Canal Water Based Water Supply Project for Construction of 4.0 MLD Water Treatment Plant (WTP) and other related works including 5 years Operation and Maintenance at Bhagta Bhai Ka, District Bathinda, Punjab under AMRUT 2.0 Scheme

Canal intake :

Raw Water Rising Main from Intake Sump to SS Tank at WTP

Intake Pumping Station

Raw Water Sump, Pumping Machinery and Panel Room at WTP

Water Treatment Plant

Capacity : 4.0 MLD at Rs.44.16 Lakh / MLD

Mixing Chamber, Valve Chamber & CCT :

Clear water reservoir : (CWR)

Clear Water Rising Main (CW-RM) WTP To OHSRs (DI S & S IS ; 8329 DI K-9)

Distribution line within WTP premises

Boundary wall with Barbed wire fencing

Dismantling of Existing Structures Filter beds (04 Nos.), HLT tanks (02 Nos.), Clear Water tanks (02 Nos.), Pump House (01 No.), Staff Quarter (01 No.) and Storage & Sedimentation Tanks (01 No.)

Re-Development of Existing SS Tank

Earth Filling Work in WTP Area

Capital Cost - (A) Civil Works

Intake

Intake Pumping Station

Raw Water Pumping Station including Floating Arms

S&S Tank - Dewatering Pumps

Clear Water Pumping Station

Gate for outlet of CWR

Sub Total - (B) Mechanical Works

Intake Pumping Station

Raw & Clear Water Pumping Station

Sub-Station for Raw & Clear water Pumping Station and WTP

SCADA for Intake, Raw Water & Clear Water Pumping Station, WTP & Sub-Station

Sub Total - (C) Electrical Works

Sub Total (A+B+C): Capital Cost = Civil + Mechanical + Electrical Works

Provisional Sum (Not Part of Bidding) (Rs. in Lakhs)

Provisional Sum

(A) Provisional Sum : (Capital Cost)

Price Escalation

Contingencies = 1 % of Capital Cost

B & R deposit

Shifting of Utilities (Electric Poles, W/S.and Sewerage Pipeline, Other Service Utilities)

Permission for BT bill :

W.R.D. deposit work charges for providing Raw Water and Construction of Cross regulator if there is no existing cross regulator.

SH crossing : 1 no.

Back up : ( BG : 2.20 lakh + Licence fee : 1.20 lakh + Road cutting & restoration : 0.94 lakh ) BT = 20.0 m x 1.30 m = 26 sqm x Rs.3600 /sqm =Rs. 0.94 Lakh KC = 130.0 m x 1.0 m = 130 sqm x Rs.100 /sqm =Rs. 0.13 Lakh

Drainage cum mining & Geology (Water Resources Department)

Electrical connections charges

Sub Total (A) Provisional Sum

(B) PWSSB Charges :

Contingencies Charges on work @ 1% ( To be paid on actual limited to maximum @ 1% of Capital cost)

Sub Total (B) PWSSB Charges and Cess

Sub Total : Provisional Sum (Not Part of Bidding)

CIVIL WORKS

RCC Valve Chamber at Intake near Canal

1. Capital Works CSR based Items

Earthwork in excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Extra depth excavation : > 1.50 m.

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 60 m.

Rate for loading :

Rate for loading into wagons, trucks or boats within 15 metres lead.

Carriage of Earth :

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters.

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or Battering.)

C / shuttering :

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / shuttering :

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, includingjointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge).

GI Pipe : (Rising pipe for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff.in Rates of Materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Steel

Extra rate for OPC (Ordinary Portland Cement)

Carriage of Materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (i): CSR Amount after adding 5.35% (In Rs)

Rising main from Canal to Raw Water Channel

1. Capital Works CSR based Items

Excavation : (Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys,etc.Complete in all respects.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (ii): CSR Amount after adding 5.35% : (Rs)

Raw Water Concrete Channel : 7.0 x 1.0 x 4.3 m

1. Capital Works CSR based Items

Excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth :

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading :

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.30 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for using admixture in designed mix concrete.

Shuttering : ( Raft foundation)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C /shuttering : (Platform slab for operation of Manual screen)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

Safety foot rest :

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230 x150 x75 cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

MS Railing for Operation platform Bar screen :

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping (M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm. (for EHD and HD)

Diff. Rates of materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Steel

Extra rate for OPC (Ordinary Portland Cement)

Carriage of materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (iii): CSR items Amount : ( Rs)

Raw Water Rising Main from Intake Sump to Raw Water S&S Tank at WTP

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys,etc.Complete in all respects.

Sluice Valve :

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, includingjointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge).

Scour Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

Sluice Valves flanged.(100 mm.i/d)

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

Valve chambers :

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Air Vent Arrangements :

Excavation for Supporting Block :

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Support Block with RCC M-20 :

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

Difference rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Bathinda

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Fine Sand 65 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Air Valve :

Based on PHED Rajasthan 2023 Code no.6.6

Class PN 1.0

CI Ventilator Cowl :

Chhattisgarh CSR June 2020 Item no.26.3

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (2) (i) : CSR Amount : ( Rs)

Concrete Encasement for Pipeline Crossing

1. Capital Works CSR based Items

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

C / shuttering :

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

Diff.in Rates of Materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC

Carriage of Materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (2) (ii): CSR items Amount : ( Rs)

Road Works for Raw Water Rising Main (RW-RM)

1. Capital Works CSR based Items

Dismantling of Road Works

Flexible pavements :

Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement,including removal of rubbish etc., disposal of unserviceable material to the dumping ground,for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Restoration of Road Works

Restoration of CC.Road Base course : CC.1:8:16

Cement concrete 1:8:16

At Through Rate : 40%

Through Rate without stone aggregates cost: 60%

Sand Qty :

CSR based Item

Providing and filling fine sand grading as per specifications or coarse grade around the various sizes of G.I.pipes in exteranal work.

Carriage of materials :

Carriage of material : (For CC.1:2:4 & 1:8:16)

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Fine Sand 60 km

CSR Ref.

Interlock Paver Block :

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade manufactured by block making machine equipped with steel mmould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in Ordinary Grey Colour and patteren over and including 40 mm thick compacted bed of coarse sand,filling the joints with fine sand etc. all complete as per directions of Engineer-in-charge.

At Through Rate : 30%

At Labour Rate : 70%

Compacting Original Ground below embankment :

WBM Grade-II :

At Through Rate : 40%

At Labour Rate : 60%

WBM Grade-I:

At Through Rate : 40%

At Labour Rate : 60%

Carriage of materials :

Carriage of stone aggregate : (For WBM)

Mirthal 219 Km

CSR ref.

For stone metal :

Prime coat

Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm complete as per technical clause 502 of MORT&H specifications.

Tack coat

Surface dressing :

Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1 kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of MORTH & H specifications.

Open graded pre mix surface :

Seal coat type B :

Carriage of materials :

Carriage of stone aggregate : (For Surface dressing & Open graded pre mix surface) Crushed Bajri (12.5 / 13.2 mm ) :

Mirthal 219 Km

Carriage of stone aggregate : (For Surface dressing & Open graded pre mix surface) Crushed Bajri (10.0 / 11.2 mm ) :

Mirthal 219 Km

Coarse sand :

Carriage of Coarse sand : (For seal coat type-B)

Lohand Khad 216 Km.

CSR Ref.

For stone metal

Carriage of materials :

Carriage of Bitumen : Round the Trip lead is considered from Panipat Refinery.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (2) (iii) : CSR Amount after adding 5.35% : (Rs)

Raw Water Channel

1. Capital Works CSR based Items

Excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth :

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading :

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC work done above 4 meters height (where any single storey exceeds 4 meters in height) for every additional height of 1 meters or thereof.

> 4.0 mt.height

Extra for using admixture in designed mix concrete.

Shuttering : ( Raft foundation)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

Extra rate for shuttering :

Extra for shuttering work done above 4 meters height (where any single storey exceeds 4 meters in height) for every additional height of 1 meters or thereof.

C /shuttering : (Platform slab for operation of Manual screen)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

Safety foot rest :

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230 x150 x75 cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

MS Railing for Operation platform Bar screen :

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping (M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm. (for EHD and HD)

Diff. Rates of materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Steel

Extra rate for OPC (Ordinary Portland Cement)

Carriage of materials :

Bajri :

Mirthal 219 Km

Coarse sand :

Lohand Khad 216 Km.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (3) (i): CSR + Non CSR Amount : ( Rs)

Intake Sump with Pumping Station

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Extra for using admixture in designed mix concrete.

Cold twisted deformed (Ribbed / Tor steel) Bars (Fe 500 grade as per IS : 1786-2008) for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding, placing in position complete.

Shuttering

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

Manhole Cover :

Providing and fixing RCC manhole covers only

Pump Chamber above GL

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Brickwork in CM.1:5 in first storey. :

Plaster : 20 mm.thick in CM 1:4 :

cement Pointing 1:2 deep variety

White washing :

White washing (three coat)

Distempering (OBD) : Inside Painting :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.

Exterior paint :

Finishing walls with cement based water soluble exterior paint such as snowcem,robbiacem etc.on old work two coat to give an even shade.

Cement Concrete 1:2:4 gola :

Cement concrete 1:2:4 gola 10 cm.*10 cm. concave quadrant along junction of roofs with parapet wall finished smooth,where specially specified.

Top Khurra :

Top khurra 0.6 m.*0.6 m. for rain water pipe in 25 mm.thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Rain water pipes :

Providing and fixing 110 mm. dia. SWR U.P.V.C. Rain water pipe ( ring fitted type-A) sa per IS : 13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in-charge.( If fixed on wall face clamp to be paid seperately as per respective items).

Rain Water Pipe bend :

Rain Water Pipe coupling/socket :

40 mm.Thick Grey Polished Floor :

50 mm thick ironite ( Metallic Floor Hardner to be mixed with Granolithic topping for heavy duty floors) floor consisiting of 40mm thick cement concrete 1:2:4 base and top layer 10mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6mm gauge by volume finished smooth with hard rubbing

Door & Windows

Rolling Shutter :

Diff. rates of materials :

Bajri :

Coarse sand :

Steel

Bricks

Extra rate for OPC

Carriage of Materials :

Bajri :

Coarse sand :

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

RUIDP- ISOR 2023

300mm dia

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (3) (ii): CSR + Non CSR Amount : ( Rs)

Panel Room for Intake Pumping Station

1. Capital Works CSR based Items

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Cement concrete 1:4:8

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

12.5 mm thick cement plaster 1:4

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

40 mm.Thick Grey Polished Floor :

50 mm thick ironite ( Metallic Floor Hardner to be mixed with Granolithic topping for heavy duty floors) floor consisiting of 40mm thick cement concrete 1:2:4 base and top layer 10mm thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6mm gauge by volume finished smooth with hard rubbing

Conglomerate floor 50mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Floating Coat :

Floating coat of 1.5 mm thick neat cement laid in one operation to the topping.

Terracing :

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Rain water pipe :

Providing and fixing 110 mm. dia. U.P.V.C Rain water pipe of 2.5 kgf / sqm as per IS : 4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in-charge.(If fixed on wall face clamp to be paid separatly as per respective item)

Top Khurra :

Top Khurra 0.6 m.x 0.6 m. for rain water pipe in 25 mm. thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Upvc Bend :

Providing and fixing 110 mm. dia. U.P.V.C bend for Rain water pipe as per IS : 14735 including jointing complete as per specifications and to the entire satisfaction of Engineer-in-charge.

Upvc Coupling/socket :

Providing and fixing 110 mm. dia. U.P.V.C Coupling / Socket for Rain water pipe as per IS : 14735 including jointing complete as per specifications and to the entire satisfaction of Engineer-in-charge.

Door & Windows

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding, placing in position complete.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering )

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc

Distemper :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Rolling Shutter :

Diff.in Rates of materials :

Bajri :

Coarse sand :

Bricks :

Steel

Extra rate for OPC

Carriage of Materials :

Bajri :

Coarse sand :

Fine Sand : From 60 km.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (3) (iii): CSR Amount after adding 5.35% : (Rs)

Raw Water Sump, Pumping Machinery and Panel Room at WTP

1. Capital Works CSR based Items

Raw Water Sump and Pumping Machinery Room (BGL)

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

M-30 : Plinth level

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering :

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( Walls)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Walls)

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering : (Slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer in charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Panel Room (Above GL)

Brick masonary work (1:5) :

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.

Brick masonary work (1:5) : > 4.0 m.

Brick masonary work (1:5) : 4.0 - 6.0 m

Cement concrete 1:2:4

CC 1:4:8 : ( Below Ironite flooring)

Cement concrete 1:4:8

Damp proof course 4 cm. thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm.laid hot and sanded.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixture as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in superstructure.

Extra height Concrete :

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Above 4.0 m.height :

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

C/shuttering :

Centering and Shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C/shuttering : ( Lintels)

Centering and Shuttering for sides and soffits of beam,beams,launchings,girders,bressumers,lintels.

CP 12.5 mm.thk. : (1:4)

12.5 mm.thick cement plaster 1:4.

CP 12.5 mm.thk. : (1:2)

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Preparation of plastered surface :

Prepartion of plastered surfaces for distempering including surface,applying filling with approved quality filler consisting of plaster o Paris and chalk mitti,including finishing the surface to the required finish complete.

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Oil Bound Distemper :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade.

Earth filling under floors :

Ironite flooring:

50 mm.thick ironite ( Metallic floor hardner to be mixed with Granolithic topping for heavy duty floors ) floor consisting of 40 mm.thick cement concrete 1:2:4 base and top layer 10 mm. thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6 mm gauge by volume finished smooth with hard rubbing.

Steel windows and ventilators :

Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.

Fixing steel windows in walls with lugs,embedded in 15 cm x 12 cm x 7.5 cm. of cement concrete block of 1:2:4 mix,including,cost of cement concrete for lugs.

Glass panes :

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Rolling Shutter :

Parapet Wall :

115 mm. thick brick wall laid in cement sand mortar 1:4 without reinforcement in superstructure.

CC 1:2:4 : ( coping )

Cement concrete 1:2:4

Cement Concrete 1:2:4 gola :

Cement concrete 1:2:4 gola 10 cm.x 10 cm. concave quadrant along junction of roofs with parapet wall finished smooth,where specially specified.

Top Khurra :

Top khurra 0.6 m. x 0.6 m. for rain water pipe in 25 mm.thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Bottom Khurra :

Bottom Khurra on ground 1.2 m x 0.6 m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm.cement concrete 1:8:16, including 12.5 mm. thick cement plaster 1:3

Drip Course :

Providing 75 mm.first class brick drip course at junction of roof and walls laid in cement sand mortar 1:4 including dressing of bricks.

Dry Brick edge paving :

Dry brick on edge paving sand grouted over 50 mm. thick earth and mud plaster.

CI Rain water pipes :

Providing and fixing cast iron 100 mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc.

CI head :

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall-face including filling the joints with spun yarn and cement mortar 1:2.

CI shoes :

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.

Embedding of CI Rain water pipes :

Embedding 100 mm.C.I.rain water pipe non-pressure I.S.I. Mark pipe in cement mortar during masonary work.

Store Room Below GL

Excavation :

Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Brick masonary work in cm 1:5 :

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

Bricks

Steel

Extra for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Fine Sand 60 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (4) : CSR Amount after adding 5.35% : (Rs)

Water Treatment Plant 4.0 MLD Capacity (22 Hrs @181.67 KLH)

Water Treatment Plant 4.0 MLD Capacity

13.2.1 PHED, Raj. BSR (2023-24)

Sub-Total Part - A (5) : NON CSR Amount : (Rs)

CWR- Mixing Chamber

1. Capital Works CSR based Items

Excavation : (Mech.)

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

M-30 : Plinth level > 4.0 m

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( walls)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering : ( slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Difference in rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (6) (i): CSR + Non CSR Amount : ( Rs)

Inlet Valve Chamber to CWR

1. Capital Works CSR based Items

Earthwork in excavation : (Mechanically)

Earthwork in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator, JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering, dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Admixture :

Extra for using admixture in designed mix concrete

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

Providing,Stringingout, cutting, Jointingand testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329 2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

Pre Cast Slab Cover :

(Rate Analysis Attached)

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, includingjointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge).

GI Pipe : (Rising Pipe for Valve Operation)

Providing, laying, jointing, fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials (such as tees, bends, sockets, elbows, etc.) painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

Diff. rates of materials :

Bajri :

Coarse sand :

Steel

Extra for OPC

Carriage of materials :

Bajri :

Coarse sand :

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (6) (ii): CSR Amount after adding 5.35% : (Rs)

Chlorine Contact Tank

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plain)

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Beam )

Centering and shuttering for sides and soffits of beam,beams,launching girders,bressumers,lintels.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Slab )

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

Pre Cast Slab Cover over Chamber :

Providing & Laying of Pre Cast Slab Cover size 1.0m x 0.3m x 0.125m cover Chamber complete in all respect and as per direction of Engineer in- Charge.

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (6) (iii): CSR + Non CSR Amount : ( Rs)

Clear Water Reservoir (CWR)

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Brick Masonary Work :

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 meters above plinth level.

Steel Chowkats :

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

SS Handles :

Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer in charge.

SS Tower Bolts :

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer in charge.

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plain)

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Beam )

Centering and shuttering for sides and soffits of beam,beams,launching girders,bressumers,lintels.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Slab )

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

Staircase Railing :

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Diff.Rates :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Bathinda

Steel

Extra for OPC

Carriage :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Fine sand

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Steel Doors :

NS RUIDP SOR 2023 / Code no. 29.12

Steel beading :

NS RUIDP SOR 2023 / Code no. 29.13

CI Ventilator Cowl :

Chhattisgarh CSR June 2020 Item no.26.3

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (7) (i): CSR + Non CSR Amount : ( Rs)

CWR- Pumping Station & Panel Room

1. Capital Works CSR based Items

Panel and Meter Room Combined (Above GL)

Brick masonary work (1:5) : ( up to 4.0 m.height)

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Cement concrete 1:2:4

Damp proof course 4 cm. thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm.laid hot and sanded.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixture as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in superstructure.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixture as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in superstructure.

Extra height Concrete :

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

C/shuttering :

Centering and Shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc. :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height :

C/shuttering : ( Lintels)

Centering and Shuttering for sides and soffits of beam,beams,launchings,girders,bressumers,lintels.

CP 12.5 mm.thk. : (1:4)

12.5 mm.thick cement plaster 1:4.

CP 12.5 mm.thk. : (1:2)

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Preparation of plastered surface :

Prepartion of plastered surfaces for distempering including surface,applying filling with approved quality filler consisting of plaster o Paris and chalk mitti,including finishing the surface to the required finish complete.

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Oil Bound Distemper :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade.

Earth filling under floors :

Ironite flooring:

50 mm.thick ironite ( Metallic floor hardner to be mixed with Granolithic topping for heavy duty floors ) floor consisting of 40 mm.thick cement concrete 1:2:4 base and top layer 10 mm. thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6 mm gauge by volume finished smooth with hard rubbing.

Steel windows and ventilators :

Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.

Fixing :

Fixing steel windows in walls with lugs,embedded in 15 cm x 12 cm x 7.5 cm. of cement concrete block of 1:2:4 mix,including,cost of cement concrete for lugs.

Glass panes :

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Doors Shutter :

Aluminium Fittings :

Cost of Aluminium fittings complete for doors,windows such as tower bolts,handles,Stoppers and screw etc.for these fittings.(Excluding sliding bolt)

Steel Chowkats :

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

Rolling Shutter :

Parapet Wall :

115 mm. thick brick wall laid in cement sand mortar 1:4 without reinforcement in superstructure.

CC 1:2:4 : ( coping )

Cement concrete 1:2:4

Cement Concrete 1:2:4 gola :

Cement concrete 1:2:4 gola 10 cm.x 10 cm. concave quadrant along junction of roofs with parapet wall finished smooth,where specially specified.

Top Khurra :

Top khurra 0.6 m. x 0.6 m. for rain water pipe in 25 mm.thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Bottom Khurra :

Bottom Khurra on ground 1.2 m x 0.6 m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm.cement concrete 1:8:16, including 12.5 mm. thick cement plaster 1:3

Drip Course :

Providing 75 mm.first class brick drip course at junction of roof and walls laid in cement sand mortar 1:4 including dressing of bricks.

Dry Brick edge paving :

Dry brick on edge paving sand grouted over 50 mm. thick earth and mud plaster.

CI Rain water pipes :

Providing and fixing cast iron 100 mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc.

CI head :

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall-face including filling the joints with spun yarn and cement mortar 1:2.

CI shoes :

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.

Embedding of CI Rain water pipes :

Embedding 100 mm.C.I.rain water pipe non-pressure I.S.I. Mark pipe in cement mortar during masonary work.

Panel Room above GL

Excavation :

Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around

Cement concrete 1:2:4

M-30 : Plinth level

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Brick masonary work in cm 1:5 : (plinth level)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Difference Rates :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks : ( / 1000 nos)

From Bathinda

Steel

Extra for OPC

Carriage of Materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (7) (ii): CSR Amount after adding 5.35% : (Rs)

Clear Water Rising Main Pipeline

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Air Valve

NS Based on PHED Rajasthan 2023 Code no.6.6

Class PN 1.0

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (8) : CSR + Non CSR Amount : ( Rs)

Pipeline works at WTP Premises

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipe :

Pipe lines laid complete.

uPVC Pipe :

Providing and laying,jointing,fixing and testing ISI Marked uPVC Pipe lines as per ISI -4985 -2000, including specials such as tees,bends,sockets,elbow etc.cutting,testing ( including cost of specials ),in the ground complete in all respects.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

Jointing of DI pipes : ( for specials)

Jointing of D.I.Pipe and Specials with rubber tyton joints fitted complete excluding the cost of rubber gasket including testing etc.complete in all respect. (Note : This Item will be paid as per site requirement.)

CI Surface Boxes :

Providing ,fixing and jointing CI surface boxes for sluice valve,Air valve,Fire hydrant etc.including all carriages complete.

CI Surface Box : @ 33kg./box & For Fire Hydrant :131 kg/Box

C.I.Indicating Plates :

Providing & Fixing C.I. indicating plates of size 100 mm.x 100 mm.for SV/FH including synthetic enamel paint & letters in white enamel paint fixing in the ground with angle iron of size 25 x 25 x 5 mm.,230 mm.height from ground including concrete block complete in all respect as directed by Engineer-in-charge.

Valve chambers :

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Bathinda

Steel

Extra for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Fine Sand 60 km

Bailing out of water :

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (9): CSR Amount after adding 5.35% : (Rs)

Boundary wall at WTP

1. Capital Works CSR based Items

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Cement concrete 1:2:4

Reeinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering )

C / shuttering : ( Columns)

Centering and Shuttering for columns ( square or rectangular or poly gonal in plan)

C / shuttering : ( Beams)

Centering and Shuttering for columns ( square or rectangular or poly gonal in plan)

115 mm.thk.BBM :

115 mm. thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure.

CP 20 mm.thk. :

20 mm.thick cement plaster 1;4 in two coat work

White wash :

White washing ( Three coat)

Dry distemper :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

Sliding Shutters :

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete.

Diff.in rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Bathinda

Steel

Extra for OPC

Carriage of materials :

Bajri :

From Mirthal 219 km

Coarse sand :

From Lohand Khad 216 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Barbed wire fencing :

1.2 Meter High G.I.Barbed Wire fencing

(Rate analysis based on CSR item no.24.43 )

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (10) : CSR + Non CSR Amount : ( Rs)

Dismantling of Existing Structures Filter beds (04 Nos.), HLT tanks (02 Nos.), Clear Water tanks (02 Nos.), Pump House (01 No.), Staff Quarter (01 No.) and Storage & Sedimentation Tanks (01 No.)

1. Capital Works CSR based Items

Dismantling of pre-stressed / RCC including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 mtr (By Mechanical Means)

Brick work :

Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means)

Steel work :

Removing R S beams from structures or trusses

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Doors and Windows :

Dismantling aluminium/ Gypsum partitions,doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Wire gauge doors :

Dismantling wire gauge with frame work including seperating frame work and putting wire gauge into rools.

Conglomerate floor ;

Dismantling cement congomerate floors 25 mm to 50 mm including concrete base.

Terracing ;

Scraping :

Dismantling roofing:

Credit of old/unserviceable material

Bricks :

Brick Bats :

Brick tile

Recovery of Stone Aggregate 80% of total cum

Recovery of steel Fe 500

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (11): CSR Amount after adding 5.35% : (Rs)

Re-Development of Existing SS Tank

1. Capital Works CSR based Items

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon, Trucks or boats within 15 meters lead.

Carriage of Earth : (Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

Cement concrete 1:4:8

LDPE Sheet

AOR Based CSR

Cement concrete 1:2:4

Diff.in rates of materials :

Bajri :

Coarse sand :

Bricks :

Extra for OPC

Carriage of materials :

Bajri :

Coarse sand :

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

DSR V-I 2.31

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (12) : CSR + Non CSR Amount : ( Rs)

Earth Filling Work in WTP Area

1. Capital Works CSR based Items

Compensation & Royalty

Extra For compensation & royalty for Ordinary earth/ Ordinary clay taken from private land.

Compaction

Carriage of Good Earth

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (13): CSR Amount after adding 5.35% : (Rs)

Intake

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

SS Manual Coarse Bar Screen ( 1.0 X 4.0 ) M

Amount Per One

Sub-Total Part - B (14) : NON CSR Amount in Rs.

Intake Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 156 Cum/hr and head 12 mtr

DI flanged Pipe

RUIDP 2023,19.13

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

250 mm dia

RUIDP SOR 2023,18.9

3 MT Capacity (Span 7 M and Lift 6 M)

SS Manual Coarse Bar Screen ( 1.0 X 6.0 ) M

Amount Per One

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 1.6

250 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Rubber expansion bellows

200 mm dia PN 16

Puddle collar

RUIDP SOR 2023,19.63

250 mm dia

TELANGANA SoR 2023-24

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (15) : NON CSR + CSR Amount after adding 5.35% in Rs.

Raw Water Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 156 Cum/hr and head 14 mtr

DI flanged Pipe

RUIDP 2023,19.13

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

300mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

250 mm dia

300 mm dia

RUIDP 2023,18.9

3 MT Capacity (Span 7 M and Lift 6 M)

Puddle collar

RUIDP 2023,19.63

250 mm dia

300 mm dia

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 1.6

300 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Floating Arm

Floating suction assly.(Floating arms) Dia- 250 mm, Metarial SS 304

Rubber expansion bellows

200 mm dia PN 16

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (16) : NON CSR + CSR Amount after adding 5.35% in Rs.

Dewatering Pumps

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Non -Clog Submersible pump

(RUIDP 2023,18.1)

Discharge 42 Cum/hr and head 10 mtr

Dismantling joint

(RUIDP 2023,19.56)

150 mm dia

Lifting arrangement for pumps

(RUIDP 2023,18.10)

2 MT Capacity

Non CSR ITEMS AMOUNT (RS)

DI flanged Pipe

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

Lifting arrangement for pumps

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (17) : NON CSR + CSR Amount after adding 5.35% in Rs.

Clear Water Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 150 Cum/hr and head 43 mtr

DI flanged Pipe

RUIDP 2023,19.13

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

250 mm dia

RUIDP 2023,18.9

3 MT Capacity (Span 7 M and Lift 6 M)

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 16

250 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Rubber expansion bellows

200 mm dia PN 16

Puddle collar

RUIDP 2023,19.63

250 mm dia

TELANGANA SoR 2023-24

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

Providing and laying,jointing,fixing,testing ISI Marked G.I.Pipe ( as per IS : 1239) B-Class premium make such as (approved make) including cost of specials such as tees,bends,sockets,elbow etc.cutting,threading and testing in trenches in the ground complete.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (18) : NON CSR + CSR Amount after adding 5.35% in Rs.

Sluice Gate

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

RUIDP 2023,18.7

Up to 5 MLD

Sub-Total Part - B (19) : NON CSR Amount in Rs.

Electrical, Instrumentation & RTU Works for Intake Pump House, Water Suppy- Bhagta Bhai Ka

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES :

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:

Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

Capital Works 'CSR based Electrical, Instrumentation & RTU Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2.Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 60.4

2.5 Sq. mm (Ref: 60.4.2)

3 core (Ref: 60.4.2.2)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

RUIDP ISOR 2023, 66.4

Surface Mounting (Ref: 66.4.2)

Minimum lumen output 4200 lm (Ref: 66.4.2.3)

RUIDP ISOR 2023, 64.12

380 mm sweep(900/1400 RPM) (Ref: 64.12.2)

RUIDP ISOR 2023, 64.11

225 mm sweep (Ref: 64.11.1)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 43.28

250 mm (Ref; 43.28.13)

RUIDP ISOR 2023, 47.1

Control Indication Lamp for 24VDC, 220VAC No. 3 Push Button No. 3 Power Wiring+Control Wiring + Control TB/ Fuse 2A,TB etc Lot 1Panel Hardware, lugs, terminations, ferrules, name plate Etc. Lot 1UTILITY SOCKET 16A, 3 PIN No. 2 HMI Display 10 Inch, Colour No. 1 Isolators Dual Output, 24VDC Lot 1

RUIDP ISOR 2023, 73.41

RUIDP ISOR 2022, E111500

1.5 sq.mm (Ref; E111540)

1 pair (Ref; E111540A)

RUIDP ISOR 2022, E111400

1.5 sq.mm (Ref; E111440)

6 core (Ref; E111440E)

Capital Works 'Non CSR based Electrical, Instrumentation & RTU Items (In Rs)

Total : Part - C - 20 (Electrical, Instrumentation & RTU) CSR + Non CSR Amount : (Rs)

Electrical, Instrumentation & PLC Works for Raw & Clear Water Pump House, Water Suppy- Bhagta Bhai Ka

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

(xxvii)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

(xxvii)

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES :

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:

Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

Capital Works 'CSR based Electrical, Instrumentation & PLC Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2.Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 44.6

30 KW (Ref: 44.6.2)

RUIDP ISOR 2023, 60.4

2.5 Sq. mm (Ref: 60.4.2)

3 core (Ref: 60.4.2.2)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

RUIDP ISOR 2023, 66.4

Surface Mounting (Ref: 66.4.2)

Minimum lumen output 4200 lm (Ref: 66.4.2.3)

RUIDP ISOR 2023, 64.12

380 mm sweep(900/1400 RPM) (Ref: 64.12.2)

RUIDP ISOR 2023, 64.11

225 mm sweep (Ref: 64.11.1)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 43.27

0 to 6 Mtr. (Ref; 43.27.1)

RUIDP ISOR 2023, 43.28

250 mm (Ref; 43.28.13)

RUIDP ISOR 2023, 47.2

Control Indication Lamp for 24VDC, 220VAC No. 3 Push Button No. 3 Power Wiring+Control Wiring + Control TB/ Fuse 2A,TB etc Lot 1 Panel Hardware, lugs, terminations, ferrules, name plate Etc. Lot 1 UTILITY SOCKET 16A, 3 PIN No. 2 HMI Display 10 Inch, Colour No. 1 Isolators Dual Output, 24VDC Lot 1

RUIDP ISOR 2023, 73.41

RUIDP ISOR 2022, E111500

1.5 sq.mm (Ref; E111540)

1 pair (Ref; E111540A)

RUIDP ISOR 2022, E111400

1.5 sq.mm (Ref; E111440)

6 core (Ref; E111440E)

Capital Works 'Non CSR based Electrical, Instrumentation & PLC Items (In Rs)

Total : Part - C - 21 (Electrical, Instrumentation & RTU) CSR + Non CSR Amount : (Rs)

Electrical Works for Sub-Station, Water Suppy- Bhagta Bhai Ka

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

XLPE INSULATED HT CABLES:

Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

(xxxvii)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

(xxxvii)

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Capital Works 'CSR based Electrical Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2.Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 72.4

RUIDP ISOR 2023, 68.20

RUIDP ISOR 2023, 72.7

RUIDP ISOR 2023, 72.7.2

RUIDP ISOR 2023, 72.7.3

RUIDP ISOR 2023, 72.2

100 KVA (Ref: 72.2.2)

160 KVA (Ref: 72.2.3)

RUIDP ISOR 2023, 72.31

CPCB-IV complianced 25 kVA DG Set (Ref: 72.31.3)

RUIDP ISOR 2023, 72.29

20 to 40 KVA (Ref: 72.29.1)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

50mm x 6mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.17)

RUIDP ISOR 2023, 67.7

20.0 Mtr Hm (in 2 section) suitable for 12 No. Luminaries (Ref; 67.7.3)

RUIDP ISOR 2023, 67.11

High Power LED Flood Light Minimum lumen output 37500 lm (Ref; 67.11.11)

Capital Works 'Non CSR based Electrical Items (In Rs)

Sub-Total Part - C- 22 (Electrical, Instrumentation & RTU) CSR + Non CSR Amount : (Rs)

SCADA for Intake, Raw & Clear water Pumping Station, WTP & Sub-Station- Bhagta Bhai Ka

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 47.14

Capital Works 'Non CSR based SCADA Items (In Rs)

Sub-Total Part - C- 23 (Electrical, Instrumentation & RTU) Non CSR Amount : (Rs)

05 years’ Operation and Maintenance

1st Year.

2nd Year.

3rd Year.

4th Year.

5th Year.

Total (PART - D) 05 Years' O&M in Rs.