Loading…
Loading…
Tender ID
Tender Value
₹35.5 Cr
EMD Value
₹71.0 L
Closing Date
27 Mar 2026, 2:00 pmClosed
CGM (PPnD), AEGCL
O/o the Managing Director, Assam Electricity Grid Corporation Limited, 1st Floor, Bijulee Bhawan, Paltanbazar, Guwahati-781001
Augmentation of 2x100 MVA, 220/132 KV Rangia GSS By 2x200 MVA Auto-Transformer (Phase-II)
2026_AEGCL_51717_1
AEGCL/MD/TECH-1218/2025-26/BID
Open Tender
Electrical Works
Turn-key
220/132 KV Rangia GSS, AEGCL
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,000
₹71.0 L
Yes
10 Apr 2026
6 Mar 2026
30 Mar 2026
6 Mar 2026
27 Mar 2026
13 Mar 2026
Supply of three phase Auto Transformers and transformer oil
Supply of 200 MVA, 220/132 kV three Phase Auto Transformers (without transformer Oil) with all fittings and accessories as specified including cost of all routine tests including loading and unloading at site
Transformer oil for 200 MVA Transformer plus 10% extra
Supply of N2 Fire prevention & extinguishing system (as per clause 3.17.38 and Annexure-P of Section-3)
Supply of Stainless-steel Oil sampling bottles (1 Litre Capacity) (as per Annexure-Q of Section-3) & Syringes for Oil Sampling
Supply of Online Oil drying system with Moisture & Hydrogen monitor (as per Annexure-O of Section-3)
Supply of Online dissolved Hydrogen & Moisture monitoring system (as per clause 3.17.40 and Annexure-N of Section-3)
Supply of mandatory spares
HV Bushing
IV Bushing
LV Bushing
Neutral Bushing
Magnetic oil level gauge with low oil level
Buchholz Relay complete with float and contacts (Main tank)
Local WTI complete with sensing device & contacts
Local oil temperature indicator with contacts & sensing device
Remote WTI complete with three sets of 4-20mA contacts
Remote OTI complete with three sets of 4-20mA contacts
Pt 100 sensors
Pressure Relief device
Set of valves & Gaskets (complete set for one transformer)
Breather assembly (one of each type) for conservator and OLTC
Remote tap position indicator
Oil surge relay
Cooler Fan with Motor
Oil pump & motor
Starters, contactors, switches & relays for electrical control panels (one set of each type)
Digital RTCC Panel
Isolators and accessories as per specification
Supply of isolators with both manual and motor driven operating mechanism along with support isolators, clamps & connectors as required
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
245 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
145 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
198 KV, 10KA, LA complete with pipe structure surge monitor etc.
120KV,10KA LA complete with pipe structures, surge monitor, etc.
Bus post insulators as per specification
245 KV, 1-phase solid core BPI including support structures, foundation bolts, nuts & bolts and other accessories as required
Supply of 245 kV bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required
220 KV Single phase Multicore CT
132 KV Single phase Multicore CT
Supply of Power Cables
2C, 6MM SQ
4C, 16MM SQ
3.5C, 35 MM SQ
3.5C, 70MM SQ
Cable support
Supply of control cables
4C, 2.5MM SQ
7C, 1.5MM SQ
12C, 1.5MM SQ
19C, 1.5MM SQ
Supply of conductors, clamps and connectors
T Clamp-Single (Zebra to Zebra)
T Clamp-(Twin Zebra to Single Zebra)
CB Clamp (Twin ACSR Zebra)
Isolator Clamp (Twin ACSR Zebra), Horizontal Type
PI Clamp (Twin ACSR Zebra)
ACSR Zebra Conductor
Earthmat extension and Grounding of equipments
50 x 6 mm GI Flat
65 x 12 mm GI Flat
Earth electrode, 100 mm Dia, 3 mtr. Long GI Pipe
2 TON capacity industrial type split air conditioning units for control room with automatic controller
Supply of Outdoor LED lighting for switchyard including lighting distribution board, cables, switches, socket, auxilary receptacle, MCBs wherever necessary (12 nos. of 250 W LED lights per Lot)
Supply for Augmentation of 132 kV Transfer Bus from Single ACSR Zebra to Twin ACSR Zebra
Single suspension for twin conductor bolted type hardware fittings
Single tension for twin conductor bolted type hardware fittings
Spacer for twin Zebra conductor
ACSR Zebra Conductor
T connector (Twin Zebra to Single Zebra)
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (Schedule No. 2 - Installation and Other Services (Civil Works, Erection, Testing & Commissioning Services)) (DOMESTIC TENDERS - RATES ARE TO GIVEN IN RUPEES (INR) ONLY) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Civil Works (including dismantling and foundation works), Erection, testing & commissioning of 200 MVA, 220/132 kV transformer including associated equipment, fire protection scheme, laying and terminating of all power and control cables
Dragging in of total MT of 200 MVA, 220/132 kV transformer from unloading site to transformer pad (MT as per specs)
Site preparation (preparing the site for dragging of transformer) including purchase of slippers
Dismantling of existing 100 MVA, 220/132 kV transformer including de-termination of existing cable and terminal equipment connections
Dragging out of total 129.5 MT of 100 MVA, 220/132 kV transformer from transformer pad to suitable storage place
Materials for terminal connection for commissioning of the 200 MVA, 220/132 kV transformer such as lugs, cable glands tie bends etc.
Jumpering of different equipment and required terminal connectors
Nitrogen gas cylinder
Engagement of semi-skilled labour to help departmental employees to minimise shut down period
Erection, Testing and commissioning of Isolators
Erection of Isolator mounting structure including construction of foundation and supply of all foundation materials and labour
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
Erection Testing and Commissioning of Isolators with all accessories, laying and termination of LT power & control cables, fitting fixing of clamps and jumpers etc. as required
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
Erection Testing and Commissioning of Circuit breaker alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and conectors and including construction of foundation and supply of all foundation materials and labour complete.
145 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
Erection and Testing commissioning of Bus post insulator including support structures, clamp connector and other accessories as required
Erection of 245 kV BPI mounting structures including construction of foundation and supply of all foundation materials and labour
Erection, Testing & commissioning of 245 kV BPI including clamp connectors and other accessories as required
Erection Testing and Commissioning of Circuit breaker alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and conectors and including construction of foundation and supply of all foundation materials and labour complete.
245 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
Erection by retrofitting of existing mounting structure, testing & commissioning of Lighting Arrester including laying & terminating of LT power and control cables etc. as required for completion of job and associated civil works
198 kV , 10 KA, LA complete with pipe structures, surge monitor etc.
120 kV , 10 KA, LA complete with pipe structures, surge monitor etc.
Erection by retrofitting of existing mounting structure, testing & commissioning of Current transformers including laying & terminating of LT power and control cables etc. as required for completion of job and associated civil works
220 KV Single phase Multicore CT
132 KV Single phase Multicore CT
Integration of existing CRP (Hitachi Energy make) with existing SAS (Hitachi Energy Make) along with upgradation of hardware and software for the integration as per requirement including licence upgradation (if required) with validity of minimum 10 years
For Augmentation of 132 kV Transfer Bus from Single ACSR Zebra to Twin ACSR Zebra
Dismantling
Single Bus conductor
Jumper, Drop etc
Single tension clamps & HW fittings etc
Insulators etc
Single suspension clamps & HW fitting etc
Stringing
Stringing of ACSR Zebra Conductors including hanging of disc insulator along with fitting and fixings of all clamps and hardware fittings, all jumpering works to isolators with L piece with Upg clamps complete as required and as directed.
Item Wise BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (Schedule No. 2A – Freight & Insurance) (DOMESTIC TENDERS - RATES ARE TO GIVEN IN RUPEES (INR) ONLY) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Supply of three phase Auto Transformers and transformer oil
Supply of 200 MVA, 220/132 kV three Phase Auto Transformers (without transformer Oil) with all fittings and accessories as specified including cost of all routine tests including loading and unloading at site
Transformer oil for 200 MVA Transformer plus 10% extra
Supply of N2 Fire prevention & extinguishing system (as per clause 3.17.38 and Annexure-P of Section-3)
Supply of Stainless-steel Oil sampling bottles (1 Litre Capacity) (as per Annexure-Q of Section-3) & Syringes for Oil Sampling
Supply of Online Oil drying system with Moisture & Hydrogen monitor (as per Annexure-O of Section-3)
Supply of Online dissolved Hydrogen & Moisture monitoring system (as per clause 3.17.40 and Annexure-N of Section-3)
Supply of mandatory spares
HV Bushing
IV Bushing
LV Bushing
Neutral Bushing
Magnetic oil level gauge with low oil level
Buchholz Relay complete with float and contacts (Main tank)
Local WTI complete with sensing device & contacts
Local oil temperature indicator with contacts & sensing device
Remote WTI complete with three sets of 4-20mA contacts
Remote OTI complete with three sets of 4-20mA contacts
Pt 100 sensors
Pressure Relief device
Set of valves & Gaskets (complete set for one transformer)
Breather assembly (one of each type) for conservator and OLTC
Remote tap position indicator
Oil surge relay
Cooler Fan with Motor
Oil pump & motor
Starters, contactors, switches & relays for electrical control panels (one set of each type)
Digital RTCC Panel
Isolators and accessories as per specification
Supply of isolators with both manual and motor driven operating mechanism along with support isolators, clamps & connectors as required
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with single ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator with double ES
245 KV, 3150A, 50 KA for 3sec Horizontal center break Isolator without ES (Tandem Type)
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES
145 KV, 2000A, 40KA for 3 sec Horizontal center break Isolator without ES (Tandem Type)
245 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
145 KV, 3150 A, 40 kA for 3 sec Circuit breaker with all fittings & accessories
198 KV, 10KA, LA complete with pipe structure surge monitor etc.
120KV,10KA LA complete with pipe structures, surge monitor, etc.
Bus post insulators as per specification
245 KV, 1-phase solid core BPI including support structures, foundation bolts, nuts & bolts and other accessories as required
Supply of 245 kV bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required
220 KV Single phase Multicore CT
132 KV Single phase Multicore CT
Supply of Power Cables
2C, 6MM SQ
4C, 16MM SQ
3.5C, 35 MM SQ
3.5C, 70MM SQ
Cable support
Supply of control cables
4C, 2.5MM SQ
7C, 1.5MM SQ
12C, 1.5MM SQ
19C, 1.5MM SQ
Supply of conductors, clamps and connectors
T Clamp-Single (Zebra to Zebra)
T Clamp-(Twin Zebra to Single Zebra)
CB Clamp (Twin ACSR Zebra)
Isolator Clamp (Twin ACSR Zebra), Horizontal Type
PI Clamp (Twin ACSR Zebra)
ACSR Zebra Conductor
Earthmat extension and Grounding of equipments
50 x 6 mm GI Flat
65 x 12 mm GI Flat
Earth electrode, 100 mm Dia, 3 mtr. Long GI Pipe
2 TON capacity industrial type split air conditioning units for control room with automatic controller
Supply of Outdoor LED lighting for switchyard including lighting distribution board, cables, switches, socket, auxilary receptacle, MCBs wherever necessary (12 nos. of 250 W LED lights per Lot)
Supply for Augmentation of 132 kV Transfer Bus from Single ACSR Zebra to Twin ACSR Zebra
Single suspension for twin conductor bolted type hardware fittings
Single tension for twin conductor bolted type hardware fittings
Spacer for twin Zebra conductor
ACSR Zebra Conductor
T connector (Twin Zebra to Single Zebra)
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.09 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.12 MB
BIDVOL1.pdf
Tender Documents • 0.75 MB
BIDVOL2.pdf
Tender Documents • 6.43 MB
BOQ_82039.xls
BOQ • 0.59 MB
NIT.pdf
Tender Documents • 0.11 MB
CORR_TIME_EXT_NOTICE.pdf
PDF • 0.10 MB
CORRIGENDUM1.pdf
PDF • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .