SPECIAL REPAIRS AND ADDITION/ALTERATION TO BUILDING NO P-61/1 (SERVENT QUARTERS OF OFFICER MESS) AT CGRA TUTICORIN UNDER GE(I) CG CHENNAI

Amount

Material and labour for Complete removal of existing treatment on wall surfaces and applying one coat of distemper complete all as specified and as directed.

Material and labour complete removal of existing treatment by brushing , washing,rubbing down, stopping of distempered and painted surfaces and cleaing etc of wall surface including pilasters and cornices and applying two coats of acrylic distemper over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for Preparation of old plastered wall surfaces and applying one coat of white wash complete all as specified and as directed.

Material and labour complete removal of existing treatment by brushing , washing,rubbing down, stopping of distempered and painted surfaces and cleaing etc of wall surface including pilasters and cornices and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed. Make: Apex Ultima from ASIAN/Weather coast Smooth from Berger

Taking down chowkhats or frames not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 sqm each but not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Flush shutters 30 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides with face is covered with decorative face venner with lipping/frame to match complete all as specified and as directed.

Supply and fix factory made 35mm thick 2nd class hard wood plain framed panelled shutter (any number of panels) with lock rail and panels of timber flat on both sides (feather edged ) or of 12mm thick veneered particle board medium density with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part-I) kilned seasoned and chemicaly presure treated complete all as spectified and as directed.

Supply and fix factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to cho

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,side hung type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,side huge type without sash bar , aluminium section weighing 0.55 kg/RM including necessary joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws and anodised aluminium fitting such as peg stays 150 mm long( 1 Nos), hinges type B-21 100 mm long (02 Nos) suitable handle (01 Nos) etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Material and labour for Prelaminated board 18/19 mm thick ,interior grade ,prelaminated two side with decorative choice laminationsn with lipping fixed with screws to wooden/timber frame work, drawers, office table , partition work etc complete all as specified and as directed. MAKE:Century ply/kit ply/Green ply

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix 100 mm Butt hinges,ISI marked medium weighted Stainless steel ISI Marked, and fixed and fixed complete all as specified and as directed.

Supply and fix 125 mm Butt hinges,ISI marked medium weighted Stainless steel ISI Marked, and fixed and fixed complete all as specified and as directed.

S & F Continuous (piano) hinges width of flaps 30mm,mild steel, bright finish or elec trogalvanised complete all as specified and as directed

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed to door with MS screws complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed.

Supply and fix hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100 mm complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles ,Premium quality 8 to 9 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 8 to 9 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in skirting etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid matt finish ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in flooring etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 400x350x7mm/ 350mmx250mm x7 mm thick/450x350x x 6mm/7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 10 mm thick complete all as specified and as directed. Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

M & L for pre polished Kota stone slab 20-25mm thick in riser of steps, Cooking platforms ,skirting, dado and pillar including nosing laid over cement screed and jointed over a screed bed of 15mm thick cement mortar 1:6 complete all as specified

Supply and fix Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Plain sheet glass 5 mm thick ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Stainless steel wire aluminium wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix aluminium wire cloth,, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel staples complete all as specified and as directed .

Supply and fix aluminium powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 of DG 916 and DG 202) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Supply and fix frosted sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane fixed to aluminum frame complete all as specified and as specified

Taking up or down of unservicable/rusted steel tubing 25 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 20 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 15 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 32 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repair PVC valveless symphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets and connection to pipe and fixing of chain and pull or level if any with and including provision of polyethylene pipe of low and high density or PVC 32 mm dia for low level cistern complete all as specified and as directed

Supply anfd fix in repairsplastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices complete all as specified and as directed

Supply and fix in repairs vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated shower rose size 125 mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type, long body 15mm dia bore Bib tap , cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type 15mm dia bore Angle stop valve , cast copper alloy , screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.

Supply and fix in repairs CP hand shower( health faucet) with 15 mm dia and 1500mm long flexible tube with wall hookcomplete all as specified and as directed.

Supply and fix in repairs 20 mm dia Aluminium powder coated curtain rods fixed over windows/door openings complete all as specified and as directed

Supply and fix in repairs 20 mm dia fancy Aluminium powder coated knobs/brackets for fixing curtain rod of 20 mm diameter complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix towel ring of PTMT fixed with including chromium plated brass screw and wooden plastic cleats (min weight 90 gms) complete all as specified and as directed.

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.

Supply and fix in repairs75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings such as bend, elbow, tee, Y etc with all access door and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix in repairs 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings such as bend, elbow, tee, Y etc with all access door and including taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) floor trap of 75/110 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) gully trap of 125/110 mm dia of outlet , setting and jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply anfd fix in repairs Vitreous china wash down water closet pan,white ( including fixing bolts ) including connection to drain pipe and to flushing pipe etcand removing old one and taken as credit complete all as specified and as directed

S & F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.Make: Jaquar &Co/Kohler

S & F sheet glass shelf assemebly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chormium plated bracket guard and railing 60cm long complete all as specified and as directed.Make: Jaquar &Co/Kohler

Material and labour for Double action door spring for fixed to door shutter and chowkhats of size 100mm, mild steel with steel wire spring, slove enamelled, black complete all as specified and as directed.

Taking down cement plastering on lathing (other than wire netting) without removing lathing in cement mortar (one side measured in cases where both sides are plastered) including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick wall or stone masnory , mixed with water proofing compound as per manufacturer’s instruction , finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Supply and fix in repair stainless steel sink with drainage board kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm with drain board etc made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to waste pipe etc., all as per manufacturer's instructions complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius half brick built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repairs Call bell ding dong, AC, 230 V, single pole, including taking down old unserviceable calling bell and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix in repairs Switch Bell push 6A piano type, 1 module including taking down old unserviceable bell push and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix in repairs switch piano 6 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs piano type socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs switch piano 16 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs socket piano 16 Amps 2/3 pin,single pole, one way ,two module , 240V AC,including taking down old unserviceable modular socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repairs two module Stepped type electronic fan regulator flush type , socket type , 230V on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix in repairs piano switch 6 Amps ,single pole, two way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Material and labour for Painting of ceiling fan/Exahust fan/DB panel of any size/make/model complete in site with synthetic enamel paint by spray painting including filling cavities with filler after cleaning all dust etc and numbering of ceiling fan complete all as specified and directed .

Supply and fix in repairs Hylem sheet of 3mm thickness of any colour including cutting into the required shape and size depending on the site condition complete all as specified and as directed by Engr in charge

Supply and fix MCB SPN of rating 40Amps , 240 V, C curve ,Rupturing capacity10KA including taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix MCB SP of rating 6-40Amps , 240 V, C curve ,Rupturing capacity10KAincluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix in repair ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix in repair capacitor 2.5 MFD suitable for ceiling fan complete all as specified and as directed.(Make : usha/Keltron/Uptran)

Material and labour for dismantling ceiling fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for dismantling exhaust fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for checking the ceiling fan clamps /split pin.rubber bushes ,canopy condition and replace the above items if found unserviceable to ensure safety of hanging of ceiling fans at CGRA qutrs/OTM accn complete all as specified and as directed. Note: The rate by the tenderer shall be inclusive of cost of clamps/split pin/rubber bushes/canopy etc

Supply and fix louver suitable exhaust fan 300mm with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers complete all as specified and directed.

Supply and fix LED security light fitting 18W 5700K made up of pressure die cast housing with toughened glass with optics/diffuser IP66 protection complete including taking down unserviceable security light fittings of any type any watts and taken as credit complete all as specified and as directed Make: C&S Cat No LTESSE-18WLED or equivalent in Wipro/Philips

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including non metallic rigid PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Concealing the existing the point wiring with replacing the existing PVC with the same size at the site and making the surface good as specified and as directed

Supply of LED light fittings 20W, 230V, 4ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 20 W 4 feet or equivalent in Havells/Philips.

Supply of LED light fittings 10W, 230V, 2ft, wall mount type min 6500K with suitable integral electronic drives , CRCA/poly carbonate type complete all as specifed and as directed. Make Crompton Light Linea 10 W 2 feet or equivalent in Havells/Philips.

Supply and fix exhaust fan with 4 nos of blades, steel body AC single Phase. 230V of size 300m sweep with rated speed of 1400 rpm alongwith bird guard to protect the fan in running condition complete all as specifed and as directed. Make Havells VENTILAIR DB NEO or equivalent in Almonard/Usha/Bajaj.

Material and labour for Point wiring with 4 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including non metallic rigid PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 4 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch 15 amps complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Material and labour for Earthing complete with galvanisedsteel pipe electrode, 40mm bore,medium grade, 2.5 metres length,buried directly and preferablyvertically in ground with top edgenot less than 1.25metres belowground level connected withearthing lead of 4mm dia galvanised iron or steel wire all as shown inPlate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified and directed. .

Supply and fix in repairs LED Post top light fitting 29W, 400K made up of aluminium die cast housing with acrylate reflector material and optical material along with stainless steel fixation material, IP 65 protection complete all as specified and as directed. Make: Philips Cat No: BGP161 LED2500/NW PSU 220-240V 7043 In equivalnet in Crompoton/Bajaj

ARUVI CONSTRUCTION

SIVAN BUILDERS

VVM CONSTRUCTIONS

S KUMARAN