CERTAIN REPAIR/MAINT OF MISC FURNITURE ITEMS AT BSO SUB DIVN AND MIL STN NOWGONG (BKD) UNDER GE JHANSI

Amount

Recanning of all type chairs (FD-279, 280, 229, 70, 244, 204, 357, 258, 47, 75, 30)

M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawing and as directed. Note - Chair dinning 0.39x0.39=0.1521, Chair writtiing-0.43x0.47=0.2021, Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321

Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed.

M&L for polishing of chair dinning with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.

M&L for polishing of chair writting with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and as directed.

M&L for polishing of chair easy with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and as directed.

Charpoy GI pipe with nylon Newar (FD-220) M&L for replacement of following parts of Charpoy GI pipe with nylon newar all as specified and shown on drawings. Fixing and finishing shall be done in accordance with standard workmanship/specifications as shown on drawing and as directed.

Removal of old/unserviceable nylon newar fron existing Charpoy GI Pipe , re-assembling/ tightening the frame and supply & fixing of new ply top of size 6' to 6.12' x 3' x12mm thick , MR grade , ISI marked (Make : Kitply/National/ Greenply) with two stiffnerof GI pipe 25 mm bore of med grade to be welded for joint with both long rail with round headed steel nut, bolt and washer fourteen (14) nos in each charpoy through suitable drill machine holes of appropriate size complete all as specified and directed.

Re-threading of broken end of long rail/short rail/legs of charpoy upto 22 mm and refixing the same complete all as shown on drawing and as directed.

Taking out old unserviceable and broken existing elbow 3 way from the charpoy and S&F new three way elbow of 32 mm bore dia, medium weight, ISI Marked complete all as shown on drawing and as directed.

Taking out old unserviceable and broken existing check nuts from the charpoys and S&F new checknuts of 32 mm bore and 6mm thick , medium weight, complete all as shown on drawing and as directed.

Round bottom disc shall be provided to each legs fietted under item No.3 (b) here in beforewith 50 mm dia MS sheet 3 mm thick welding shall be done around complete all as shown on drawing and as directed.

Chair Computer/Chair Visitor (FD/E6/MAP/01,TP)

Removing old/ unserviceable twin wheel castor from chair and S&F new twin wheel caster as per shape and size complete all as specified and directed

Removing old /unserviceable seat and S & F new seat of PU foam 40 density upholstered with tepestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thickcommercial ply BWR grade complete all as shown on drawing and as directed.

Removing old /unserviceable back and S & F newback of PU foam 40 density upholstered with tepestry cloth (range not less then Rs 350/Mtr fixed on 12 mm thickcommercial ply BWR grade complete all as shown on drawing and as directed.

Removing old/unserviceable pedestal assy and S&F new pedestal assy as per shape and size complete all as specified and directed

Removing old/unserviceable hydraulic systern and S&F new hydraulic systerm with gas presure300n force & 100 mm strock lenth all as per shape and size complete all as specified and directed

Removing old/unserviceable arms and S&F new arms of polyurathane all as per shape and size shown on drawing and as directed.

Table 900X900mm Steel (FD-1009)

Removing old/unserviceable top from table and S&F new top of size 900x900 & 18 mm thick of prelaminated partical board exterior grade type -II melamine face as per IS-3087 top of teack face and white laminated on other side with 4 mmthick Ist class hard wood(teak wood) beading fixed with nails including french polishing to beading complete all as specified and directed.

Painting to table 3'x3' with one coat of synthetic enamel paint of Ist quality including preparation of old surface complete all as specified and directed.

Chair Writing Steel (FD/E6/MAP/12)

Removing old/unserviceable Seat and S&F new seat of PU foam 40 density upholstery with tapestry cloth (range not less than Rs 302 per mtr)fixed on 12 mm thick commercial ply BWR grade complete all as specified and directed

Removing old unserviceable back andS&F new backof PU foam 40 denesity upholstered with tapestry cloth ( range not less than Rs 302 per mtr) fixed on 12 mm thick commercial ply BWR grade complete all as shown on drawing and as directed.

Removing old unserviceable arms and S&F new arms of polyurathane all as per shape and size shown on drawing and as directed.

S&F rubber stoper of chair writing all as per shape and size shown on drawing.

Painting the chair writing steel frame with one coat of black synthetic enamel paint of ist quality including preparation of old surface complete all as specified and directed.

M&L for welding point up to 20 mm runing of brocken all type steel furniture with gas/electric welding. The welded portion shall be paintedwith synthetic enamel paint over a coat of redoxide primer to be matched with existing paint i.e white/ black/ OG complete all as specified and directed.

Chair school with hand board (FD/E6/MAP/05)

Removing of old unserviceable top of hand rest and S&F new top shall be of 18 mm thick prelaminated melamine faced partical board both side decorative fitted with PVC edging all round (Hinges on right hand side) screwed to 25 mm hollow pipe all as per arrangement shown in drawing and directed.

Removing old unserviceable seat & back and S&F new seat and back shall be in one piece of PVC as per arrangement shown in drawing and complete all as shown in drawing and as directed.

Painting the chair school with hand board frame with one coat of black synthetic enamel paint of Ist quality including preparation of old surface complete all as specified and directed.

Table Office Officer/Clk Steel (FD-1004/ FD-1003)

Removing old/ unserviceable top fram table office officer steel and S&F new top of prelaminated partical board melemine faced one side decorative 18 mm thick as per shape and size shown on drawing with 4 mm thick teak wood beading fixed with nails including french polishing to beading complete all as specified and directed.

Removing old/unserviceable top from table office clk steel and S&F new top of prelaminated partcal board melamine faced one side decorative 18 mm thick as per shape and size shown in drawing with 4 mm thick teak wood beading fixedwith nailsincluding french polishing to beading complete all as specified and directed.

Removing old/unserviceable drawer and drawer box from table officeclk/Officer steel and S&F new drawer and drawer box made of 1 mm thicksheet as per shape and size of the existing table and welding whereever required and painting of table with synthetic enamel paints olive green complete all as specified and directed

Removing old/unserviceable legs from table office clk/ Officers steel and S&F new legs made of 25 mm squire pipe 1.6 mm thick as per shape and size of the exsiting table and welding where ever required and painting of table with synthetickenamel paint olive green complete all as specified and directed

Removing old/unserviceable Rises handle from table office clk/ officers steel and S&F new rises handle as per shape and size shown on drawing.

Removing old/unserviceable locks of table office clk/ officers steel and S&F new locks with two keys as per shape and size complete all as specified and directed.

Painting of Table office clk steel Preparation of suface I,e filling all holes and cracks or detoriated spots of old painted steel furniture with primer ( Internally/ Externally) putty than applying spray painting of synthetic enameled paint of Ist grade , shade smock grey/ olive green as approved by GE, complete all as specified & directed.

Painting of Table office officer steel Preparation of suface I,e filling all holes and cracks or detoriated spots of old painted steel furniture with primer ( Internally/ Externally) putty than applying spray painting of synthetic enameled paint of Ist grade , shade smock grey/ olive green as approved by GE, complete all as specified & directed.

Sofa set 4/5 seater (FD-281/373, FD/Map-II/02)

Removing of old cushion of size 21 x 22 inchs & 4 inchs thick from sofa set and replacing foam cushion of sofa set five seater with new PU foam cushion of 32 density (make: Sleepwell/Kurlon and cushion shall be covered with cotton tapesty cloth of range not less than Rs.350.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed .

Preparation of surfaces of sofa set 5 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

Preparation of surfaces of sofa set 4 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed.

Minor repairing of various sofa set 4/5 seater including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed.

Bed Hard ply top/Bed Newar (FD-245 & 246)

Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .

Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .

Taking down the existing broken unserviceable side long rail from Bed Hard/Bed Niwar and S & F new side long rail of teak wood (Ist class) mm including french polishing with high class finish complete all as specified in drawings & directed .

Taking down existing unserviceable ply top/newar from the Bed Hard/bed newar and S&F new ply top 12 mm thick,MR grade complete all as specified in drawings & directed .

Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed.

S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed.

Preparation of surfaces of Bed hard/Bed newar by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

Chair varandah (FD-359,256,333)

M&L for recanning of seat & back of chair verandah steel with white plastic cane, 4 mm wide and 0.5 mm thick, weighing not less than 450 Grams per chair (+/-5%)(Plastic cane shall be of Make: Premier or equivalent) with and including 4 Nos. hard rubber shoe shall also be provided to the legs of chair and painting the steel chair verandah frame with one coat of white synthetic enamel paint of Ist quality complete all as specified in drawings & directed .

Bed Hard (MAP) (FD/E6/MAP/08 R)

Removing of old unserviceable prelaminated particle board of Head board and S & F new prelaminated particle board of Head board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.

Removing of old unserviceable prelaminated particle board of foot board and S & F new prelaminated particle board of foot board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.

Taking down existing unserviceable ply top from the Bed Hard and S&F new ply top 12 mm thick MR grade fitted with steel screw complete all as specified in drawings & directed .

S&F cap all as per shape and size complete all as specified in drawings & directed .

Painting to Bed hard with one coat of black synthetic enamel paint of Ist quality including preparation of old surface complete all as specified in drawings & directed .

Chair dining MAP (FD/E6/MaP/10)

Removing old broken/unserviceable front legs from chair dining and S&F new front legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable rear legs from chair dining and S&F new rear legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable side rail from chair dining and S&F new side rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable front rail from chair dining and S&F new front rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable back rest from chair dining and S&F new back rest of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable centre stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable side stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.

S&F wooden braket 8 Nos in each between each corners fixing with suitable screws all as specified in drawings & directed .

Removing old unserviceable foam from chair dining and replacing from 75 mm thick ,32 density with new PU foam of make: Sleepwell/coir foam from seat of chair dining and foam shall be covered with cotton tapesty cloth of range not less than Rs.302.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified and directed.

M&L for polishing all repaired chairs with high class french/ sprit polish till glossy finish is obtained complete all as specified and directed.

Table writing (FD-275,249)

Removing old unserviceable top from table writing and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade typr -II melamine face as per IS-3087, top of teack face and white laminated on other side with 4 mm thickIst class hard wood(teak wood) beading fixed with nailsincluding frenchpolishing to beading complete all as specified and directed.

Removing old broken /unserviceable side short rail of table writing and S&F new side short/ long rail made of Ist class hard wood(teak wood)as per shape and size shwon in drawing including french polishing to match the other parts complete all asspecified and directed.

Removing old broken /unserviceable side long rail of table writing and S&F new side short/long rail made of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable legs from table writing and S&F new legs made of Ist class hard wood wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing includings french polishing to match other parts complete all asspecified and directed.

S&F wooden bracket 8 nos in each table writing between each corners fixing with suitable screw all as specified in drawing & directed.

Removing old broken / unserviceable back ply of box from table writing and S&F new back ply made of 6 mm thick commercial ply wood as per shape and size shown in drawing including french polishing to match other parts complete all as specified and directed.

Removing old broken / unserviceable shuter of box from table writing and S&F new shuter made of 18 mm thick prelaminated pertical board including one nos magnetic catchter & handle in each shuter all as per shape and size shown in drawing.

Removing old broken/unserviceable drawer from table writing and S&F new drawer made of as specified in drawing including one nos handle in each drawer all as per shape and size shown in drawing includings french polishing to match other parts complete all as specified and directed.

Removing old broken /unserviceable centre stiffener from table writing and S&F new centre stiffener made of Ist class teak woodall as specified in drawing includings one nos handlein each drawer all as per shape and size shown in drawing includings french polishing to matchother parts complete all as specified and directed.

Removing old broken/ unserviceable side stiffener from table writing and S&F new side stiffener made of Ist class teak wood all as specified in drawings includings french polishings to match other parts complete all as specified and directed.

Preparation of surface of table writing by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprit polishing on exposed surface to achive high class finish complete all as directed.

Table Dressing Ladies with Mirror (FD-378 & 251)

Removing of old broken/unserviceable looking mirror with frame from the table dressing ladies and S&F new 5 mm thick looking mirror with frame as per sample shape and size shown in drawing of Make - Atul/Modi Complete all as specified and directed

Removing old broken / unserviceable knob from table dressing ladies and S7F new 40 mm size CP brass knob as per sample , shape and size shown in drawing complete all as specified and directed.

Removing old broken/ unserviceable sliding glass from table dressing ladies and S&F new 5 mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing old broken legs from table dressing ladies and S&F new legs of Ist class hard wood(teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete all as specified and directed.

Removing old broken/ unserviceable sunmica from the top of table dressing ladies and S&F new 0.8 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/ unserviceable back side of table dressing ladies and S&F new back side as per shape and size shown in drawing complete all as specified and directed

Removing old broken/ unserviceable drawer from the table dressing ladies and S&F new drawer including PVC knob as per shape and size shown in drawing complete all as specified and directed.

Preparation of surface of table dressing ladies by applying one sealer coat and making the surface plain by scraping with fine sand paperand polishing two coat of french/ sprit polish on exposed surface th achive high class finish, complete all as specified and directed.

Side Board (FD-372,371,241)

Takig down the old broken/ unserviceable top from side board and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type -II complete all as specified and directed.

Removing old broken / unserviceable side of side board and S&F new side of Ist class hard wood (teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete complete all as specified and directed.

Removing old broken/ unserviceable back of side board and S&F new back as per shape and size shown in drawing of 6 mm thick commercial ply including french polishing to match the other parts complete all as specified and directed.

Removing old broken/ unserviceable door of side board and S&F new door of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts with piono type hinges complete all as specified and directed.

Removing old broken/ unserviceable drawer of side board and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed

Removing old broken/ unserviceable aluminium handle from the side board and S&F new alumunium handle as per sample, shape and size shown in drawing complete all as specified and directed

Preparation of surface of side board by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprite polish on exposed surface to achive high class finish complete all as specified and directed.

Table Dining 6 Pers (FD- 273)

Removing of old unserviceable top from table dining 6 pers and S&F new top of size 1500 x 900 mm of 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawing and as directed.

Removing of old broken/unserviceable side short rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.

Removing of old broken/unserviceable side long rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.

Removing old broken/unserviceable legs from table dining 6 pers and S&F new legs made of Ist class hard wood (teak wood) including 04 Nos PVC Shoes as per shape and size shown in drawing including french polishing to match other parts complete all as specified in drawing and directed.

S&F wooden braket 8 Nos in each table dining between each corners fixing with suitable screws all as specified in drawings & directed .

Preparation of surfaces of table dining 6 person by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

Table Peg (450 x 300 mm) (FD-277,384,236)

Removing old unserviceable top from table peg and S&F new top of size 450 x 300 mm & 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .

Removing old broken/unserviceable side short rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable side long rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable legs of table peg and S&F new legs including 04 Nos PVC shoes of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed.

S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .

Preparation of surfaces of Table peg by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

Teapoy (600 x 450 mm) (FD-278,232, 382)

Removing old unserviceable top from teapoy and S&F new top of size 600 x 450 mm of 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .

Removing old broken/unserviceable side short rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable side long rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable legs from teapoy and S&F new legs of Ist class hard wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .

Removing old broken/unserviceable centre stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable side stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Preparation of surfaces of Teapoy by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

Table 3' x 2' with or without drawer (FD-42, 55 & 283,284)

Removing old unserviceable top from table and S&F new top of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawings & directed .

Removing old broken/unserviceable side short rail of table and S&F new side short rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable side long rail of table and S&F new side long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable legs from table and S&F new legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed.

Removing old broken/unserviceable drawer from table and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed.

S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .

Removing old broken/unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .

Removing old broken/unserviceable side stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed.

Preparation of surfaces of Table 3'x2' with drawer by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed.

Preparation of surfaces of Table 3'x2' w/o drawer by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .

TV Trolly (FD/E6/MAP/04)

Taking down existing unserviceable top[ from TV Trolly and S&F new top shall be off 18 mm thick prelaminated partical board edge moulded all around fixed to frame all shown in drawing and as directed.

Taking down existing unserviceable side frame TV trolly and S&F new shall be 18 mm thick prelaminated partical board all as shown in drawing and as directed

Removing old unserviceable castor from TV trolly and S&F new sweble type castor as per shape and size complete all as specified and directed

Taking down existing unserviceable /brocken shutter glass from TV trolly and S&Fnew shutter glass with 5 mm thick duly revitted to clamp with steel revit with magnetic catcher fixed to frame complete all as shown on drawing and as directed

Teapoy Varandah (FD-255)

Taking down existing unserviceable top from top from teapoy varandah and S&F new top of teapoy shall be of 18 mm thick prelaminated partical board both side decorative fitted with PVC eadging all -around fixed th frame all as shown on drawing and as directed

S&F cap all as per shape and size shown on drawing & as directed

Painting to teapoy varandah with one coat of white synthetic enamell paint of Ist quality including preparation of old surface complete all as specified and directed

Teapoy Varandah Map (FD/E6/MAP/17)

Taking down existing unserviceable top from teapoy varanadah and S&F new top of tapestry shall be of 18 mm thick prelaminated partical board both si8de decorative fitted with PVC eadging all around fixed to frame all as shown in drawing and as directed

S&F cap all as per shape and size shown on drawing & as directed

Painting to teapoy varandah with one coat of white synthetic enamelled paint of Ist quality including preparation of ols surface complete all as specified and directed

Table Bed Side Map (FD/E6/MAP-15)

Removint the old brocken/ unserviceable top and S&F new top made from prelaminated partical board extrier grade as per sample , shape and size shown in drawing complete all as specified and directed

Removing the old brocken/unserviceable side from from and S&F new side made from prelaminated partical board extrier grade as per sample shape & size shown on drawing complet all as specified and directed

Removing the old brpcken/unserviceable back ply and S&F new back ply made from12 mm thick commercial ply woodBWR grade as per shape and size shown on drawing comple all as specified and directed

Removing the old brocken/unserviceable shutter and S&F new shutter with magnatic catcher made from prelaminated partcal board extrier grade all as per sample shape and sixe shown on drawing complete all as specified and directed

Removing the old brocken/unserviceable drawer and S&F new drawer with tescopic chanel made from pre-laminated pertical board extrier grade all as per sample shape and size shown on trawing complete all as specified and directed

S&F PVC shoe all as per shape and size shown on drawing & as directed

Removing the old unserviceablehandle and S&F new handle all as per sample , shape and size shown on drawing complete all as specified and directed.

Painting to table Bed side with one coat of blacksynthetic enamelled paint of Ist quality including preparation of old surface complete all as specified and directed

Table Dining ORs (FD-165M)

Material & labour for replacment top with new top made out of 18 mm thick commercial partical board with 22 guage thick aluminium sheet with 2" over lapping with steel srew copmlete all as specified and as directed.

Material & labour for replacment of worn out frame with new MS square 25 mm 16 guage including stifnner where ever reqd complete all as specified and directed.

Material & labour for painting steel frame of table with one coat of black synthetic enamel paint complete all as specified and as directed.

Repair of Almirah Large/ medium steel with shelf (FD-1031/ 1032/ 351)

Removing of old unserviceable handle of almirah large/ medium steel and S&F new handle 125 mm long of cast iron zinc chromium plated coated of Godrej pattern with nuts and bolts complete all as shown on drawing and as directed.

Removing of old unserviceable locks of almirah large/ medium steel and S&F new steel locks of 6 levers special type with nuts and bolts including two steel keys complete all as shown on drawing and as directed.

Painting of almirah large steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by GE, complete all as shown on drawing and as directed.

Painting of almirah Medium steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by GE, complete all as shown on drawing and as directed.

Repair of Locker Bed Side Steel (FD-257/1029)

Removing of old unserviceable MS hinges of locker bed side steel and S & F new MS hinges 65 mm long with gas welding /revitting complete all as shown on drawing and as directed.

Removing of old unserviceable legs of locker bed side steel and S & F new legs of 1 mm thick MS sheet as per shape and size as shown on drawing and as directed.

Removing of old unserviceable handle of locker bed side steel and S & F new MS chromium plated handle 125 mm long complete all as shown on drawing and as directed.

Removing of old unserviceable hasp and staple of locker bed side and S & F new CP steel hasp and staple 75 mm long and fix with screw complete all as shown on drawing and as directed.

M & L for tighting of loose shelves with mild steel revitting/spot welding complete all as specified and directed.

Painting of locker bed side steel preparation of surface i.e filling all holes and cracks or detoriated spot of old painted steel furniture with primer, (internally/externally) putty than applying spray painting of synthetic enameled paint of Ist grade, shade smoke grey/olive green as approved by GE, complete all as specified and directed.

Chair CB Steel with Arms (FD-75 (M))

Removing of old/unserviceable seat from the steel chair and S&F new seat made of hard wood shisham duly canned with plastic canewhite 2 mm wide x 3 mm thick half round in Godrej pattrn as per shape and size of the existing steel chair as shown on drawing and as directed.

Removing of old/unserviceable back from the steel chair and S&F new back made of hard wood shisham duly canned with plastic canewhite 2 mm wide x 3 mm thick half round in Godrej pattrn as per shape and size of the existing steel chair as shown on drawing and as directed.

Removing of old/ Unseviceable hand rest of steel chair with arms and S&F of new hand rest made of shisham hard wood shape ansd size as per shown on drawing and as directed.

S&F of cap of steel chair with arms all as per shape and size as per drawing and as directed.

S&F of PVC shoe of steel chair with Arm all as per shape and size as per drawing & as directed.

Preparation of surface i.e filling all holesand cracks or detoriated spots of old painted steel furniture with primer ( Internally/ externally) putty than applying spray painting of synthetic enameled paint of Ist grade, shade olive green or as approved by GE, complete all as specified and directed.

Table Centre (FD-375)

Removing old unserviceable top from table centre and S&F new top of size 900x450&18 mm thick of prelaminated partical boardextrier gradetype-Iimelamine face as per IS-3087, top of teak face and whitye laminatedon other side with 4 mm thickIst class hard wood (teak wood) beading fixwith nails includings french polishing to beading complete all as specified and directed.

Removing of old unserviceable side short rail of table centre and S&F new side short rail of Ist classhard wood(teak wood) as per shape and size shown on drawing includings french polishing to match the other parts complete all as specified and directed.

Removing of old unserviceable side long rail of table centre and S&F new side long rail/short rail of Ist class hard wood(teak wood) as per shape and size shown on drawing includings french polishing to match the other parts complete all as specified and directed.

Removing old brocken unserviceable legs from table centre and S&F new legof Ist class hard wood(teak wood) including 04 nos PVC shoe as per shape and size shown in drawing includings french polishing to match the other parts complete all as specified and directed.

S&F wooden bracket 08 nos in each between each corner fixing with suitable screw all as specified in drawing & directed.

Removing old brocken/unserviceable centre stiffnerfrom and S&F new stiffnmer of Ist class hard wood (teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete all as specified and directed.

Removing old brocken side stiffner from S&F new stiffner of Ist class hard wood(Teak wood)as per shape and size shown on drawing including french polishing to match the otherparts complete all as specified and directed.

Preparation of surface of table centre by appliying one sealer coatand making the surface plain by scaping with fine sand paper and and polishing two coats of french/sprite polish on exposed surface to achive high class finish, complete all as specified and directed.

Table Computer Map

Taking down existing unserviceable top from table computer and S&F new top shall be of 18 mm thick prelaminated partical board edge moulded all around fixed to frame all as shown on drawing and as directed

Taking down existing unserviceable side frame from table computerand S&F new side frame shall be of 18 mm thick prelaminated partical board all as shown in drawing and as directed

Removing old unserviceeable key board from table computer and S&F new key board with telescopic chanel as per shape and size ncomplete all as specified and directed

Taking down existing unserviceable /brocken drawer from table computer and S&F new drawer fixed with telescopic chanel to frame complete all as shown on drawing and as directed

ROHIT ENTERPRISES

M/S CHANDER SHEKHAR