Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67.8 LAccepted-AOC NO 71 1ST CROSS MUNESWARA BLOCK PALACE GUTTAHALLI BANGALORE 560 003 | BENGALURU URBAN | KARNATAKA | 560003 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹75.0 L+₹6.0 L (8.76%)Rejected-AOC NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹76.3 L+₹7.3 L (10.6%)Rejected-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L3 | Rejected-AOC NOT LOWEST |
Tender Value
₹80 L
EMD Value
₹1.4 L
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(Army) Bangalore
CWE(Army) Bangalore 101 Dickenson Road Bangalore 42
COMPREHENSIVE MAINTENANCE OF B/R AND E/M SERVICES AT HEBBAL UNDER GE(NORTH) BANGALORE
2023_MES_596288_1
86169/E8
Open Tender
Civil Works
Item Rate
180 days
Bangalore
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE North Bangalore
₹1.4 L
Yes
28 Jun 2023
17 May 2023
21 Jun 2023
17 May 2023
19 Jun 2023
7 Jun 2023
Amount
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm and Re-fixing in same opening after rectify the defects complete all as specified and as directed
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed
Taking down chowkhat (without taking of shutter from the frame) not exceeding 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and as directed
All as per Item No 3 above, but exc 1.50 sqm and not exc 4.00 sqm each
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed
Supply and Fixing of Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed
Material and labour for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS complete all as specified and as directed .
Supply and Fixing of 2nd class hard wood plain, solid, straight chowkhats and frames, clean sawn, frame rebeated on the solid , rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed
Supply and Fixing of Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping / frame to match as per drawing fixed to chowkhats all as specified and as directed
Supply and Fixing of 2nd class hard wood 35 mm thick glazed and skeleton shutters as in doors open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.
Supply and Fixing of Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. rail and style are of 2nd class hardwood & The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated fixed to chowkhat all as specified and as directed.
Supply and Fixing of mild steel work as in hold fast made in flat iron all as specified and as directed.
Material and labour for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified .
Material and labour Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.
Supply and Fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Material and labour for powder coated aluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and as direction of Engineer-in-charge.
Supply and Fixing of Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontally) all as specified and as directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wire mesh etc. (ii) Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle, hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)
Material and labour for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling boarding, any description, fixed in any position with nails all as specified and as directed.
Dismantling of framed fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.
Material and labour for plain cement concrete for filling of steel door frame/box type steel window/vent type C0,1:3:6 using 12.50mm grade stone aggregate all as specified and as directed.
Supply only Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and all as specified.
Supply only Sheet glass 4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beading putty in square exceeding 0.5 Sqm in each pane and all as specified.
Material and labour for 5mm thick sheet glass, ordinary quality and glazing with screw in square exc 0.5 sq. m in each pane including glazing clips/beading, rubber etc including Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.
Supply only stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple all as specified and as directed.
Dismantling of structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.
Supply and Fixing of framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop/factory before fabrication complete all as specified and as directed
Supply and Fixing of 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and as directed
Material and labour for preparing new wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces all as specified and as directed.
Supply and Fixing of Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed
Supply and Fixing of Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed
Supply and Fixing of Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed
Supply and Fixing of Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
Supply and Fixing of 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
Supply and Fixing of 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
Supply and Fixing of aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed
Supply and Fixing of 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.
Supply and Fixing of mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed
Supply and Fixing of aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs complete all as specified and as directed.
Supply and Fixing of Rubber door buffer 125mm size fixed with brass screws complete all as specified and as directed
Supply and Fixing of Eye doors viewer(Magic eye) made of stainless steel complete all as specified and as directed
Material and labour 4 mm thick figured glass, pin head type and glazing with oil putty/wooden or steel beading in squares not exceeding 0.5 Sqm in each pane all as specified and as directed. Including Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.
Material and labour for 3mm thick Sheet glass, ordinary quality and glazing with oil putty / wooden or steel beading in squares not exc 0.5 sqm in each pane all as specified and as directed. Including Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.
Supply and Fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw or nut bolts with or without wooden or steel beading in repairs all as specified and as directed.
Supply and Fixing in repairs Aluminium anodised barrel towel bolts of extruded section of length 150 mm all as specified and as directed.
Material and labour in repairs for Aluminium anodised barrel towel bolts of extruded section of length 200 mm all as specified and as directed.
Material and labour in repairs for Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed.
Material and labour in repairs for Extruded alloy handles fabricated type anodised of size 125 mm all as specified and as directed.
Material and labour in repairs for Extruded alloy handles fabricated type anodised of size 150 mm all as specified and as directed.
Material and labour in repairs for Butt hinges medium weight cold rolled mild steel of size of hinges 100mm
Material and labour in repairs for 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.
Material and labour in repairs for mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
Material and labour in repairs for aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs complete all as specified and as directed.
Material and labour in repairs for Rubber door buffer 125mm size fixed with brass screws complete all as specified and as directed
Material and labour in repairs for Eye doors viewer(Magic eye) made of stainless steel complete all as specified and as directed
Material and labour in repairs for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, alround 6mm thick teak fillets fixed in kitchen Cabinet or cupboards all as specified.
Material and labour for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter including taking down old fillets exc 6 & not exceeding 13 sqcm cross section area all as specified and as directed.
Supply and Fixing of Continuous (piano) hinges 30mm width of flaps (when open) , mild steel, bright finish or electro galvanised all as specified and as directed.
Supply and Fixing of 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed.
Supply and Fixing of Magnet door catcher made of stainless steel complete all as specified and as directed
Supply and Fixing of 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.
Material and labour in repairs for Hasp and staple safety type of size 100 mm of aluminium anodized all as specified and as directed.
Material and labour in repairs for 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.
Material and labour in repairs for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
Supply and Fixing of 4mm thick Non asbestos fibre cement building boards including anodised aluminium snap grid frame work of size of grid 605 x 605mm for false ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws including taking down old ceiling of any description .complete all as specified and as directed.
Material and labour in repairs for stainless steel decorative curtain rod of 20 mm bore with wood finishes (weight not less 300gms per running meter) including fancy finale caps cap etc complete all as specified and as directed
Material and labour in repairs for Bracket for curtain rod of dia 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base etc complete etc complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.
Material and labour for rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates all as specified and as directed.
Supply and Fixing of Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and as directed.
Supply and Fixing of Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and as directed.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed including dismantling of old stone slabs laid bedded and pointed in any mortar complete all as specified and as directed.
Material and labour for Providing edge moulding to 18-20mm thick granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.
Material and labour in repairs for kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed.
Material and labour in repairs for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Material and labour in repairs for stainless steel plate rack of 0.63mm thick sheet, size 600mm x 750mm x 250mm complete all as specified and as directed
Opening of air lock/blockage in GI / CPVC pipe line of any dia from outlet of water tank to all internal GI/CPVC pipes/fittings to smooth flow of water from bib taps/showers/WHB pillar tap/stop valves/ mixers complete by air pressure /water gravity pressure complete all as specified and as directed.
Material and labour in repairs for brass spindle of any type with nylon washer and removing leakage of water of any bib tap/stop valve/angle/Pillar cock/wall/sink mixer suitable for 15mm bore pipe complete all as specified and as directed.
Material and labour in repairs for brass spindle of any type with nylon washer and removing leakage of water of any concealed stop valve suitable for 15mm bore pipe complete all as specified and as directed.
Material and labour in repairs for brass elbow suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for brass elbow (3/4 X ½) suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for Brass Tee suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for Brass Tee suitable for CPVC pipe 25mm outer dia complete all as specified and as directed.
Material and labour in repairs for Male Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for Male Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 25mm outer dia complete all as specified and as directed.
Material and labour in repairs for Female Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for Female Brass Threaded Adaptor (MTA/ MBTA) suitable for CPVC pipe 25mm outer dia complete all as specified and as directed.
Material and labour in repairs for CPVC Tank Adaptor suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for CPVC Tank Adoptor suitable for CPVC pipe 25mm outer dia complete all as specified and as directed.
Material and labour in repairs for CPVC Union suitable for CPVC pipe 20mm outer dia complete all as specified and as directed.
Material and labour in repairs for CPVC Union suitable for CPVC pipe 25mm outer dia complete all as specified and as directed.
Material and labour in repairs for CPVC tank nipple 20mm dia suitable for HDPE water tank all as specified and as directed.(Minimum weight 20mm- 45gms)
Material and labour in repairs for CPVC tank nipple 25mm dia suitable for HDPE water tank all as specified and as directed. (Minimum weight 25mm- 65gms)
Material and labour in repairs for 15mm PTMT extension Nipple all as specified and as directed. (Minimum weight 15mm-18 gms)
Material and labour in repairs for 15mm PTMT flange all as specified and as directed. (Minimum weight 15mm-5gms)
Material and labour in repairs for 20mm CPVC gate valves, with lever , screwed both ends for iron pipe and fixed all as specified and as directed.
Material and labour in repairs for 25mm CPVC gate valves, with lever , screwed both ends for iron pipe and fixed all as specified and as directed.
Material and labour in repairs for Vitreous China wash basin, white, flat back, size 550x400mm including 32 mm dia brass waste coupling ,chromium plated fancy type pillar taps, waste pipe, 600 mm long PVC connection & brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing & supply and waste pipe all as specified and as directed.
Material and labour in repairs for Vitreous china wash down water closet pan ( pedestal Pattern) white, (Including flushing cistern and flush pipe ) , including connection to drain & or outgoing pipe ) and to flushing pipe, anti syphonage pipe, seat and cover for pedestal pan including PVC flushing cistern of 10 litres capacity including 450 mm long PVC connection etc all as specified and as directed.
Material and labour for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap 10 litre PVC flushing cistern,600 mm long PVC connections connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and as directed.
Material and labour in repairs for 10 litre capacity PVC valve less syphonic action flushing cistern low level with inlet ball valve, flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed.
Material and labour in repairs for syphon kit including ball valve, handle etc for low level flushing cistern complete all as specified and as directed.
Supply & laying 20 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified and as directed.
Supply & laying 25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified and as directed.
Material and labour in repairs for Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
Material and labour for wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm and fixed in repairs complete all as specified and as directed.
Material and labour in repairs for sink Brass CP mixer wall mounted for mixing hot & cold water screwed down for iron pipe 15 mm and fixed in repairs complete all as specified and as directed.
Material and labour in repairs for 15mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwd shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and Fixing of 15mm stop valves/ angle valves cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.
Supply and Fixing of 15mm dia two way bib cock with angle valve combination brass chromium plated, fixed in repairs complete all as specified and as directed.
Supply and Fixing of chromium plated long body bib tap 15mm dia with CP flange as fixed in repair complete all as specified and as directed.
Supply and Fixing of bib tap 15mm, standard of CP fancy type, chromium plated any colour high pressure screwed for iron pipe and fixed in repairs complete all as specified and as directed.
Supply and Fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down old complete all as specified and as directed.
Material and labour in repairs for 600 mm long 20mm dia brass chromium plated towel rail stainless steel glossy finish complete all as specified and as directed.
Supply and Fixing of 125mm dia brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed.
Material and labour in repairs for Soap dish chromium plated brass all as fixed in wall as per manufacturer’s instruction and complete all as specified and as directed.
Material and labour in repairs for Toilet paper holder fixed in wall as per manufacturer’s instructions complete all as specified and as directed.
Material and labour in repairs for PVC Mirror cabinet of size 400x500 mm complete all as specified and as directed.
Material and labour in repairs for PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.
Material and labour in repairs for PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
Material and labour for 32 mm dia waste fittings, brass, chromium plated for sinks, basins, etc with long screwed shanks and fly nuts, flange end fixed in repair complete all as specified and as directed.
Material and labour for 75 mm dia waste fittings, brass, chromium plated for sinks etc with long screwed shanks and fly nuts, flange end fixed in repair complete all as specified and as directed.
Material and labour in repairs for 32mm dia, 800mm long corrugated waste pipes complete all as specified and as directed.
Material and labour in repairs for PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and as directed.
Material and labour in repairs for 15mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.
Material and labour in repairs for 20mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.
Material and labour in repairs for 15mm dia Pillar tap PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.
Material and labour in repairs for 15mm dia angle stop valve of PTMT any colour pressed screwed, for iron pipe and fixed complete all as specified and as directed.
Material and labour in repairs for PVC sintex tank cover suitable for circular tanks including hinges and locking arrangements fixed complete all as specified and as directed.
Material and labour in repairs for plastic water closet seat cover for western & indo western pedestal pan closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed.
Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and as directed
Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and as directed
Material and labour for cleaning of PVC/RCC over head water tanks at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus and any other bacterial material from sides/bottom of tank, cleaning shall be done by draining / pumping out water / sludge from bottom, by high pressure water jet of pressure not less than 120 PSI for removing clogged mud/scales etc and cleaning the same again with self priming pumped fresh water and disinfecting the water tank by using UV radiator and approved chemical (chlorite), after cleaning writing letter / figures (Date of cleaning and next Date of cleaning) on black back ground with white synthetic enamel paint including removing the existing letters/ figures complete all as specified and as directed for capacity of water tank exc 250 & n. exc 500 lit capacity Complete all as specified and as directed.
All as per Item No 134 above, but exc 500 litre not exc 1000 ltr capacity
All as per Item No 134 above, but exc 1000 litre not exc 2000 litre capacity
Material and labour for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 20 mm dia ball valve and fittings including dismantling existing water storage tank, Complete all as specified and as directed.
Material and labour for 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 25 mm dia ball valve and fittings including dismantling existing water storage tank, Complete all as specified and as directed.
Material and labour in repairs for 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .
Material and labour in repairs for 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .
Material and labour for providing cement concrete type E2 1:5:10 (40mm graded stone aggregate) in foundations, filling and mass concrete for sunken floor including Demolition of cement concrete exc 15 cm thickness but above ground floors including removal of debris from MD Land complete all as specified and as directed.
Material and labour for water proofing to sunken portions of WCs, bathroom and kitchen etc by applying water based, cold applied, single component, elastomeric in-situ seamless monolithic coating ready to use acrylic modified bituminous liquid membrane with the procedure in sequence all as specified and as directed. SURFACE PREPARATION (i) Removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and cleaning the surface mechanically or by grinding to make it smooth before application. (ii) Repairing all cracks by cutting “V” groove and fill with PMC mortar prepared in the ratio of Shalicrete : cement : sand (1:2:5) or equivalent. (iii) Providing 50 mm x 50 mm coving made out of PMC mortar as above. MATERIAL PREPARATION (i) Stir TarFelt® LM or equivalent by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure a homogenous mix. (ii) After stirring, wait for the product to settle in order to let entrapped air escape. WATERPROOFING APPLICATION (i) Slightly damp the surface. Avoid standing water / ponding. (ii) Prime the surface with a mixture of TarFelt® LM or equivalent and potable water in the ratio of 50:50 and apply @400 grm / m2 of the mixture and allow it to touch dry. (iii) Apply first coat of TarFwlt® LM @ 0.70 kg / m2 by brush / roller / airless spray while the primed surface is tracky, For faster and smoother application, airless spray is preferred. (iv) Spread fiber glass net of 45 gsm with overlap of 50 mm in both directions when the surface is till tackty. (v) Allow 1st coat to dry for 10-12 hrs. (vi) Apply second coat of TarFelt® LM @ 0.70 kg m2 by brush / roller / airless spray for final DFT of 1000 micron in two coats inclusive of fibre glass of 45 gsm (theoretical coverage depending on surface conditions). (vii) Sprinkle sand @ 200 grm / m2 over the final vertical coating when the surface is still tackty to facilitate plastering. (viii) Ensure final curing time of 36 hrs before allowing / carrying out any further work. (ix) Conduct ponding test after 7 days of curing at ambient temperature.
Demolition of brick/stone/boulder /precast concrete articles and precast concrete block built in cement mortar etc Complete all as specified and as directed.
Material and labour for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 , complete etc complete all as specified and as directed
Material and labour for Pre-cast cement concrete block masonry, type C1 1:3:6(using 20mm graded aggregate) in CM 1:6 with solid blocks, exc 10cm in width and setting in mortar, Complete all as specified and as directed.
Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris to outside MD land Complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15 mm thick in two coat(10mm thick in Cement mortar 1:4 + 5mm thick in Cement mortar 1:4 using WPC)on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid separately
Supply only liquid water proofing compound
Material and labour for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour Preparation of newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty complete all as specified and as directed
Material and labour preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and as directed.
Material and labour for Preparation of newly plastered surfaces of wall / chajjas etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the minor racks etc with crack filling material all as per manufacturer’s instructions complete all as specified and as directed.
Material and labour for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.
Material and labour in repairs for 32mm dia GI pipe (one side perforated) in spout of sunken floor complete all as specified and as directed.
Material and labour in repairs for 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings complete all as specified and as directed.
Material and labour in repairs for 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary fittings complete all as specified and as directed.
Material and labour in repairs for 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings complete all as specified and as directed.
Material and labour in repairs for 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary fittings complete all as specified and as directed.
Supply and Fixing of 75mm dia PVC (SWR) Bends with access door of any radius complete all as specified and as directed.
Ditto, but 110mm dia complete all as specified and as directed.
Supply and Fixing of 75mm dia PVC (SWR) junction single(single T) equal or unequal with access door complete all as specified and as directed.
Ditto, but 110mm dia complete all as specified and as directed.
Supply and Fixing of 110mm PVC (SWR) branch piece, double (single Y) equal or unequal complete all as specified and as directed.
Supply and Fixing of 110mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.
Material and labour in repairs for 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Material and labour in repairs for grating doom 100 mm dia of PTMT complete all as specified and as directed
Material and labour in repairs for door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (extruded section)body complete all as specified and as directed.
Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.
Dismantling of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and as directed.
Dismantling of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed.
Material and labour for cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) 25mm thick finished even as in levelling concrete for floor complete all as specified and as directed.
Material and labour for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base/plinth protection complete all as specified and as directed.
Material and labour for providing 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off from premises complete all as specified and as directed.
Material and labour for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.
Material and labour Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.
Material and labour Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.
Material and labour for Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 10mm thick in screed CM 1:4 on brick work or concrete surfaces to receive wall tiles all as specified and as directed.
Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set ,jointed and pointed in neat cement slurry in floors.(with grey cement and pigments) over 20mm screed bed or bedding layer of mortar in CM 1:6 complete all as specified and as directed.
Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
Material and labour for Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.
Material and labour 40mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring complete all as specified and as directed.
Renewing Glazed tiles/non-skid tiles in patches, area not exceeding 5 sqm. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.
Taking down of existing Water Proofing treatment of any type (APP Membrane, Cement or earthen tile, Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud pushka dirt’s etc over original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust & to providing water proofing treatment complete all as specified and as directed. Note : Rate includes for removing debris outside defence land.
Material and labour for demolition & removal of cement concrete/padding concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed Note : Rate includes for removing debris outside defence land
Material and labour providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing up to 60cm height, levelling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Material and labour for providing Water Proofing Treatment to RCC roofs in repairs as per the following specification i) After cleaning Concrete should be thoroughly inspected for any minor cracks on existing roof, and should be sealed with grouting and crack filling materials ii) Cement screed 15 mm thickness in CM (1:4) in slope, admixed with FOSROC Nitobond SBR at 2% by weight of cement equivalent products of Pidilite/ Dr Fixit Super Latex/ Asian Paints/ M/s MC Bauchemic CIPY/ SIKA / Thermax / STP to be applied as per manufacturer's instructions. iii) Clean the surface and apply FOSROC Nito proof 650 P over a priming coat of FOSROC Nito proof W Primer or equivalent product of Asian paints Fixit / Thermax /STP applied as per manufacturer's instructions. iv) Providing and laying / fixing TPO (Thermoplastic Polyolefin) waterproofing membrane on prepared surface of roof & up to 300mm of parapets and crumple joint including junction of roof and parapet by cleaning the surface and laying FOSROC Proofex ORG (minimum 1.2 mm thick for in-accessible roof 2 mm for accessible roofs) with Proofex OGP Adhesive over a min. 200 GSM Geo textile or Asian Paints TPO or equivalent product of M/s MC Bauchemie / CIPY/ SIKA/ Pidilite Dr Fixit TPO membrane, applied as per manufacturer's instructions complete all as specified and as directed.
Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).Capacity in litres exc 250 & n exc 500 complete all as specified and as directed.
Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).Capacity in litres Exc 500 & not exc 1000 complete all as specified and as directed.
Preparation of old decorated surfaces and applying one coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the minor racks etc with crack filling material all as per manufacturer’s instructions complete all as specified and as directed.
Preparation of old decorated surfaces and applying one coat of white wash on walls including in narrow widths/ bands etc complete all specified and as directed.
Preparation of old decorated surfaces and applying two coats of white wash on walls including in narrow widths/ bands etc complete all specified and as directed.
Preparation of old decorated surfaces and applying one coat of white wash on ceilings including in narrow widths/ bands etc complete all specified and as directed.
Preparation of old painted surface and applying one coat of synthetic enamel paint on steel and iron surfaces over 10cm width or girth complete all as specified and as directed.
Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wood and wood based surfaces over 10cm width or girth complete all as specified and as directed.
Preparation of old decorated surfaces including washing, rubbing down and stopping and applying one coat of oil emulsion distemper on walls complete all as specified and as directed.
Preparation of old decorated surfaces including washing, rubbing down and stopping and applying two coats of oil emulsion distemper on walls including necessary putty complete all as specified and as directed.
Material and labour for Complete removal of existing treatment on walls of any description over 10cm girth or width and applying two coats of oil emulsion distemper over one coat of alkali resistant primer over one coat of chalk whiting putty on plastered surfaces of walls including in narrow widths/ bands etc complete all specified and as directed.
Preparation of old decorated surfaces including washing, rubbing down and stopping and applying one coat of oil emulsion distemper on Ceiling complete all as specified and as directed.
Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of cement base paint at any position complete all as specified and as directed.
Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying two coats of cement base paint at any position complete all as specified and as directed.
Mechanically pumping out sewage liquid from septic tanks of any size and depth and removal the same to distance/place as earmarked by state auth outside defence land including any type of T & P required etc. dewatering of water complete all as directed. Note:-Loading unloading weight of vehicle to be given at submitted for payment purpose complete all as specified and as directed.
Removing carefully the cover slabs of man holes of any size and shape and removing the scum/sludge including any organic or inorganic matters to a distance exc 50m and not exc 1500m and depositing eco friendly where as directed by engineer-in-charge and setting the man hole cover in position in CM (1:6 ) after cleaning the sludge up to 1.50mtr depths of manholes complete all as specified and as directed. Note: Manhole cover if provided new shall be measured & paid separately.
All as per item No 204 but depth of manhole exc 1.5m but n.exc 3.00mtr
All as per item No 204 but depth of manhole exc 3.00m but not exc 4.00mtr
Note:- (a) Contractor shall detail his supervisor to office of AGE B/R North daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. (b) Contractor shall provide service providers (sweepers) both the complaint cell located as per the complaints list given along with all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detected/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 200/- per complaint shall affected from contractor payments. (e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.
Cleaning of blocked sewage drain pipe 110mm dia till the flow of sewage/sludge water is smooth including taking out all sludge/mud from pipes by means of roding & remove to a distance exc 50m and n.exc 1500m and depositing eco friendly where as directed by engineer in charge complete all as specified and as directed for following size of pipes:-
All as per item No 208 but internal Dia of the Pipe 150mm
All as per item No 208 but internal Dia of the Pipe 200mm
All as per item No 208 but internal Dia of the Pipe 300mm
Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor/ nahani traps, soil waste/vent pipes gully trap up to 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a place as earmarked by state authorities outside the defence land to the entire satisfaction of engineer-in-charge complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and as directed
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar for 150 mm internal dia of pipe complete all as specified and as directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar for 200 mm internal dia of pipe complete all as specified and as directed.
Material and labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed.
Material and labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed.
Material and labour for laying DWCP 150 mm dia pipes in trenches Class SN-4 conforming to IS 16098 (Part-2) in 6 metre length with coupler complete all as specified and as directed.
Material and labour for laying DWCP 200 mm dia pipes in trenches Class SN-4 conforming to IS 16098 (Part -2) in 6 metre length with coupler complete all as specified and as directed.
Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.
Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and as directed.
Material and labour for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and as directed.
Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.
Material and labour for cement concrete 1:2:4 type, B0 using 12.5mm graded stone aggregates as in copings, fixing of post/ Chajja kerbs, roof padding/staging of water tank etc including necessary from work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed
Material and labour Extra for forming fair finished drain or channel 15/20/30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.
Material and labour for spraying anti weed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of plant/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) including painting to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings with necessary scaffolding up to First floor, complete all as specified and as directed by Engineer-in-charge. NOTE: - Contractor has to execute the work of de-generated plant/weeds as per the prior approval and directions of Engineer-in-charge.
All as per Item No 228 above, but from first floor to second floor
All as per Item No 228 above, but from second floor to third floor
Material and labour for cleaning of Roof at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus , leaves etc deposited over slab and making good the disturbed surfaces if any with and including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and removing the material so obtained out side complete all as specified and as directed by Engineer-in-charge.
Material and labour in repairs for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe ) but including Concussive push button taps of cast copper alloy, screwed for iron pipe, PTMT waste coupling suitable for urinals, (Minimum weight 32mm-45gms urinal spreader and 450 mm long PVC connection and PVC urinal waste pipe complete all as specified and as directed.
Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.
Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories concealed in walls including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following
(a) One light point controlled by one switch
(b) One fan point controlled by one switch/regulator
(c) One light point controlled by 2 way switch
(d) One 3 pin socket out let 5 Amps on independent board
(e) one bell/buzzer point controlled by bell push
(f) one 3 pin socket out let 5 A on same board
Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories concealed type wiring including GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following
(a) One light point controlled by one switch
(b) One fan point controlled by one switch/regulator
(c) One light point controlled by 2 way switch
(d) One 3 pin socket out let 5 Amps on independent board
(e) one bell/buzzer point controlled by bell push
(f) one 3 pin socket out let 5 A on same board
All as per item No 235 but concealed wiring drawn through existing PVC conduit complete all as specified and as directed.
(a) One light point controlled by one switch
(b) One fan/Exhaust point controlled by one switch/regulator
(c) One light point controlled by 2 way switch
(d) One 3 pin socket out let 5 Amps on independent board
(e) One bell/buzzer point controlled by bell push
(f) One 3 pin socket out let 5 A on same board
Wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through non-metallic existing PVC conduit medium density ISI marked including accessories surface type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.
Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing non metallic rigid PVC conduit and conduit accessories complete all as specified and as directed.
Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including PVC Casing & Capping ISI marked including accessories surface type wiring including 1.6 mm thick MS sunken boxes concealed on walls including laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following
(a) One light point controlled by one switch
(b) One fan point controlled by one switch/regulator
(c) One light point controlled by 2 way switch
(d) One 3 pin socket out let 5 Amps on independent board
(e) one bell/buzzer point controlled by bell push
(f) one 3 pin socket out let 5 A on same board
Wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic PVC conduit medium density ISI marked including accessories concealed type Modular/normal run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.
Wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including PVC casing capping ISI marked including accessories surface type wiring run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.
Note for Item No 234 to 241:- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.
Supply and Fixing of LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings complete all as specified and as directed
Supply and Fixing of LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white acrylic cover complete with all accessories including taking out old fittings complete all as specified and as directed.
Supply and Fixing of 2 x 2 Recess mounted LED Luminaries 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover complete with all accessories all including taking out old fittings as specified and as directed.
Supply and Fixing of 1 x 1 Surface mounted LED Luminaries 24 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover complete with all accessories all including taking out old fittings complete all as specified and as directed.
Supply and Fixing of Bulkhead LED luminaries 10 watt energy efficient solution for upgrading conventional with IP 65 including taking out old fittings complete all as specified and as directed.
Supply and Fix Modular switch 1 way 6A,1 module complete all as specified and as directed.
Supply and fix Modular switch 1 way 16A, 1 module complete all as specified and as directed.
Supply and fix Modular switch 2 way 6A,1 module complete all as specified and as directed.
Supply and Fix Modular Bell push 6A 1 module complete all as specified and as directed.
Supply and fix modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.
Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.
Supply and fix modular type Fan step regulator, 120W - 2 module complete all as specified and as directed.
Material and labour for replacement of Switch piano flush button single pole two way 5 Amps complete all as specified and as directed.
Material and labour for replacement of Angle holder PVC/polycarbonate type complete all as specified and as directed.
Material and labour for replacement of switch piano flush type single pole one way 5 Amps complete all as specified and as directed.
Material and labour for replacement of switch socket combination 5 pin 2 in 1, 5 A Flush type complete all as specified and as directed.
Material and labour for replacement of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal complete all as specified and as directed.
Material and labour for replacement of socket outlet 2 in 1, 3 pin 5 A complete all as specified and as directed.
Material and labour for replacement of bell push flush type 5A complete all as specified and as directed.
Material and labour for replacement of MCB SPN 240 volts 32/40 Amps complete complete all as specified and as directed.
Material and labour for replacement of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed
Material and labour for replacement of MCB TPN 415 volts, 10KA 'C' curve 63 Amps complete all as specified and as directed
Material and labour for replacement of MCB TPN 415 volts, 10KA 'C' curve 100 Amps complete all as specified and as directed
Material and labour for replacement of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar complete all as specified and as directed.
Material and labour for replacement of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.
Material and labour for replacement of MCB DB TPN 4 way with double door type 415 volts with 200 Amps rated bus bar for housing MCBs complete all as specified and as directed.
Material and labour for replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals complete all as specified and as directed.
Material and labour for replacement of stepped type electronic fan regulator flush Switch/socket type complete all as specified and as directed.
Material and labour for replacement of Ding Dong bell AC 230 volts single pole complete all as specified and as directed.
Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqmm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit complete all as specified and as directed.
Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqmm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit complete all as specified and as directed.
Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5 Sqmm along with 2.5 Sqmm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.5 metre connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 metre long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as specified and as directed.
Supply and Fixing of LED lamp suitable to fit in angle holder of capacity 09 watt complete all as specified and as directed.
Supply and Fixing of 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate diffuser with IP 66 protection including taking out old fittings complete all as specified and as directed.
Supply and Fixing of Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminium paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and as directed.
Supply and Fixing of ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE rating complete including writing MES NO complete all as specified and as directed.
Material and labour for replacement PVC Fresh air fan of 200mm sweep 1200/1400 RPM with louver complete all as specified and as directed.
Material and labour for replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
Inspection, taking down, dismantling of geysers of any type/capacity, cleaning, descaling, reassembling & reinstallation on the old place incl hydraulic pressure test of container with hand operated hydraulic pump complete, brazing inner tank, internal wiring and reinstallation after necessary repair/replacement of old parts complete all as specified and as directed. Note: Replacement of old parts shall be measured & paid separately.
(a) Supply only stainless/Mild steel inner tank of capacity 25 litres unit including internally assembly of any size and type complete all as specified & as directed.
(b)Supply only internal assembly/apparatus rod unit of any size and type of capacity 25 litres complete all as specified & as directed.
(c) Supply only heating element of 2 KW rating triangular/round type as per existing size and type including rubber washers all as specified & as directed.
(d) Supply only heating element of 2 KW rating Hexagonal spiral/bend type as per existing size and type including rubber washers all as specified & as directed.
(e) Supply only Thermostat/auto cut off of suitable size and type for 25/50 Ltrs capacity of any size.
(f) Supply only Indicator lamp red and green type square/round.
(g) Supply only Safety valve/high pressure valve/NRV of existing type ISI marked.
(h) Supply only PVC insulated Copper cable flexible 3 core of size 40/0.0076 ISI marked.
(j) Supply only outer cover of geyser for capacity 25 litres unit complete with all fitting and fixtures as specified and as directed.
(k) Supply only PVC flexible pipe 16mm dia 450mm long with 2 Nos of brass ferrule & rubber washer for hot and cold water all as specified & as directed. (Set of 2)
Material and labour for Preparation old painted surface & painting the geyser complete after cleaning & applying the same one coat of spray paint of white enamel, writing MES No including taking down and refixing in same or other place complete all as specified and as directed.
Taking down ceiling fan 1200mm/1400mm and wall mounted fan 300/450 mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pulley etc., including refixing and connecting the same complete all as specified and as directed.
Inspection, disconnecting electric connecting and dismantling of ceiling fan/exhaust/wall mounted fan of any type/size, cleaning including oiling and greasing the bearing, tighting of nuts and bolts and refixing on the old place complete after necessary repair/replacement of old parts complete all as specified and as directed. . Note: Replacement of old parts shall be measured & paid separately.
(a) Supply only ball bearing of various sizes / make as required for ceiling fans/wall mounting/exhaust fan including greasing complete all as specified and as directed.
(b) Supply only Gun metal bush of any size/make suitable for ceiling fans complete all as specified and as directed.
(c) Supply only capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed.
(d) Supply only capacitor 4.0 Mfd suitable for ceiling / exhaust/wall mounting fans complete all as specified and as directed.
(e) PVC flexible cable twin twisted core of 23/0.0076 size multi stranded copper conductor suitable for connecting ceiling fans / exhaust /wall mounting fans complete all as specified and as directed.
(f) Rubber bush with MS bolts, nuts & washers with 'U' clamps for ceiling fans complete all as specified and as directed.
Dismantling /opening the ceiling fan of 1200 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling/re-fixing in its location complete all as specified and as directed.
Dismantling /opening the ceiling fan of 1400 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.
Dismantling /opening the wall mounted fan of 300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.
Taking down exhaust fans 230 mm/300mm / 450mm sweep from position by duly disconnecting electric lines, preparing the surfaces, filling cavities with filler, after cleaning all dust, spray painting with one finishing coat of synthetic enamel paint including writing MES NO and replacing the split pin, rubber pulley etc., including refixing and connecting the same complete all as specified and as directed.
Dismantling /opening the exhaust fan of 230 mm/300 mm sweep of any make and type, removing the old defective winding carefully, cleaning the inner parts and rewinding with the same gauge supper enamelled copper conductor of good insulation, varnishing, drying and reassembling complete all as specified and as directed.
Material and labour extension of down rod for ceiling fan up to 1.5 mtr including nut, bolts , washers complete accessories complete all as specified and as directed.
Removing the window type AC/Split type AC of 1.0/1.5/2.0 ton capacity from location servicing the AC, cleaning the condenser and evaporator coil by blower, checking the electrical wiring, replacement of burnt out wiring terminals, cleaning the air filter, gas charging, adjusting relays etc., replacement of unserviceable spare parts and fixing back at location, testing and commissioning complete all as specified and as directed.
Removing the split type AC of any make from position transporting to a reputed workshop, cutting the suction and discharge line of unserviceable compressor and replace with new factory made hermetically sealed compressor of same make and type, connecting the suction and discharge line, vacuuming the entire system, arresting all leakages, charging of required quantity of refrigerant, adjusting relays, thermostat etc bringing back and installing in its original position including testing and commissioning complete all as directed for the following capacities:-
(a) 1.5 ton capacity
(b) 2.0 ton capacity
Note for item No 291 to 292 :- (i) Gas will be measured and paid separately under relevant item of this schedule. (ii) Spares cost more than 200 Rs will be measured and paid separately under relevant item of this schedule.
Labour only for charging of refrigerant gas (R-22/410A/134A) of required quantity for split/window type AC including leak detection by using nitrogen gas and arresting leakages if any by necessary brazing and flushing the system complete and testing complete for the following capacities:
Removing the damaged/unserviceable fan blades from the condenser motor shaft and replace new fan blade of the same size and type for any capacity of window type AC and water coolers complete all as specified and as directed.
Removing the unserviceable thermostat and Supply and fix new thermostat of same make and type for Split/window type AC 1.5/2 ton capacity complete all as specified and as directed. (Make- Indfos/Danfoss)
Removing the unserviceable condenser unit & supply & fix new condenser unit connecting to the discharge line, brazing, vaccumising & gas charging the unit with required quantity of refrigerant for Split/window type AC of 1.5/2 Ton capacity and testing complete all as directed.
Removing the unserviceable running capacitor of 40 MFD, Supply and fix of new capacitor suitable for 1.5 ton AC complete all as specified and as directed. make: - BHEL / EPCOS/ TDK/ TIBCON or equivalent.
All as per item No 298 herein before, but starting capacitor of 80/100 MFD for 1.5 TR/2 TR AC complete all as specified and as directed.
Removing the unserviceable over load protection and Supply and fix new over load protector for split/window type AC of 1.5/2.0 TR capacity complete all as specified and as directed.
Supply and fill refrigerant gas (R-22/410A/134A) for domestic cooling appliance complete all as specified and as directed.
Disconnecting and taking out the unserviceable sensor/remote unit completely and supply and fix new sensor unit of indoor unit of AC to suit the AC of Makes carrier/Blue star/Voltas complete all as specified and as directed.
(a)1.5 Ton Split type AC
(b) 2 Ton Split type AC
Disconnecting and taking out the unserviceable PCB, refixing new PCB for split AC / window AC any type and any make 1.5 Ton, 2 Ton capacity all as directed.
(a) 1.5 Ton Split type AC
(b) 2 Ton Split type AC
Disconnecting and taking out PCB from split AC, repairing the same and refixing in original location complete all as specified and as directed for 1.5/2 Ton capacity complete all as specified and as directed.
Disconnect electrical connection, removing copper line, discharge line of split type AC up to 2 Ton capacity including indoor and out door units and all accessories and shifting/ reinstalling and testing the whole unit of split type AC in new location with suitable size and length of copper pipe and making the holes in walls complete all as specified and as directed.
Supply and fix plastic/coir filter suitable for Split/window type AC 1.5/2 Ton capacity including taking down old unsv filter etc complete all as specified and as directed.
Material and labour for replacement of brass angle valve for gas charging for split AC 1.5/2 ton of AC complete all as specified and as directed.
Material and labour for replacement of swing motor of existing capacity and type for indoor unit of split AC fins complete all as specified and as directed
Material and labour for replacement of MS fabrication clamps for hanging, fan including hook as existing complete all as specified and as directed
Material and labour for replacement of Nitrile rubber insulation for suction and discharged pipe of split type AC of size 15/19 mm dia complete all as specified and as directed.
Material and labour for replacement of Soft copper tubing 15mm dia with nitrile rubber insulation for split type AC complete all as specified and as directed.
Material and labour for replacement of Soft copper tubing 19mm dia with nitrile rubber insulation for split type AC complete all as specified and as directed.
PRACHANIVA CONSTRUCTIONS
B5BUILDING SOLUTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .