Design and Erect the Automation facilities to TNCSC Ware houses for grain bag and gunny bundle handling system and Generator

Amount

Machineries

Site Study, Preparation of 3D animation, Design, Supply, Erection and commissioning of grain bag management and automation system with Transporation ,Installation and 1 year maintenance for bag handling system etc., Specification givien in following pages Lorry Unloader 1No Portable Conveyor :15 Ft Long x 1 No Portable Conveyor :10 Ft Long x 1 No Hydraulic Stacker machine 1 No and also following accessories on Geared motor, 500mm wide rubber Belting rough top, Head and Tail drum with SKF/FAG/NTN bearing with suitable CI bearing housings and carrying and return idlers with sealed bearing, fabric conveyor frame, Reversible starter panel and Industrial grade plug, socket with 5M Cable. (Basic price total value of four component plus accessories put together may alone be quoted since this is an inseparable turnkey project)

The Three TON Diesel Forklift (Auto Transmission) with a load capacity of 3000 KG as 500mm load centre Running by Diesel with a travel speed of 18.5 Kg/Hr ,lifting speed of 300mm/sec with load ,lowering speed is 560mm /sec with load and engaging with hydraulic food pedal service for brake. Mechanical hand lever for parking and having a battery 12V .70 Ah with Automatic transmission type with engine capacity of 49bhp@2650rpm for rated torque,four numbers of cylinder in attached,fuel tank capacity of 60 Ltrs and steering type is power with tilt adustable with loack etc.,

Automatic weight normalization and standardizing conveyor with continuous stitching machine for air sacs of 50kg with additional change over parts .the capacity of conveyor is upto 50Kgs , power consuption is less than or equal to 0.5kw and height of conveyor is 350mm upto 500mm ,width of conveyor is 450mm Up to 800mm and lenght of conveyor is 2000mm Up to 2500 mm with the polyurethane belt and mild steel body with fine powder coated to industrial standard

Supply 10KVA/8KW Diesel Generator set with Air cooled diesel engine developing 16BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation, Transist charges, Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government . The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar /Mahendra/cummins/Similar ISI-Makes)

Supply 20KVA/16KW Diesel Generator set with Water cooled diesel engine developing 25BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications. The cost includes Transporation, Transist charges,Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government .The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar/ Mahendra/cummins/Similar ISI-Makes)

Supply 30KVA/24KW Diesel Generator set with Water cooled diesel engine developing 42BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation, Transist charges,Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government .The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar/ Mahendra/cummins/Similar ISI-Makes)

Supply 45KVA/36KW Diesel Generator set with Water cooled diesel engine developing 56BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation, Transist charges,Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government .The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar /Mahendra/cummins/Similar ISI-Makes)

Supply 62.5KVA/50KW Diesel Generator set with Water cooled diesel engine developing 83BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation,Loading ,unloading, Transist charges,commissioning ,testing, etc complete.The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar / Mahendra/cummins/Similar ISI-Makes)

Supply 82.5KVA Diesel Generator set with Water cooled diesel engine developing 83BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation, Transist charges,Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government .The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar/ Mahendra/cummins/Similar ISI-Makes)

Supply 125KVA/100KW Diesel Generator set with Water cooled diesel engine developing 156BHP @ 1500rpm coupled to 3phase, 415V, 50Hz alternator mounted on a common base frame complete with fuel tank, battery with standard control panel and Residential Silencer and Acoustic Enclosure conforming to CPCBII norms as per Department specifications.The cost includes Transporation, Transist charges,Commissioning, Testing Charges & unloading Charges. The rates includesall Taxes as arised by the Government .The control panel of ASAS Type Panel-A and with KRM unit with 3years charges .The Engine and Alternator must be of same reputed make (Make: Kirloskar /Mahendra / cummins /Similar ISI-Makes)

Supply and fixing ofThree phase -four pole Change over switch of 63Amps with front handle(cubical type with suitable sheet steel enclosures) and with suitable angle frame,enclosures, and earth connections and as standard specification and materials of ISI make.and as per site requirements as directed.( L&T make)

Supply and fixing ofThree phase -four pole Change over switch of 125Amps with front handle(cubical type with suitable Sheet steel enclosures) and with suitable angle frame,adopter boxes,enclosures and earth connections and as standard specification and materials of ISI make.and as per site requirements as directed Make ( L& T). SD-248K

Supply and fixing ofThree phase -four pole Change over switch of 160Amps with front handle(cubical type with suitable Sheet steel enclosures) and with suitable angle frame,adopter boxes,enclosures and earth connections and as standard specification and materials of ISI make.and as per site requirements as directed Make ( L& T). SD-248L

Supply and fixing ofThree phase -four pole Change over switch of 200Amps with front handle(cubical type with suitable sheet steel enclosures) and with suitable angle frame,adopter boxes,enclosures and earth connections and as standard specification and materials of ISI make.and as per site requirements as directed.SD-248D Make L&T

Supply and fixing ofThree phase -four pole Change over switch of 250Amps with front handle(cubical type with suitable sheet steel enclosures) and with suitable angle frame,adopter boxes,enclosures and earth connections and as standard specification and materials of ISI make.and as per site requirements as directed.( make L& T) SD-248C

Supply and laying of 3 ½ x25Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-204

Supply and clamping of 3 ½ x 25Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-222

Supply and providing cable and termination of 3 ½ x25Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-235

Supply and fixing of brass cable gland for 3 ½ x 25 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-186

Supply and laying of 3 ½ x35Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-205

Supply and clamping of 3 ½ x 35Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-223

Supply and providing cable and termination of 3 ½ x35Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-236

Supply and fixing of brass cable gland for 3 ½ x 35 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-187

Supply and laying of 3 ½ x50Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-206

Supply and clamping of 3 ½ x 50Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-224

Supply and providing cable and termination of 3 ½ x50Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-236

Supply and fixing of brass cable gland for 3 ½ x 50 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-187

Supply and laying of 3 ½ x70Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-207

Supply and clamping of 3 ½ x 70Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-225

Supply and providing cable and termination of 3 ½ x70Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-237

Supply and fixing of brass cable gland for 3 ½ x 70 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-188

Supply and laying of 3 ½ x120Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-209

Supply and clamping of 3 ½ x 120Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-227

Supply and providing cable and termination of 3 ½ x120Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-237

Supply and fixing of brass cable gland for 3 ½ x 120 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-188

Supply and laying of 3 ½ x185Sq.mm PVC armoured LTUG Alu.cable in trench to beexcavaled at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD-211

Supply and clamping of 3 ½ x 185Sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.SD-229

Supply and providing cable and termination of 3 ½ x185Sq.mm PVC LTUG Aluminium, armoured cable with necessary aluminim cable sockets by crimping etc., with electrical connection complete. SD-238

Supply and fixing of brass cable gland for 3 ½ x 185 Sq.mm PVC armoured LTUG Alu. cable with earth connection.-SD-193

Supplying,Erecting, connecting & commissioning a of 2.5Mtr. long 40mm. dia GI Pipe with holes drilled diametrically opposite to each other once every 150mm. in an earth pitof 380x380x3500mm. filled with salt and charcoal mixed with sand in alternate layers 150mm. each upto a height of 3000mm. from bottom. The pipe shall have provision for watering through a funnel. It shall also have provision for connecting 25x6mm. Cu Flat on two sides. A masonary strucutre shall be constructed to adepth of 450mm. and a Heavy duty SFRC Cover shall be used to cover the pit. The cost of digging with man power/Machinary and back filling shall also be included ,Sand, salt and charcoal are in the Contractor's scope and as directed at site

Supply and laying of 4x10sq.mm sized PVC armoured LTUG alumium cable in the the trench and refilling the earth to making good. (SD-202)

Supply and clamping of 4 x 10 Sq.mm PVC LTUG armoured Alunium cable on post or on wall with MS clamps. SD-220

Supply and fixing of brass cable gland for 4 x 10 sqmm PVC armoured LTUG cable with earth connection SD-185

Earthing as per the ISI specification with an potential earth electrode, Model STANDARD PS42-40mm dia, wall thickness 3.25mm, terminal size 25x8mm, terminal hole dia 12mm, 2.1M long galvanized including 1bag ( 25g to a bag ) of earth life compound as per IS 3043, Base Metal : IS marked branded mild steel pipes. ( ASSLOCK EARTHING ) and including Earthing connection work using suitable copper plate ( not less than 25mm and as directed at site by Departmental Officers)( for Change-over switch & Meter Board/DB units)

Supply and run of 4 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour(SD-62).

Supply and run of 4 of 25 sqmm (168/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth connection with painting of suitable colour. SD-57K

Provisionn for Genset Bed construction work of size2.50Mx1.50M with suitable platform height -2feet above ground level as per the site condition.The cost includes Earth excavation,filling with sand, Cement concrete with 1:1 1/2:3 ratio for top finishing layer of 15cm thickness, Brick work for all round wall and mid wall in 23cm thickness with chamber bricks,Plastering complete of 12mm thickness and with colour washing for Bed structure and as directed at site .The construction design of Genset Bed should get approval before execution from The Executive Engineer.

Provisionn for Genset Bed construction work of size3.20Mx1.60M with suitable platform height -2feet above ground level as per the site condition.The cost includes Earth excavation,filling with sand, Cement concrete with 1:1 1/2:3 ratio for top finishing layer of 15cm thickness, Brick work for all round wall and mid wall in 23cm thickness with chamber bricks,Plastering complete of 12mm thickness and with colour washing for Bed structure and as directed at site .The construction design of Genset Bed should get approval before execution from The Executive Engineer.

Provisionn for Genset Bed construction work of size3.50Mx1.70M with suitable platform height -2feet above ground level as per the site condition.The cost includes Earth excavation,filling with sand, Cement concrete with 1:1 1/2:3 ratio for top finishing layer of 15cm thickness, Brick work for all round wall and mid wall in 23cm thickness with chamber bricks,Plastering complete of 12mm thickness and with colour washing for Bed structure and as directed at site .The construction design of Genset Bed should get approval before execution from The Executive Engineer.

Provisionn for Genset Bed construction work of size4.00Mx2.00M with suitable platform height -2feet above ground level as per the site condition.The cost includes Earth excavation,filling with sand, Cement concrete with 1:1 1/2:3 ratio for top finishing layer of 15cm thickness, Brick work for all round wall and mid wall in 23cm thickness with chamber bricks,Plastering complete of 12mm thickness and with colour washing for Bed structure and as directed at site .The construction design of Genset Bed should get approval before execution from The Executive Engineer.

Provision for purchase of 100litre of Diesel for initial testing purpose .

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection SD-76 ( for earth connections to Genset & Change-over switch)

Supply and fixing of 12 V -10Amps-battery charger unit(Option--Automatmic charger cut-off with under/over-voltage protection model) type with stand and complete set(market rate) of ISI make and as directed

Supply and laying of 2core 6 Sq.mm Aluminium cable with termination for battery charger cable provision ofISI make and as directed ( for Battery charger unit's power connection)

Supply and clamping of 2core 6 Sq.mm copper cable with termination for battery charger cable provision ofISI make and as directedSD-215( for Battery charger unit's power connection)

Supply and laying GI pipe of size -65mm dia for road crossing protect of UG cable including all incidental charges.SD-246E

Supply of 35litre PVC cane for Diesel purchase purpose with funel

Supply and fixing of Vetical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 63A 4 pole MCB isolater as incoming and 4 Nos. 32 A TP MCB as outgoing in surface type fitted with suitable angle frame in wall and making good of the concealed portion with earth connection and provision for taking up UG cable. The DB with 100A -Copper bus bar for each phase with 2neutral Bar,2 Earth bar and cable ties for cable management.The MCB-DB and MCB's should be with the ISI mark (DB of Legrand make and MCB of L & T make) SD-179A

Supply and fixing of 3phase Fabricated Distribution Board with 1No-125A Main switch and 20nos -outputs with Double Pole MCCB of 20A capacity in steel distribution boards surface type fitted with busbar and neutral links with provision for taking up cable of size not less than 35sq.mm.The DB should be fixed on suitable angle iron frame work with earth connection.The DB consist of following with metal door cover with IP 42 protecion with Multifunction meter ,Indication Lamp ,MS Adopter Box-2nos.(DATA) ( make of )legrand/Hanger( The MCB may be changed for Air conditioner- circuit outputs with Double Pole MCCB with 20A/32A capacity and design should be approval from departmental Officers)

Providing Essentail /Non Essential Distribution Panel with one number of 200A Change-over switch in suitable size chamber ( cubical -front handle -L&T make), cable chamber for Making Two Genset 's Output as incoming to Change over switch and output of Changer to a bus bar ( Size-50x6mm) for taking one /two ouputs to Load DB through terminals . The Distribution Pannel consist of copper Bus Bar , cable chamber,bus bar chamber, suitable Connecting Terminals for taking input /Output.The cost includes fabrication of Panel unit,fixing charges with suitable angle frames, termination charges, transporation charges, earth connections etc complete. and as directed at site.

Providing Essentail /Non Essential Distribution Panel with one number of 125A Change-over switch in suitable size chamber ( cubical -front handle -L&T make), cable chamber for Making Two Genset 's Output as incoming to Change over switch and output of Changer to a bus bar ( Size-50x6mm) for taking one /two ouputs to Load DB through terminals . The Distribution Pannel consist of copper Bus Bar , cable chamber,bus bar chamber, suitable Connecting Terminals for taking input /Output.The cost includes fabrication of Panel unit,fixing charges with suitable angle frames, termination charges, transporation charges, earth connections etc complete. and as directed at site.

Labour Charges for removing the Existing Power distribution cables/wires and re-connecting to the suitable new Panel /DB units with equal load ditribution as per site condition.The cost includes the labour charges and other incidental charges .

Provision for Preparation, Submission of completion report for 20/30/45/62.5/82.5/125KVA Generator to Electrical Inspector, ( respective Electrical Inspector Office zone of the genset installed location) and arranging Inspection to site, Obtaining defective report from EI(If any), Submission of rectification report(if any) and Obtaining safety certificate for the Generator in respective site . This rate exclusive of materials involved during rectification of defects and inclusive of all charges payable to Electrical Inspection related works, site inspection's transportation charges . The contractor should arrage following documents for getting Safety certificate are 1. Original challan - 2Nos for Generator inspection & registration fees from Electrical Inspector Office. 2. Completion report received from work executed contractors. 3. Form A-1 in duplicate 4. Copy of Invoice of Generator supply Bill. 5. Copy of TNEB card of respective site. The departmental Engineers should arrange Signature of Regional Heads with respective Covering Letter for submission of Documents.

Provision for cement concrete work for making the damaged portion good after cable laying work in the existing concrete road ,etc complete and as directed at site.The cost includes all materails & labour cost,transporation charges.

Labour charges for breaking of existing concrete road by using machine for laying cable/genset bed/earth pit as per site condition required.The cost includes the hire charges of machinary unit,transporation charges and other incidental charges etc complete and as directed at site.

Providing Lighitng arrangments with three colour Bulbs( Red,Yellow,Blue) for indication of Three phase EB power supply availablity with 6A control switches in suitable TW Box and with necessary connections.

R R THULASI BUILDERS INDIA P LTD