Annual maintenance and repairs work to Guddadha thuminakatte Lift irrigation scheme in Udugani Hobali Shikaripura Taluk Shimoga

Annual maintainence and repairs work to Guddadha thuminakatte Lift irrigation scheme in Udugani Hobali Shikaripura Taluk Shimoga District

For Side Gland Bush. 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Impeller breezing and making 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

CSR Vol-3 SR 2023-24, P.No.09, I.No.2.4 (201)(i)a, Clearing and grubbing road land including uprooting rank vegetaion , grass, bushes, shrubs, sapling and trees girth up to 300 mm , removal of trees c...

CSR Vol- 2 2023-24, I.No.8.36.1, P.No-47, Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparat...

Removing & refixing the pump after repairing of existing horizontal mounting/ monoblock pump with following spares, etc. including aligning of pump with reference to motor & running the pump on load e...

For Shaft steel welding and making bearing sheet Each, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Shaft threading making Each, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Joint rope of 1Kg, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Pump Shaft bend thrown, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Transpotation, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Pump shaft getting check nut Each, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Both coupling new set, 25 HP to 100 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Pump gear box body radial bearing, 60 HP to 120 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Gear box ball bearing, 60HP to 120 HP complete with lead and lifts as per the direction of the Engineer in charge of work

For Pumping and clean pipe painting, 60 HP to 120 HP complete with lead and lifts as per the direction of the Engineer in charge of work

Removing and refixing the 230/415 v 50 hz I phase/III phase suitable capacity suitable speed horizontal foot mounted screen protected drip proof continous rated monoblock/squrrel cage induction motor ...

Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months , Bearing cost for 80HP, complete with lead and lifts as per the direction of the Engineer in charge of ...

Providing Thrust Bearing as per Specification with guarantee Ball bearing as per ISI specifiction with guarantee period of not less than 12 months , Bearing cost for 80HP, complete with lead and lifts...

Providing terminalplate as per ISI specifiction with guarantee period of not less than 12 months , Terminal plates 7.5 to 12.5, complete with lead and lifts as per the direction of the Engineer in cha...

Supply of Electrician For LIS maintenance

Supply of Watchman For LIS

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Supply of SAE10 oil