Construction of DEICs Audiometry Room Sound Proofing for 7DH, Manipur.

Amount

Construction of Audiometry Room Sound Proofing at JNIMS Hospital, Imphal East, District

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at JNIMS Hospital, Imphal East, District

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at RIMS Hospital, Imphal West, District

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Applying priming coat

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at RIMS Hospital, Imphal West, District

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at Thoubal District Hospital.

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at ThoubalDistrict Hospital.

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at Churachandpr District Hospital.

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at Churachandpur District Hospital.

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at Chandel District Hospital.

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at Chandel District Hospital.

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at Senapati District Hospital.

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at Senapati District Hospital.

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1200 mm sweep

Construction of Audiometry Room Sound Proofing at Ukhrul District Hospital.

DEMOLITION / DISMANTLING

Dismantling doors windows and clerestory windows shutters (wood or steel) including stacking within 50 m lead.

Of area 3 sqm and below

BRICK WORK

Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in

WOOD WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately

Local best quality Uningthou

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws. or cross board and face veneers 3 mm. thick on faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified.

Local best quality Teak wood

35 mm thick.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required Color or shade with nuts and screws etc. complete .

Providing & fixing bright finished brass handles with necessary screws etc. complete.

ALUMINIUM WINDOWS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per tho architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness

M&L for wall Panelling with galvanised iron box panel framework for 24 guage perforated to an extent of 70% and 2'' thick box panels of (8'x1')in dimension. The panels with 4"(100mm)thick box panel should have infill acoustic material density varies from 32kg/cum (glass wool as acoustic material).The material should have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range meet the ANSI standards.The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of 16 guage of U channel approx size(20mm x 55mm x 40mm) and fastenerscomplete.

Ceiling Panelling :- Ditto all as per above item but for Ceiling having mild steel angle framed work (16 gauge mild steel powder coated L angle 50x50 mm in size) to support the ceiling panel

8mm thick underlay of neoprene rubber sheet over which 5mm thick loop pile carpet ,the material attenuates the low frequency waves 125 to 4k Hz and less interference from low frequency sound.

Distempering with dry distemper of approved quality (two or more coats) of required shade on new work i/c priming coat of whiting to give an even shade.

Appplying one coat of water thinnable cement primer of approved quality on wall surface

Water thinnable cement primer

Applying priming coat

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade

Two or more coat on new work

Providing of Internal Electrification Installation at Ukhrul District Hospital.

SUB HEAD-1: WIRING IN PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Group B

Group C

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..

1 or 2 Module (75 mmX75 mm)

8 Module (125 mmX125 mm)

SUB HEAD-II : MCCB, MCB & DB’S

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Providing and fixing following rating RCCB in existing cubical panel board i/c drilling holes in cubical panel making connection etc as reqd

SUB HEAD-III: RISING MAIN AND BUS TRUNKING

Providing and fixing ( following capacity TP & N) disconnector fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board making connections as required.

SUB HEAD V:- NON DSR ITEM (ANALYSED MARKET RATE)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).

1201 mm sweep

M/s G.Thaninjao R.Naga and Sons

Elsalin Kamei