WBPHED/EE/AMD/ NIeT-24 of 2026-2027/2

Supply and delivery of 300 mm dia Full Bore Electro-magnetic Flowmeter:-Protection: IP68 (Minimum inbuilt-20 meter cable), factory potted), Full bore type Electro Magnetic Flow meter With Smart Transmitter (Volume Flow rate output: 4-20mA HART Output and Totalizer Pulse Output: 0.05cu.m /Pulse) With LCD 4 line backlit Display and configuration through Bluetooth, Calibration lab as per ISO 17025 , Accuracy: 0.5% , +/- 2mm/sec, Inbuilt Measuring, Reference, grounding & Empty Pipe Detection Electrode with Polyurethane/Hard Rubber Liner,Supply: 24V DC or 230VAC. Process Connection: CS flange PN10/PN16. (Make:-Endress + Hauser/Yokogawa/Other approved make)

Supply delivery and storage at site of Radar type continuous level measuring unit with following specification:- Non-hazardous area Power Supply; Output; Operation: 2-wire; 4-20mA; Bluetooth (App) configuration Antenna; Max. Measuring Range: 40mm/1-1/2"; 8m liquid -40...60oC/-40...140oF Process Connection Rear Side; Material: Thread G1 ISO228; PVDF Process Connection Front Side; Material: Thread ISO228 G1-1/2; PVDF Cable Length:-20m The instrument will be supplied with wired Meter Protection Box, consisting of Over Voltage Protection, 24 V DC Power Supply and Relay control panel with 4 relay and Indicator.(Make:-Endress+Houser/Yokogawa/Other approved make)

Automatic Servo Voltage Stabilizer (1KVA) for each flow meter, Latest Digital Display and Microprocessor Controlled, Copper variacs that are very long lasting & Durable, Low voltage, high voltage cut out with automatic timer, system inbuiltOutput voltage accuracy of 1% tolerance and choice of 230V (for single phase) Efficiency of over 98%, high precision output and 24 hours duty capable.Maintenance free, High speed of voltage correction up to 60 volts/ second,Option of air cooled Stabilizer.

Supply of 300 mm dia Slip-on-flange as per IS:1538, 24 mm thick.

Installation of above Radar type continuous level measuring unit at CWR and flowmeter in delivery line, cutting MS pipe, then flange welded, then fixed it, Display should be placed in panel room whole work should be done by expert electrician also guidance of EIC, by using necessary elctro-mchanical accessories & other requisite materials and mending good damages to building works. This including the cost for making necy. connections with power, control, sensing wire and earth continuity wire etc including supplying sockets, soldering materials, tapes etc. and making connection with switch to complete the job satisfactorly including testing all complete.

Construction of different dia Sluice valve/Air valve/Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified]-300 mm dia Flowmeter.

Add GST @ 18%

Add CESS @ 1%