Renovation of Mortuary Building of PHC, Wimberlygunj SW Providing IEI and SITC of 2.0 Ton Split Type Air Conditioner

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group -C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. a) 6 Module (200mm X 75mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying of 12Watt LED Lamp in the existing Batten Holder Similar to C&S Cat No. LTHPLEDLAMP12W / B22 or its equivalent etc., as required.

Supplying of LED Fitting Box Type luminaires equivalent to Crompton Cat No. DMLN1LT8-16 and LED Lamp Retrofit T8 equivalent to Crompton Cat No. LT8- 20-865-2 or its equivalent etc., as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of AC Ceiling Fan (1200 mm) Sweep with socket type electronic regulator etc., as required. Similar to make Crompton Empower 50 - 5 Star (ISI Marked) as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of WEE PLUS LED Bulkhead luminaries Model - BIBWP10W LED with 10 W LED Lamp ideal for efficient solution IP 65 luminaries, Make Bajaj or equivalent to ISI Standard etc as required

Supplying & Fixing of 9W LED Mirror Light fitting with decorative end caps, polycarbonate body and ribbed opal diffuser similar to Havells Cat NO. LHEXARP6PN1W009 or its equivalent etc., as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying of Exhaust fan of 300 mm sweep, 900 RPM similar to Havells Model Turbo force SP or equivalent to ISI Standards

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying, Installation, testing and commissioning of Minimum 2.0 Ton capacity (3 Star) split type wall mounted Air conditioner Make- FORBES HEALTH CONDITIONERS, Series- 3 Star RF10A SERIES - R 32 GAS , Model- GACDFMANCV3240 including cutting, drilling holes on the wall for passing gas pipes, fixing suitable size PVC Pipe on the Wall through the holes and Cementing, Painting to give an even look and smooth finish, wrapping PVC non adhesive white tape over insulation of gas pipe etc., as required and as per the direction of E-in-C or its Equivalent.

Supplying and fixing of 5 KVA Voltage Stabilizer Suitable for 2 Ton Air Conditioner as required of Make V Guard Model VG 500, 15V (Voltage Range 170V- 270V, 12Amps) or equivalent.

Providing and Fixing of Prefabricated stand for keeping outdoor units of 1 Ton / 1.5 Ton / 2 Ton Capacity Split Type AC or its equivalent etc., as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 way , Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 amps

Supplying & Laying of following sizes of XLPE insulated Heavy duty armoured Copper conductor cable of 1.1 KV grade conforming to IS:7098 (Part-I)1988 as applicable Make: CCI/Gloster/Havells/ Polycab/Finolex a) 6 Sqmm x 2 core

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000 mm, outer dia 50 mm, inner dia 25 mm and inner space be filled with crystalline conductive mixture including filling-up with electrodite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required.(Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

M/s G K Construction

ROYAL ENGINEERING WORKS