002 CAT-B)

Supply and fixing of 40 Amp. SP MCB (10 KA ) C Curve of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1003A CAT-B)

S/F surface/flush mounting 4 ways SPN distribution board without MCB with additional metal door complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1022 CAT-B)

S/F surface/flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1026 A CAT-B)

Supply and fixing of power plug with 20 amp/250 volt flush type modular switch and 5pin 20A/250V flush type universal modular socket switch on concealed M.S.Box including suplly of all materials ,labour T&P etc. required for proper completion of work (PWD Elec.Sch.2018 Item No.1139 A)

S/F hexagonal/round G.P. fan box of approved make made up of 1.0 mm thick ISI marked G.P. sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box.Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coated M.S. bar X 12 MM & brand name should be embossed. Fixing with wiring conduit laid in RCC roof before concreting alongwith supply of all materials labour and T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,1149)

Supply and Fixing of G.P. Modular switch box for 1/2 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152A)

Supply and Fixing of G.P. Modular switch box for 3 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152B)

Supply and Fixing of G.P. Modular switch box for 4 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152C)

Supply and Fixing of G.P. Modular switch box for 6 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,1152D)

Supply and Fixing of G.P. Modular switch box for 8 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,1152E)

Supply and Fixing of G.P. Modular switch box for 12 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,1152F)

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.. (PWD ELE. SCH.2018,1403 CAT-A)

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect... (PWD ELE. SCH.2018,1413A CAT-A)

Supply and fixing of 36 watt to 46 watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. (PWD ELE. SCH.2018,1406)CAT-AAA

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.(CSI No. 15.01)

Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03)

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)

Dismantling of existing R.C.C. Gantry/ Auxiliary foundation with the help of mechanical means in switchyard including disposal of refuse/ debris as per direction of Engineer - in - charge. Including all labour and T&P etc. required for proper completion of the work. (CSI No. 15.15)

Arranging JCV machine as per direction of Engineer - in - charge. Including all labour,fuel and T&P etc. required for proper completion of the work.(Material item no 21 h ch 2)

Arranging and laying 40 mm uniform stone ballast . (Material item no 2e ch 2)

Arranging and laying 20 mm uniform stone ballast . (Material item no 2d ch 2)

Arranging and laying 6 mm uniform stone ballast. (Material item no 2b ch 2)

RAKESH KUMAR SHARMA