CA NO GE(H)-46/2024-25 SPECIAL REPAIR / REPLACEMENT OF JUNCTION BOXES, BRACKET PVC CABLE AND CONNECTED WORKS FOR STREET LIGHT FEEDER OF GE HISAR MIL STN

Amount

S&F in replacement rigid non-metallic PVC conduit 20mm dia with fittings like tees , bends, elbow, reducer, bell mouth tube ends and fixing accessories such as coupler lock, nuts, saddles, pipe hooks etc complete fixed on wall / ceiling all as specified and as directed.

S&F in replacement FRLS PVC insulated and PVC sheathed 1.5 sqmm 3 core multistranded copper conductor cable from junction box to street light including PVC wire connectors for making connection complete all as specified and directed.

S&F in replacement street light bracket made to shape out of GI pipe 32 mm bore light grade, 1.5 meter length fixed on pole with MS Clamps, nuts, bolts and washers complete all as specified and directed Note- MS flat, nuts, bolts, and washers will be measured and paid separalely under relevant items of BOQ

S&F in replacement PVC junction box suitable for street light of size not less than 350mm x 250mm x 150mm, made out of polycarbonate having front side openable shutter duly provided with locking arrangement and provided with 04 Nos aluminium bus bar of rating 200 Amp alongwith 01 No MCB 6 Amp SP and provision of 02 Nos cable entries, fixed on street light pole with proper size MS clamp with nut & bolt and connected assessories complete all as specified and directed. Note- All incoming and outgoing cable in junction box shall be connected through suitable size glands & thimbles . (ii) MS flat, nuts, bolts and washers will be measured and paid separalely under relevant items of BOQ

M&L for Cross Arms bracings supports, clamps, eye hook and back plates fabricated from structural steel sections including pole clamps stay clamps, D clamps nuts, bolts, washers welding bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

Supply , laying , jointing, testing and commissioning in replacement of size 16 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing in replacement XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including taking out existing u/s cable complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50mm outer dia and 38 mm inner dia complete all as specified and as directed

Excavation in trenches in soft/loose soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

Returning filling in incl spreading leveling watering and well ramming in layers n. exc 25cm thick etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in repair Nature Switch control panel (using Infrared Sensor technology) for Automatic switching of Street Light. The Panel should be suitable enough to take 3-phase load of 5KW. Nature Switch operation should be based on Natural Light Lux level ie required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs to max. 12 hrs.The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable FR grade thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation (i.e. Sensor By-Pass option). The Circuit should be suitable enough to take 3 nos. Contactors of 16 Amps/ phase rating, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of min.10 sq.mm including fixing arrangement i.e 40mmx40mmx6mm angle suitable size of nuts, bolts, washers and PCC work as required complete all as specified and directed

M&L for Boring of holes under road, pavement hard standing by trenchless technology/manual using appropriate meansfor laying of cable complete all as specified and directed.

Supply, install, testing and commissioning of LT Feeder pillar distribution panel board CPRI approved outdoor type, horizontal type, double door system, weather proof, dust and vermin proof, made out on 40x40x6mm angle iron frame and 3.15mm thick CRCA sheet duly powder coated of suitable size with locking arrangement, factory assembled cubicle pattern modular and compartmentalized construction, floor mounted free standing type, 3 phase 4 wire system including wiring with suitable size rated current carrying capacity aluiminium bus bar with epoxy insulated coating with colour code and insulated support, complete with following accessories and suitable for accomodate the following MCB's etc complete and mounting the panel board on ground with PCC(1:3:6) bedding upto height of 30 cm above ground level complete all as specified and as directed (a) 150 Amps aluminium bus bar for all three phases and 150 Amps for neutral - 01 set. (b) MCCB 63A four pole as incoming - 01 No (c) MCB TPN 63Amps 02 Nos (d) MCB SPN 32Amps - 03 Nos (g) Internal All links with copper conductor or solid aluminum bus bar of adequate capacity -01

Disconnecting and taking down from poles existing street light fittings of any type or any watt and size and refixing the street light after replacement the breaket.

M/L for Demolition of path /concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed. Note : The rate inclusive of taking down and refixing of any type of cheqered tiles, interlocking tiles complete as per existing for good make.

M/L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) 150mm thick complete all as specified and as directed

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles complete all as specified and directed.

M/S KAVITA CONSTRUCTION (BID ID -3136264)

P S TRADERS (BID ID -3134415)

M/S SURJIT CONSTRUCTION COMPANY (BID ID -3142858)