SPECIAL REPAIR TO ROOF OF BLDG NO P 590 AND OTHER SANCTIONED WORKS AT CHANDIMANDIR

Amount

Supply and fixing factory made aluminum frame for door openings windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing and aluminum hardware shall be measured and paid separately)

Supply and fixing 5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note :Cost of Anodized aluminum bead, rubber packing, aluminum screws etc, are included in this item

Taking down complete aluminum frame, partitions with glass / boards any types etc of any size and repairing the same by replacing of damages parts, oiling, greasing ad re-fixing back and making good the disturbed un-serviceable parts and making smooth operation complete all as specified and directed. NOTE : Any parts changed will be measured and paid separately

Material and labour for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars 8mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Material and labour for form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.

Material and labour for reinforced cement concrete , 1:1½:3 (nominal mix,type A-1, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour 12mm thick baroda green marble stone slabs, (minimum size 90cm x 90cm), width and length as ordered, best quality machine cut and granite polished to be fixed on flooring etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab over and including screed bed 10mm thick in cement mortar 1:4 complete including rubbing and granite polishing, complete all as specified and directed.

Supply and fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Material and labour for glazed ceramic coloured tiles of size 300mmx450mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Material and labour for nahani trap 100mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking up or down steel tubing and connections 25mm bore from walls, floors, trenches etc complete all as specified and directed (cutting chases and making good shall be measured and paid separately).

Taking up or down steel tubing and connections 20mm bore from walls, floors, trenches etc complete all as specified and directed (cutting chases and making good shall be measured and paid separately).

Taking up or down steel tubing and connections 15mm bore from walls, floors, trenches etc complete all as specified and directed (cutting chases and making good shall be measured and paid separately).

Supply and fixing for 25mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 complete all as specified and directed.

All as per item No. 17 hereinbefore but fixing only (old serviceable tubings to be reused) –ditto-

Supply and fixing for mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall, ceilign, laid in trenches complete, all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.

Fixing only for 20mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 complete all as specified and directed.

Supply and fixing for concealed mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches complete all as specified and directed.

Fixing only for 15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 complete all as specified and directed.

Supply and fixing bib taps, 15mm bore,fancy type with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified and directed.

Supply and fixing bib taps, 15mm bore, long body, fancy type with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified and directed.

Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding half brick but n.exc full brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.

Material and labour for 15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair complete all as specified and directed

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge

Material and labour for 15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and smooth (upto 12mtr height) complete all as specified and directed

Material and labour for preparation of new undecorated plastered surfaces of walls including cornices , pilaster etc) and applying two coats of distempering oil emulsion complete all as specified & directed by Engineer-in-charge.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, except bricks complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Supply and fixing 18/19mm thick block boards (ISI Marked), grade 1 best quality,exterior grade, commercial type, decorative face veneer on both faces, fixed with screws to timber frame-work as in cabinet box including PVC/wooden leeping /Strip fixed with SR adhesive on exposed surfaces, complete all as specified & directed.

Supply and fixing for continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps (when open) 30mm, all as specified.

Material and labour for 150mm aluminum anodized barrel tower bolts (ISI Marked) of extruded section, complete all as specified and directed

Supply and fixing for 150 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Roughening surface of old concrete floor by picking, seeping clean and washing down with water to remove dust etc incuding brushing neat cement slurry with 3.0kg of cement per Sqm, complete all as specified and directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Material and labour for 40mm thick brick tiles are bedded mud mortar and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement on concrete surfaces complete all as specified and directed.

All as per item No. 41 hereinbefore but except tiles–ditto-

Material and labour for plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.

Dismantling water tanks of capacity exceeding 500 litres n exc 1000 litres and removing to store complete, all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as specified and directed.

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) bends any radius, fixeed as in repair complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, fixed as in repair complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal fixed as in repair complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge.

Supply and fixing poly carbonate coloured sheets as approved, 6mm thick as in roofs as in dome shape, circular / semi circular / arch type shape upto 12 mtr height including self tapping screws / form work / scafolding if required at site to complete the work including adequate size steel screws, washers, nuts, fubber strips/ rubber beading, silicon etc to fill up exisig holeds etc aluminium strip/ flat etc as per manufacturer’s instructions, complete all as specified and directed. Make of sheet shall be GE POLYCARBONATE/TUFF LIGHT.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 with one shop coat of zinc chromate primer paint complete all as specified & directed by Engineer-in-charge.

Supply and fixing for mild steel flats as in wind ties, plate washers and silmilar small articles confirming to Fe-290 Gde- E-165 complete all as specified & directed by Engineer-in-charge.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all specified and directed.

Supply and fixing for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, fixed in repairs in patches n exc 5 sq. m each, all as specified and directed.

Dubbing out average 15mm thick in cement mortar 1:4 on irregular face of walls, exposed reinforced cement concrete surfaces complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 450mm, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4, nominal mix, type B-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately

Material and labour for form work to, chullah hoods, chajjas, troughs and similar items including edges and similar items including edges for fair finished surface of concrete flat complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge.

Material and labour for 5mm thick rendering plaster in Cement and Sand mortar 1:3 over brick work or concrete surfaces , finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position upto 10 meter height, including taking down old cement plaster and including necessary scaffolding complete all as specified & directed.

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for three coats of white wash on plastered or unplastered ceilng surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for three coats of white wash on plastered or unplastered wall surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for rendering 20mm thick plaster in cement mortar 1:4 mixed with WPC on fair faces of brick wall or on concrete surfaces or on roof and finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

Supply only Integral waterproofing compound, all as specified.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Supply and fixing 80mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of, M-40 grade, joints filled with sand complete all as specified and directed

Material and labour for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

Supply and fixing for 600mm x 600mm x 250mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.

Excavating in post holes (or similar holes) in hard and dense soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 Mtr and making good surface complete all as specified & directed by Engineer-in-charge.

Material and labour for plain cement concrete 1:3:6, nominal mix, type C-2 ,using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard and dense soil,l all as specified & directed by Engineer-in-charge.

Material and labour for Hard core of broken stone or boulders of gauge of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains etc like including necessary forms/ moulds complete all as specified & directed by Engineer-in-charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in repair 500ltrs capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fixing in repair 1000ltrs capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Disconnecting existing tanks exc 250 and n.exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specifie

Disconnecting existing tanks exc 500 and n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified & directed by Engineer-in-charge.

Supply and fixing for glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.

Supply and fixing for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

Applying wall care putty on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

Material and labour for preparation of old plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls , applying one coat of weather proof exterior acrylic emulsion (100% Acrylic) paint complete all as specified and directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls , applying two coats of weather proof exterior acrylic emulsion (100% Acrylic) paint complete all as specified and directed.

Material and labour for treating the surfaces by applying two coats of acrylic polymer odified ready to use cementttious coating (Sikatopseal 107) complete all as specified as per manufacturer's instruction.

Material and labour for ready mixed concrete (low density thermalinsulative concrete of density 1200 kg/Cum) 1:2:4 type B-1 obtained from plant listed with MES as in roofs, terraces, sunken, and in other location as per site requirement laid all as per manufacturer direction complete all as specified and directed.

Supply and fixing powder coated (thickness or powder coating of any colour coating not less than 50 micorn) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as required and directed by Engineer-in-Charge.

Material and labour for 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site, fixed as in repair complete all as specified and directed.

Material and labour for 15mm thick cement plaster in cement mortar 1:4 on RCC surfaces / brick surfaces of walls / ceiling of RCC facia, RCC parapet wall, cornices, ceiling etc exc 6 mtr height and n.exc 12 mtr height including necessary form work / scaffolding as required and two coat of cement base paint over a coat of primer, including taking down cement plaster complete all as specified and directed

Material and labour for Perforated particle boards or tiles 12mm thick for insulation and accoustic purposes, 60cm x 60cm size on and including standard aluminium snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.

Material and labour for Hasp and staple, 125mm size, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws compelte all as specified and directed.

Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding half brick but n.exc full brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material n.exc 1.5 km complete all as specified and directed.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6/16 Amp, independent board , complete all as specified and directed. Note : Unit rate is inclusive of cutting chases wall / floor/ PCC or making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amps complete all as specified & directed.

Supply and fixing socket outlet 2/3 pin, 5/15 Amp piano flush type complete all as specified & directed.

Supply and fixing MCB, single pole, 6 to 32 Amp, 240 Volts, having breaking capacity 10 KA, complete all as specified & directed.

Supply and fixing exhaust fan 380mm sweep, 240 volt, 50 Hz, PVC body with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable upto ceiling rose complete all as specified and directed.

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fixing wall mounted fan 450mm sweep, 240 volt, 50 Hz, PVC body with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed.

Supply and fixing Non return valve (brass) 15mm bore size fixing in inlet waster pipe of geyser complete all as specified and directed

Supply and fixing electric water storage heater (vertical type geyser) 25 ltr 230 volts AC single phase with and including stainless steel tank, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt etc as per site requirement, making necessary inlet / outlet water connection and electric connection, testing on load for full satisfaction of Engineer-in-Charge

Standard Const. Co.

Gunjan and Gunjan Associates

PARVEEN KUMAR AND SONS

M/S Hari Om Construction