REPAIR MAINT OF RUNWAY, TAXI TRACK AND HELIPAD IN TECHNICAL AREA INCLUDING MAINT OF SHOULDERS AND SIDE DRAIN AT MANASBAL UNDER GE 970 EWS

Amount

M&L for preparing bituminous surfaces of road and marking paint of approved colour confirming to BS 3262-1989 pattern of specified broken/ continous strip 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on top surfaces of runway including cleaning/ removing of existing paint strip from the runway surface make free from dust & moisture and putting in glass beads of standard size by special applicator machine complete all as per manufacturer instructions, applied hot upto 200 to 220 degree centigrade temperature with special applicator machine all as specified and directed by Engr-in-Charge.

Preparing existing concrete/ bituminous painted surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and flakes of old paint etc complete all as specified and directed.

M&L for Painting with two coats of water based paint for making lines, arrow letters etc. On runways and other like surface with "GUIDELINE RM 164 PAINT" Road Marking paint confirming to IS : 164 :1981 specification, white/ Golden Yellow or any other shade with mechanical operated painting system, complete all as specified and as per direction of Engr-in-Charge and accordance with applicable specification.

Material and labour for cleaning the surface with compressed air and make the surface free from dust and other particles and apply cold polymeric bitumen emulstion (PME)@ 1.00 Ltr/Sqm in one coat after dilution with 50% water, viz in the ratio of 1.1 (Water PME) by mechanical spraying machine complete all as specified and directed by Engr-in-Charge. Make: Hincol (M/s Hindustan Coals Ltd), EMULCOT (M/s LN Petro Chemical Pvt Ltd), M/s Shell India Pvt Ltd, M/s Ooms Polymer Modified Bitumen Pvt Ltd, PME as approved by GE. Note: The tenderer shall take into consideration the following points while quoting his rate for the items:- (a) No price ajustment shall be applicable, if excess qty of cold polymeric bitumen emulsion is used under this item. (b) The performance guarantee certificate for two years shall be submitted by the contractor after physical completion of work. (c) The work will be carried out as per the user requirement (as time decided by the users). The deployment of labour and T&P arrangement on the runway shall be intimated to the contractor by 0800hrs each day in the morning. The contractor has to provide necessary arrangement such as light etc and quote the rate accordingly for consideration late working hours at Night. Nothing will pay extra on this account.

Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 10mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engr-in-Charge.

Anodised aluminium frame powder coated (min thickness of power coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. Note : Weight shall be accessed by BOO order by GE to confirm weight in confirming to relevant IS.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m radius built in cement mortar 1:6, complete all as specified and directed by the Engr-in-Charge.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick in cement mortar 1:4 on stone surfaces finished even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation, filling, mass concrete/embedding concrete to posts complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete M-10 (1:3:6), type C-1 (using 20 mm graded stone aggregate) as in pillars and post (including cap and bases), copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel of any description not otherwise provided for drain cover and like complete all as specified and directed by Engineer-in-Charge.

Framed work such as grills, grating etc with ends of bars shoulders and /or riveted or forged into spikes framed guard bars, barred iron doors ladders framed balusters walk ways railing framed work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness ( below or above ground level) complete, all as specified and directed by Engineer-in-Charge.

M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base of floor, complete all as specified and directed

M&L for 100mm thick cement concrete in type B-0 1:2:4 ( 12.5 mm graded aggregate) in sub base of flooring, floors and pavings etc complete all specified and directed

M&L 75mm thick PCC type C2, 1:3:6 using 40mm graded aggregate as in sub base in floor, complete all as specified and directed

M&L for sand cushioning under floors, complete all as specified and directed.

M&L for coloured machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness and M-35 Grade complete all as specified and directed

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new iron surfaces of any description, over 10 cm in width or grith not other wise described complete all as specified and directed.

M/S RAJINDER GOODS TRANSPORT CARRIER

PARVAIZ AHMAD WANI

FG CONSTRUCTION

M/S B A Traders

JK BUILDERS AND ENGINEERS