Supply, Installation, Testing and Commissioning of Medical Gas Pipeline System MGPS Gas Manifold Plant at Police Hospital Jammu

Medical Gas pipe line (MGPS) INSTALLATIONS OXYGEN SYSTEM Supply, Installation, Testing and Commissioning of 2 x 10 Cylinder manifold, complete with automatic Changeover panel with Flow capacity of over 1000-1500 LPM, suitable for 3 source supply, with middle frame, wall brackets & chain for individual cylinder along with non-return valves for every cylinder, required control valves, LED display, etc and allied works ., as per technical specifications provided.

Supply, Installation, Testing and Commissioning of 2 x 3 Emergency Cylinder manifold, complete with manual Changeover and pressure regulator, middle frame, wall brackets & chain for individual cylinder along with non-return valves for every cylinder, required control valves, etc.,and allied works as per technical specifications provided.

Oxygen Flow Meter with humidifier bottle as per given technical specifications.

Oxygen gas outlet points (Imported- CE certified body four digit notified body number) along with probes as per given technical specifications.

NITROUS OXIDE SYSTEM Supply, Installation, Testing and Commissioning of 2 x 2 Cylinder manifold, complete with automatic Changeover panel with Flow capacity of over 500 LPM, suitable for 2 source supply, with middle frame, wall brackets & chain for individual cylinder along with non-return valves for every cylinder, required control valves, LED display, etc. along with allied works, as per technical specifications provided.

Supply, Installation, Testing and Commissioning of 1 + 1 Emergency Cylinder manifold, complete with manual Changeover and pressure regulator, middle frame, wall brackets & chain for individual cylinder along with non-return valves for every cylinder, required control valves, etc.,along with allied works as per technical specifications Provided.

Nitrous Oxide Gas Outlet Points (Imported- CE certified body four digit notified body number) along with probes as per given technical specifications

COMPRESSED AIR SYSTEM FOR MEDICAL AIR AND SURGICAL AIR Providing & fitting of Air Compressors of make Ingersoll Rand/ Anest Iwata/ Chicago Pneumatic/ Kaeser Compressors/ Allen Copel with CFM 35-50 CFM 02 Nos., working pressure-8- 10 bar square, and Air receiver with capacity 1500Ltrs 01 no. coupled with suitable electric motors 10 HP system. The air compressor should be supplied with 02 no. Air dryers(Trident) of suitable capacity compatible with Air compressors with Air Filtration system. The Job also includes cost of material, labour charges of installation, transportation charges of material to the site, tools and tackles charges, all unforeseen items along with allied works.

Medical Air 4 Bar/7Bar Gas Outlet Points(Imported- CE certified body four digit notified body number) along with probes as per given technical specifications

VACUUM SYSTEM Providing and fitting of Indigenious Central Vacuum system with Vacuum pumps of make Ingersoll Rand/Air Tech/Anest Iwata of capacity 40-60 CFM-02Nos.,maximum vacuum-29Hg”,vacuum filter-02Nos., ball valves-03Nos., vacuum tank with capacity 1000 Ltrs-01No., type of drive- V belt , 7.5 HP 3 phase 440V electric motor-02Nos.,Vacuum NRV-01No. The Job also includes cost of material, labour charges of installation, transportation charges of material to the site, tools and tackles charges, all unforeseen items along with allied works.

Vacuum Gas Outlet points (Imported- CE certified body four digit notified body number) along with probes as per given technical specifications.

Ward Suction Unit with 600ml Jar as per given technical specifications.

Operation Theater Suction Unit with 2000ml Jar as per given technical specifications.

AUTO CASCADING COMBINED ELECTRICAL CONTROL PANEL FOR MEDICAL AIR AND VACUUM Supply, Installation, Testing and Commissioning of Combined Electrical Control Panel, for Compressed Air and Vacuum Systems complete with all needed contactors, relays, switches, Hour meters, suitable for Cascading and Duplexing Control, with all needed wiring, cable trays, etc. as per technical specifications. Job also includes Cabling as per site conditions for power to Auto cascading panel from nearby existing Power panel of the hospital.

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 54 mm OD x 1.2 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 42 mm OD x 1.2 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 35 mm OD x 1.2 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 28 mm OD x 0.9 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 22 mm OD x 0.9 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 15 mm OD x 0.9 mm thick

COPPER PIPE AS PER BS EN 13348 (APPROXIMATE LENGTHS) Supply and Installation of following Copper Pipes, as per technical specifications provided, for fabricating the Pipe carcass for this MGPS installation. LVA as per DIN ISO 228/1 for oxygen. along with allied copper fitting i.e Tees, socket, elbows & saddles etc 12 mm OD x 01 mm thick

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 54 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 42 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 35 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 28 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 22 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 15 mm

Supply, Installation, Testing and Commissioning of Degreased ISOLATION VALVE for Oxygen Use, of sizes as under, as per technical specifications provided. 12 mm

Supply, Installation, Testing and Commissioning of Area valves with gauges mounted in a box, of sizes as per technical specifications provided. 4 Gas Services

Supply, Installation, Testing and Commissioning of Area valves with gauges mounted in a box, of sizes as per technical specifications provided. 3 Gas Services

MEDICAL GAS DIGITAL ALARM SYSTEM Supply, Installation, Testing and Commissioning of Master Panel, Slave Panel and other alarm panels, as per technical specifications provided. ACCESSORIES Alarm Panel& Slave Panelvv 3 Gas Services

MEDICAL GAS DIGITAL ALARM SYSTEM Supply, Installation, Testing and Commissioning of Master Panel, Slave Panel and other alarm panels, as per technical specifications provided. ACCESSORIES Alarm Panel& Slave Panel 4 Gas Services

Supply Installation and Testing of Horizontal Bedhead panel, of following sizes, as per Technical specifications. 1200 mm including electrical fitting ie Switches wires Sockets as per site requirements.

Providing and fixing of PuFF panels Shed for MGPS system of size 32’ X 16’ Floor Areafor wall and roof.The roof shall be provided with 0.50 mm thick precoatedprecoloured sheets. The roof sheets shall be laid over a frame work of trusses and purlins and rafters fixed using suitable fasteners. A 0.50 mm pre-coated/ precoloured steel sheets ridge cover of 0.40mm from the eaves wall and 0.30 mm from the gable wall. All four walls shall be made in sandwich panel system using 2 nos. of precoatedprecoloured sheets of 0.50 mm thick fitted with 50 mm thick PUF with bulk density of 40kg/cum. The PUF panels shall be of make Sintex / Llyod / Jindal continuous panel system. The panels shall be inserted one by one in "U" shaped ground track of size 52.5 x 35 x 1.25mm thick made from G.I sheet/sheet coil. The bottom track shall be fixed to the concrete platform level by suitable fasteners screwed on the PVC expandable screw cap. The top of the walls would be concealed with "U" shaped top track of size52.5 x 35 x 1.25mm thick made from G.I sheet/sheet coil. The roof shall be 1:4 approximately as per seismic Zone –IV. Structural steel work riveted and bolted in built up section trusses and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer. Complete job. Providing and fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per the directions of Engineer-in-Charge. The scope of work shall also include dismantling of a portion of the side wall, as required, to facilitate entry and movement of cylinder delivery vehicles. The dismantling shall be done carefully to avoid damage to adjacent structures, and the area shall be restored to its original condition with necessary civil works upon completion of installation. 8’ X 12’. Job includes preparation foundation for storage tanks Air vessel and Vacuum vessel as per the appropriate position. Rising of floor level / platform for the electro-mechanical machinery inside the proposed shed by way of preparation of the flooring, which shall consist of laying a cement concrete bed in 1:3:6 mm, 80 mm with proper thickness before fixing vitrified floor tilesof size 600x600mmin approximately half the designated area. The remaining half portion shall be covered with heavy-duty MS chequered plate for safe storage and movement of gas cylinders. All work shall be carried out as per site conditions and approved layout, ensuring levelled and durable surface suitable for load-bearing applications.The scope of work includes fabrication and installation of an operator room of size 8’ x 8’within the shed using aluminium framework with appropriate wall panelling and glazing. The room shall be fabricated with anodized/powder-coated aluminium sections, fixed with pre-laminated particle board panels or ACP sheets for walls, and provision of glass/acrylic windows for visibility. Electrifcation– Earthing of all the electromechanical equipment and electric Panels and Internal electrification by way of providing wiring for electric points with 1.5 sqmm and for power points including fixing of accessories such as LED tubelights (06nos), Led panel lights 2’x2’ 36 watt -08 nos., ceiling fans (06 nos), wall fan (06no) heavy duty exhaust fans- 08 nos. as per requirement at site. Job incudeswith Disposal of dismantled malba/excavation earth by head load/ M.T including loading/unloading and carriage complete from designated sites and its disposal as per direction of Engineer-in-Charge all inclusive (average lead of 10Km) outside the municipal limits.