PMJTS20039-Replacement of Fire water line network, Building water curtain line and SR Tank water sprinkler at NRPL, Bharatpur.

Amount

Supply of IS: 3589, Gr. Fe 410 pipes with factory coated internal coating at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.

8.625" ODX 0.250" WT IS3589 FE410 Pipe

6.625" ODx 0.250" WT IS3589 FE410 Pipe

4.5" ODx 0.237" WT ASTM A 106 Gr B

3.5" OD x 0.216"WT ASTM A 106 Gr B

2.375" OD x 0.218"WT ASTM A 106 Gr B

1.315" OD x 0.179"WT ASTM A 106 Gr B

Supply of Valves : API 600 Gate valve (HOV)-FOR FIRE WATER NETWORK

8"x ANSI 150 # HOV F/F API 600 Gate Valve

6"x ANSI 150 # HOV F/F API 600 Gate Valve

4"x ANSI 150 # HOV F/F API 600 Gate Valve

3"x ANSI 150 # HOV F/F API 600 Gate Valve

1"x ANSI 800# HOV W/W API 602 Gate Valve

Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.

8", SORF FLANGE, ANSI - 150# (B 16.5)

8", BLRF FLANGE, ANSI - 150# (B 16.5)

6", WNRF FLANGE, ANSI - 150# (B 16.5)

6", BLRF FLANGE, ANSI - 150# (B 16.5)

4", WNRF FLANGE, ANSI - 150# (B 16.5)

4", BLRF FLANGE, ANSI - 150# (B 16.5)

3", WNRF FLANGE, ANSI - 150# (B 16.5)

3", BLRF FLANGE, ANSI - 150# (B 16.5)

2", WNRF FLANGE, ANSI - 150# (B 16.5)

2", BLRF FLANGE, ANSI - 150# (B 16.5)

Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.

8" SWMG ANSI 150#

6" SWMG ANSI 150#

4" SWMG ANSI 150#

3" SWMG ANSI 150#

2" SWMG ANSI 150#

1" SWMG ANSI 150#

Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.

Fasteners for Flanges 8" x 150# (0.750" Dia. X 4.75" Length)

Fasteners for Flanges 6" x 150# (0.750" Dia. X 4.50" Length)

Fasteners for Flanges 4" x 150# (0.625" Dia. X 4.00" Length )

Fasteners for Flanges 3" x 150# (0.625" Dia. X 4.00" Length )

Fasteners for Flanges 2" x 150# (0.625" Dia. X 3.75" Length )

Concentric Reducers

8"x 6"x CR x 150#

PIPE FITTINGS: Supply and delivery of Pipe Fittings such as 90 deg LR Bends, 45 deg LR Bends, Equal Tees, Unequal Tees, Weld O-lets, Concentric / Eccentric Reducers etc..of ANSI 150 CLASS as per technical specifications indicated in tender documents

8" LR BEND 90 DEG, ANSI 150#

3" ANSI 150# 90 deg LR Bends

2" ANSI 150# 90 deg LR Bends

8" EQUAL Tee ANSI 150#

8" x 4" ANSI 150# Un Equal Tee

8" x 3" ANSI 150# Un Equal Tee

6" ANSI 150# 90 deg LR Bends

FIRE FIGHTING EQUIPMENT: Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document. (complete in all respect as per instruction of EIC/ Site engineer.)

Water curtain nozzle

Supply of Pressure Indicators (PI) of the range 0 to 20 Kg / Cm2 as per the technical specifications attached in the Tender.

Services

Pipe Laying: Taking delivery of Pipes of all types and pressure rating from the designated location within station premises, transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground pipes at elevations specified in the drawings, including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.

8.625" ODx 0.250" WT IS3589 FE410 Pipe

6.625" ODx 0.250" WT IS3589 FE410 Pipe

4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe FW

3.5" OD x 0.216"WT ASTM A 106 Gr B FW

2.375" OD x 0.218"WT ASTM A 106 Gr B -FW

1.315" OD x 0.179"WT ASTM A 106 Gr B -FW

Installation of VALVES: Taking delivery of valves of all types and pressure rating from the designated location within station premises, transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, flood coating and wrapping of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.

8"x ANSI 150 # HOV F/F API 600 Gate Valve

6"x ANSI 150 # HOV F/F API 600 Gate Valve

4"x ANSI 150 # HOV F/F API 600 Gate Valve

3"x ANSI 150 # HOV F/F API 600 Gate Valve

1"x ANSI 800# HOV W/W API 602 Gate Valve

High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150#

Double headed hydrant valve complete as per IS: 5290 alongwith 4" x150# WNRF Flange

Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and interpreting the results of weld quality and reporting the same to the Site Engineer together with recommendations as to the acceptability or otherwise of the welds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge inclusive of supply of all pesonnel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all respects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size radiographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiography not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on type branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost.

8" NB Pipe Joints

6" NB Pipe Joints

4" NB Pipe Joints

3" NB Pipe Joints

Dismantling of Structures: Dismantling by opening joints or by gas cutting/ cold cutting (wherever required as per site condition) of existing piping & steel structural such as support for pipes, pipe fittings, valves, plate forms, walkways, stairways etc. including excavation work wherever required handling, loading into truck for purpose of weighing, shifting to the designated location within the pump station premises and handing over, completing the work in all respect as per drawings, instruction of the Site Engineer / EIC.

Dismantling of Piping (Aboveground):Dismantling of existing over ground piping works of all types and sizes by opening flange joints or by gas cutting/ cold cutting or any other approved suitable means without damaging other portions of work. The job includes cutting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets nuts, bolts etc. attached supports alongwith any instruments such as pressure gauge, temperature gauge etc. handling, transporting and storing at owner's designated store in safe manner to avoid damage including supply of all labour, materials, equipments, consumables etc. necessary to perform and complete the work in all respects as per drawings, instructions of the Site Engineer / EIC (payment shall be made on Weight measurement basis of dismantled piping including valves, bends, tees, flanges,reducers etc.). Note : The contractor shall indicate the piping system to be dismantled and shall take specific approval from the Site engineer before dismantling of pipe. Certain redundant pipes which in the opinion of the Owner need not be retrieived, thoseitems shall not be dismantelled.

From 1.315" to 36" OD Piping

Dismantling of Piping (Underground): Dismantling the existing under ground piping, locating, retrieving including excavating the proper trenches by cutting the pipes without damaging other portions of work. The job includes cutting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets, nuts, bolts etc., handling, transporting and storing at owner's designated store in safe manner to avoid damage including supply of all labour, materials, equipment consumables etc. necessary to perform and complete the work in all respects as per drawing, instructions of the Site Engineer / EIC. (Payment shall be made on the Weight measurement basis of dismantled piping including valves, bend, tees,flanges,reducers etc.). Note : The contractor shall indicate the piping system to be dismantled and shall take specific approval from the Site engineer before dismantling of pipe.Certain redundant pipes which in the opinion of the Owner need not be retrieived, those items shall not be dismantled.

From 1.315" to 36" OD Piping

WBM ROAD / CONCRETE BREAKING: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) as per specifications and direction of the Site Engineer, job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any.

Composite

COOLING WATER SYSTEM - DOUBLE DECK FLOATING ROOF PRODUCT TANK : Design, detail engineering including sizing calculations , supply of all material such as pipes, piping, flanges, gaskets, U-clamps, half couplings, spray nozzle etc. at site for fabrication of cooling watering mains for each of the storage tanks including supply & fabrication of riser pipes required as per the design calculations / of specified size, supply and fabrication of cooling ring mains in sections by cold bending , Fabrication & erection of support brackets and U clamps for ring main sand riser pipes, erection of ring mains and riser pipes on the bracket and fixing including installation of bends ,tees, flanges, blanks etc. Puncturing and welding threaded half coupling on the ring mains and locating as per the drawing, installation of spray nozzles, connecting it to riser pipes, hydrostatic testing of riser pipes, cleaning and painting the pipe with specified painting system and the structural painting in line with tank Shell painting system including all inputs such as labour, consumables etc. The scope shall also include commissioning of system, complete in all respect in accordance with the Contract and as Per the instruction of Engineer - In-Charge/ Site Engineer. Nominal Capacity: 250 Kl, ( IOCL Drawing for reference A 402-04-013).

Supply and Installation of Butter Fly Valves of size 80 mm (150 series)for quickly operation of Sprinker System ONLY manually complete in allrespect as per instruction of EIC/ Site engineer.

Supply, Fabrication, fixing of angle supports Dimensions 50x50x5 mm withfittings all complete at distance of 3.0 meter each for holding/fixing 50mm Dia pipe along 70 m length of main ring pipe complete in allrespect as per instruction of EIC/ Site engineer.

Epoxy external coating of firewater piping: Cleaning exposed steel surfaces of piping, equipment and valves, etc by sand/shot blasting, cleaned surface conforming to Sa 2 1/2 or with power wire brush (wherever sand/shot blast cleaning is not possible) free of dust, grease, mill scales etc. and applying HIGH BUILD SOLVENT FREE LIQUID EPOXY COATING with total thickness (DFT) of 700-1000 microns (manually or by spray application), with approved material, labour, equipment etc. and completing the job in all respects as per specification and instructions of Site Engineer / EIC.

8.625" ODx 0.250" WT IS3589 FE410 Pipe

6.625" ODx 0.280" WT ASTM A 106 Gr B bare Pipe

4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe FW

3.5" OD x 0.216"WT ASTM A 106 Gr B FW

2.375" OD x 0.218"WT ASTM A 106 Gr B bare pipe

1.315" OD x 0.179"WT ASTM A 106 Gr B -FW

Steel: Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequered plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respects, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil.

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Finishing

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 cement : 3 fine sand)

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying, cutting, bending, hoisting, placing in position with proper pre-cast concrete block cover and binding by PVC coated (extrusion process) 18 Guage SWG wire, high yield strength deformed bars of grade FE500 conforming to IS:1786 with protective fusion epoxy coating as per IS:13620 for all R.C.C works including all necessary handling at all heights and depths complete in all respects as per specifications and directions of the Engineer-in-Charge.

DISMANTLING & DEMOLISHING : Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of the Engineer-in-Charge.

Providing and laying design mix cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately. (2) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately].

Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer

Motiprabha Infratech Pvt. Ltd.

Brij Engineering Works

R.C. KUNTAL CONTRACTOR

G J Contractors Fabricators Erectors

acute construction

MADRA CONSTRUCTION

san infotech services

J.K. CONSTRUCTION

VECTRAS

Jay Gauri Projects (I) Pvt. Ltd.