COMPREHENSIVE REPAIR/MAINT TO ORS AND JCO MARRIED ACCN OF TSR AND MES JCOS ACCN OF AGE B/R CENTRAL UNDER THE AOR OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Virified Ceramic tiles (Light Shade) 8mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Ditto all as item No.2 but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Double charged Vitrified tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as item No. 4 but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L joint free non - skid Ceramic tiles 7 to 8 mm thick (Coloured) (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450 X 300 X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M&L for Glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick (coloured) of superior quality with highligter tiles fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per above but in riser of steps, skirting, dado and pillar laid over cement and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M&L for Mirror polishing on marble/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

M & L for 15-18mm thick Artificial Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan.

Ditto but of Frame size 65x 125 mm double rebate

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S&F 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and including Extruded board CNC machine cut jali shutter inserted in between sketon and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F stainless steel wire cloth 304 Grade 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed. Make : Prayag,Prima etc

S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. Make : Prayag,Prima etc

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

M&L for 250mm longStainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. Make : Prayag,Prima etc

S & F in repair Door closer hydraulically regulated, aluminum( die cast)body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as directed.

M&L for preparation of new wooden surface of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

S & F bombay sliding powder coated aluminium three track sliding windows, including fabrication of frame size 94mmx 34mmx1.50mm and three track shutters frame size 40mmx 18mmx18mm( two glass shutters of 2mm and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of 4mm thick Glass panes and steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S & F in repair 4.00 mm thick sheet glass fixed in window shutters including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F 100 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F in repair 25 mm stainless steel curtain rod 1 to 2mm thick with designer funnel complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F vitreous china single piece EWC of Size: 360x640x685 mm, Single Piece WC with PP soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, S Trap - 220 mm / P Trap-180 mm complete all as specified and directed.Make Jaquar cat part No SLS-WHT-6851S220PP or SLS-WHT-6851P180PP or equivalent in kohlar, grohe and Roca

S&F vitreous china single piece EWC bowl with cistern for Extended Wall hung WC of Size: 380x630x770 mm,with PP soft seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, S Trap - 220 mm complete all as specified and directed. Make Jaquar cat part No CNS-WHT-353SPPZ or CNS-WHT-755S220SPPZ or equivalent in kohlar, grohe and Roca

S&F vitreous china Sensor Urinal of Size: 340x265x560 mm,wall hung urinal back inlet urinal with DC sensor, removable ceramic waste plug with water seal complete all as specified and directed Make cat part No Aurore of Somany or equivalent in Jaquar, grohe and Roca

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F Repair decorative type WHB Vanity floor mounted made out of coloured PVC board of PVC/HDHMR, wash basin, side cabinet with mirror complete all specified and approved by GE Make: Cat part No. Amara of Parryware or Equivalent in Hindware/Somany/Cera

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca

S&F in repair Maze Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1619 & SHA 455L400 or equivalent in kohlar, grohe and Roca

S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. Cat Part no CAN -1173 of jaquar or equivenet in Kohlar, grohe and Roca

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed Make Jaguar (Cat Part No: AHS-1581H) or equivalent in kohlar, grohe and Roca

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5165 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5005NB or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: OPP-15041PM or equivalent in kohlar, grohe and Roca.

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated EWC Size: 340x515x405 mm, With PP Soft Close Slim Seat Cover, Hinges, Fixing Accessories And Accessories etc complete all as directed. Make: Cart No. AIS-WHT-101551SSPPSM /AIS-WHT-101955P180SPPSMof ESSCO by Jaquar group or Equivalent

S&F in repairs viterous china wash down water closet squatting pan (Squatt pattern) of pattern "long pan:,Size: 450x535x180mm white,Asian Pan with L Bend and Extension, with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including pors trap etc complete al as specified adn directed. Make: Cart No. ECS-WHT-455LE of ESSCO by Jaquar group or Equivalent

S&F in repairs Vitreous China urinals, Size: 330x315x420mm half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing Brass chromium plated bottle traps 32mm bore for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified and directed. Make: Cart No. ECS-WHT-253 of ESSCO by Jaquar group or Equivalent

S&F in repair 15mm dia brass chromium plated Fancy Pillar taps,with Swan Neck Tap with Left Hand Operating Knob capstan heads,screwd down high pressure, with or without lettered Hot or Cold with long screwed shanks anf fly-nutd,screwed for GI pipe and fixed complete all as specified and directed. Make: Cart No. STE-107123 of ESSCO by Jaquar group or Equivalent

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make ESSCO by Jaquar group Cat Part No:STE-107281, Hand shower SAE-1931SH555, flexible tube SAE-547D8 of ESSCO or equivalent.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make: Cart No. ORB-105107 of ESSCO by Jaquar group or Equivalent

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make: Cart No.ORB-105053 of ESSCO by Jaquar group or Equivalent

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S & F in repairs Smart Single Flush Wall Hung Cistern with 39mm Drainage L-bend Pipe with Gasket & Installation Kit PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. Make: Cart No. ALE-CHR-593 of ESSCO by Jaquar group or Equivalent.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.MAKE : NIRALI/IDIAMOND

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as directed MAKE : NIRALI/IDIAMOND

Dismantling of water tanks (RCC Tank/PVC Tank) including disconnecting all connections etc Any capacity. complete all a specified.

S&F rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 15mm bore complete for following capacity of tanks.

S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supplying and laying of GI pipes 15mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supplying and laying of GI pipes 20mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Supplying and laying of GI pipes 25mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sqm) (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area shall be considered for measurement & payment purpose)

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Applying one coat of bituminous primer @ 0.25 Kg/Sqm ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

Supply only water proofing compund as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

M&L for Autoclaved aerated concrete (AAC blocks)for masonry fixed with Ready Mix Jointing Mortar complete all as specied and as directed Makes/brands of Ready Mix Jointing Mortar shall be “Speed Dry Mix”/ “DUBOND”/ “MAGIC BOND”/ BUILDWELL”. Makes/manufacturers of AAC blocks :AEROCON/Ecolite/ ISI marked Grade I as approved by GE

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate ) as in Plinth protection.

M&L for Rendering in 10 mm thick plastering 1:6 on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement) complete all as specifed and directed.

M & L for provide 15mm thickplaster with ready mix plaster on AAC block/Brick Masonry (Makes/brand- ACC’s “ACCOPLAST”/ CK Birla’s “AEROCEN” / Magic Plast /Speed Dry Mix’s “ ECO PLASTER”complete all as specified and directed

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot moulds, moss, efflorescent salts, trading all, greasy spots etc and preparation

M&L for complete removal of existing treatment mechanically and applying Single Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer, including properly making of V shape crakes and filling of all cracks with crakes seal inc. preparation of surface of old decorated wall etc complete all as directed. Make Asian Apex or equivalent.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces all as specified and directed by Engr-incharge

M&L for preparation of plastered surfaces of walls and applying one coat of alkali resistant primer and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for applying 2mm thick wall care putty External/Internal on wall all as specified and directed.

M&L for preparation Old surfaces plastered or unplastered and applying two coat of white washing on ceiling all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel pattern sheet 0.47mm to 0.50mm thick of an colour having tensile strength of 550Mpa and AZ-150 as in roof covering in hexagonal/rectangular/pentagonal shape cladding to wall fixed with self tapping screws as specified. Make: JSW Colouron+

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47mm to 0.50mm thick of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. JSW Colouron+

M&L in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

M & L for Providing high prestress precast ce- ment concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) MAKE :Universal or any Equivalent

S&F for 50 mm thick prestress precast cement concrete M-25 using compound wall (both Side smmoth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) (Note:columns/ poles will be measured seperately) MAKE :Universal or any Equivalent

M & L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement including in quoted rates. No extra payment shall be made.)

S&F for 40 to 50 mm thick precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns.Set in cement mortar 1:4 ,(measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation & mass concrete etc complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5mm grade stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 80mm thickness grey cement and with pigment , M-35 grade including 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade including 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

M & L for prepolished chequered cement concrete tiles 30cm x 30cm x 25mm thick Rubber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan,Sintex/RAJSHREE

S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S&F in repair 12 mm thick toughned glass ( tinted/plain/froasted/film) with openable door of approved design including all fittings such as Bottom patch 163x50x31mm , with Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, Double action floor spring, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long and double action floor spring hydraulically regulatedheavy duty floor door closer of 10 year warranty complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint gobin or equivalent, make of fittings: hafele, hettich or equivalent.

S&F in repairs Toughned glass (10mm in thickness) fixed doors, partitions, windows and similar work including cutting to shape, drilling holes required and fixing the glass on said location with all necessary ss joining cleats and as specified

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

S&F of 5mm thick ACP( aluminium composite panel) sheet on wall/coloumn/roof required to fixed with screws with required any shape icluding joint filled with silicon and approved colour by GE and complete all as specified and directed.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLSH cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLSH copper cable for earth wire complete all as specified and as directed for One light/Fan point controlled by one switch.

All as per Item No-151 above but One light point controlled by two way switches

All as per Item No-151 above but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-151 above but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No-151 above but One bell point controlled by one switch

One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

M&L point wiring with PVC insulated FRLSH 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLSH 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan point controlled by one by one way switch.

(b) -ditto- as above item No but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

(c) -ditto- as above item No 09 (c) but Same board.

-ditto- as above item No 09 but one power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLSH 1100 Volts unsheathed copper conductor 2.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

Supply and fix in repair switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix in repair Bell push button 5 Amp, flush type complete all as specified .

Supply and fix in repair Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & Lin repair for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

M & L in repair for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&Fin repair electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

S & F in repair lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S & F in repair LED Tube rod light double side connection T-8, 18 watt Suitable for 4 feet long frame all as specified and directed.

S&F in repair wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F in repair wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F in repair Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&Fin repair Building security light fittings, with pressure die cast aluminium housing, suitable for 36 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

S&F in repair Surface mounted Comet square shaped/ round LED luminaire die cast body with premium diffucer (Comet squre/ round)with glare free soft light 12 Watt complete pre-wired all as specified and as directed.

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing

S&F in repairs Double door Vertical Triple pole +Neutral DBs, protection class of IP-43, Conforms to IS 8623-1 &3,AS Per IEC 61439- 1&3, Available in CRCA Sheet Metal,provided with insulated vertical phase bus-bars/neutral bars with shrouds/earth bars/sticking saddles/cement spill protector/color -coded interconnecting wire sets/cable ties/ blanking plates and circuit identification labels,with provision for MCCB as incomer and SP/TP Mcbs as outgoings all as specified and directed.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix in repair MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .Make : L&TBB4060B

Supply and fix in repair MCB SPN 32 to 63 Amps, 240 volts complete all as specified and as directed.Make : L&T BB20400B

Supply and fix in repair MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.Make : L&T BB10320B

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No -177 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 177 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

Supplying and Fixing in repair/connecting for service connection/ Garden light connection, 1100 volts weather proof flat twin core Cable PVC insulated aluminium multy sranded conductor of sizes 6 Sqmm 2 Core Complete all as Specified and Directed.

M&L for earthing complete in replacement with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

Note: Amount of sch of credit of Rs.65522/-will be deducted from total amount of BOQ.

CHANDAN CONSTRUCTION CO (BID ID -3319980)

J Sams Contructions (BID ID -3327595)