Spl repair to CK house and dining hall Bldg No P 13 B and P 14 A at KLP loc of M Med Regt at Faridkot Mil Stn

Amount

Taking down chowkhats incl shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each complete all as specified and directed

Taking down chowkhats incl shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for coloured dark shade non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18sqm & shall be of premium quality (B-IIA Grade) confirming to IS-13712, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for 10mm thick backing coat in CM 1:3 on brick or concrete surfaces for fixing of wall tiles as in dado/skirting complete all as specified and directed.

M&L for glazed, coloured (including designer tiles as approved by GE) ceramic tiles in vertical surface of size 300 x 450 x 7 to 8mm thick set and joined in neat cement slurry and pointed in cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for Anodised aluminium snap grid frame work for false ceiling all as specified hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified perforated particle board/tiles 12mm thick for insulation and acoustic purposes, 60x60 cm in size, fixed frame work or with staples on snap grid all as specified and directed by Engg-in-charge

S&F hollow PVC wall lining interlocking type 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawal plug and steel screws including fillets on joints as per manufacturers instruction etc complete all as specified and directed by Engineer-in Charge. Note:- If any minor electric fittings and fixtures disturbed there will be match and fixed as existing.

Dismantling water tanks and removing to store of capacity 1000 ltr complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoised and fixed in position all as specified in SSR Part I of capacity 1000 ltrs complete all as specified and directed

M&L for Aluminium Powder coating section for door/ window/ Ventilators/ partition etc frames & shutters including joining cleat, mullion, grills etc. sliding/ openable type complete of standard sections all as specified and as directed by E-in-Charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco)

S&F stainless steel wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge

S&F 4mm thick plain glass, pin head type and glazing in squares in exc 0.5 Sqm in each pane all as specified and directed

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube wood grain printed PVC sheet used instead of plain colour sheet and edges will be printed to match with printed sheet all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Prelam/plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified

S&F 35mm thick 2nd class hard wood plain framed panel shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed by Engr-in -Charge

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified

S&F 150mm long Aluminium anodised handles cast type complete all as specified

S&F MS butt hinges 100 mm long, medium weight, cold rolled complete all as specified

S&F Aluminium anodised barrel tower bolt, 150 mm of extruded complete all as specified

S&F 140 mm size, floor door stopper of aluminium alloy body and tongue with hard drawn spring complete all as specified

S&F Aluminium Door closer hydraulically regulated extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified

Dismantling of existing any type of floor tiles, stone slab laid and bedded, pointed in any mortar, picking, sweeping clean and washing down with water to remove dust, etc complete, as specified

M&L for 18-20mm green marble as in flooring, staircase for treads including and over backing coat 15mm thick cement mortar 1:4 including pointing with wite cement using marble dust (1:2) with admixture of pigment to match with the shade of granite including semi-circular nosing and all as directed and as specified by Engineer In Charge

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified

Demolition of Brickwork or stone/boulder masonry complete all as specified

M&L for Brick work with fly ash straight of curved on plan exceeding 6 m mean radius built in modular bricks in cement mortar 1:6 complete all as specified.

Taking down cement plaster on brick / concrete / stone surface including raking out joints, hacking for key scrubbing down with water etc. complete all as specified

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling finished even & smooth without using extra cement complete all as specified

M&L for 15mm thick rendering on brick work/block masonry in CM(1:4) in two layers 10 mm thick in first layers and 5 mm thick in second layers with water proofing compound finished even and smooth without using extra cement complete all as specified. (NOTE :- Water proofing compound shall be paid and measured separately)

M&L for 15mm thick rendering on brick work/block masonry in CM(1:6) finished even and smooth without using extra cement complete all as specified

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified & directed by Engr-in-Charge. (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for preparation of new plastered surfaces of walls including 3mm wall putty and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified

M&L for preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-in-Charge.

M&L for complete removal of existing treatment and applying two coats of cement base paint complete all as specified & directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed.

M&L for cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in roof including levelling to achieve specific slope and smooth finish, including necessary form work complete All as specified and directed by Engr-in-Charge

M&L for Roof Treatment as specified below and as directed : (a) Cleaning, washing of surface and removing all existing bitumen coatings completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease. (b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (d) Laying polyster reinforced fibre net/50 gsm Geotextile mesh, upto 300 mm on side walls/parapet walls. (e) Applying three coat of HydroShield PUD micro-fibre reinforced UV resistant polyurethane (solid content 68%) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per Sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300mm on walls. (f) Complete treatment to be carried out by authorised applicator of Water proofing manufacturer. Make : Dr. Fixit/ Asian/STP. Note :- (i) The treatment shall be carried out as per manufacturers instructions and as directed by Engr-in-Charge. (ii) The plan area of floor shall be considered for payment. (iii) WPC shall be paid separately.

S&F 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs complete all as specified and directed

S&F in repairs Bib taps, long shank, fancy type, 15mm bore of pipe, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 15mm CP fancy type stop valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Wash hand basin, Vitreous China oval shaped, first quality, ivory colour, of size 550mm x 400mm x 175mm, including cutting for and pinning in ends of brackets or erecting stand, with and including CI brackets, PVC flexible pipe with both side brass nuts to joint and 750mm long PVC waste pipe 32mm dia, CP waste coupling with long screwed shanks and fly nuts, fixed in repairs, complete all as specified and directed.

Supply only 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms, suitable for vitreous china wash basin complete all as specified

S&F 10Litres capacity flushing cistern PVC valve-less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified

S&F Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) add fixed in repairs including pan seat cover complete all as specified

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified

S&F 15mm dia bore GI tubing medium grade, galvanised with all fittings and fixed complete to walls and ceilings or laid in floor etc complete all as specified and directed.

S&F 'P' or 'S' trap in 100 mm dia pipe complete all as specified

S/F in repairs Towel Rail 600mm long 20 mm dia brass chromium plated fixed with and including Chromium plated brass screws and wooden/ plastic cleats. (Minimum weight 190 gms) complete all as specified and directed.

Supply only integral liquid WPC of approved make complete all as specified

M&L for Scraping loosened/ cracked concrete of RCC structure at any location by chiselling etc including removal of debris away from n.exc 500 mtr site all as specified and as directed.

S&F hard down steel wire fabric not exceeding 4 kg/sqm cut to lengths, bent to shape mild steel wire, (annealed) not less than 0.9mm dia as in reinforcement as directed by Engineer-in-Charge.

M&L for reinforced deformed TMT bars 10mm dia and over cut to length cranking bending spirally or hopping ends MS wire annealed not less than 0.9mm dia complete all as specified

All as per Srl Item No. 64.00 here-in-before but 8mm dia and above bars as stirrups in columns.

M&L for Shotcreting R.C.C. columns, beams and slabs etc. with 25mm thick in Grade M 25 with cement content not less than 330 kg per cum in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary Portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of cantering and shuttering at edges and corners etc. as directed by Engineer-in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified

Demolition of RCC of any description such chajja, shelves, water staging roof etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified

M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified

M&L for Use and waste of form work through finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified

M&L for machine cut kota stone slab in flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified and directed by Engr-in-Charge

Demolition of concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified

M&L for cement concrete 50mm thick type C2, 1:3:6 using 20mm graded aggregate as in plinth protection/path finishing surfaces even and fair (without using extra cement) complete all as specified

S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.2 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge

S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.2 mm thick cut to size, holes punched and welded seams including bending or turning up all around, metered angle, one No of locking arrangement two Nos Handle etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engr-in-charge Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed by Engr-in-Charge.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/ceiling surface in PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 1.6mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc covered with 3 mm thick plastic laminated Hylem top cover sheet of required colour fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for one light point/ Fan point/ Exhaust point controlled by one way switch all as specified and directed by Engr-in-Charge.

All as per Srl Item No. 77.00 here-in-before but one three pin socket out let 5 amps on the same board with other switches

All as per Srl Item No. 77.00 here-in-before but one 3 pin, 5A switch socket outlet point on independent board

All as per Srl Item No. 77.00 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.

S&F PVC Lamp holder suitable for LED 5 to 20 watt blub complete all as specified and directed.

S&F LED bulb 1x10 Watt lamp having luminous efficacy warranty 2 year all as per specification & directed

S&F LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge.

M&L for ceiling rose 3 terminal / PVC / polycarbonate isolated body complete all as specified and directed.

M&L for wiring for circuit/ submain wiring with two single core PVC FRLS insulated copper conductor 6 Sqmm and same 6 Sqmm for continuous earth wire drawn in to concealed PVC conduit and including making good disturbed surfaces of walls as necessary complete all as specified and directed by Engr-in-Charge. Note: Cost of earth wire including in sub main wiring.

S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F socket two in one 5/6 Pin, 5/6 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed.

S&F socket two in one 5/6 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure for DB's SPN 230 volts 12 way double door ncluding taking down unserviceable old DB any type, MCB etc and making good disturbed surfaces of walls as necessity complete all as specified and directed by Engr-in-Charge

S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed .

S&F in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body IP-65 rating with minimum 100lm/watt heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver, including 32 mm GI bracket and clamp and electric connection, complete fitting with all accessories complete all as specified and directed.

S&F in repair of fan regulator suitable for ceiling fan complete all as specified and directed

Supply, fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermo-state, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge

S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 450 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- A Sum of Rs. 37,775.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 29 (Schedule of credit) of Tender Documents.

Vinod Kumar Bajaj (BID ID -3203049)

NAV DURGA CONSTRUCTION CO (BID ID -3203736)

SHIV SHAKTI BUILDERS (BID ID -3203341)

msgurjantconstructioncompany (BID ID -3203359)

M/S BSS AND SONS (BID ID -3203883)

M/S RAJESH KUMAR and CO. (BID ID -3203907)

DEEPAK ENTERPRISES (BID ID -3203378)