Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹33.7 L+₹63,589.50 (1.92%)Rejected-AOC | L2 | Rejected-AOC Higher amount quoted than L1 | |
| 3 | L3₹37.0 L+₹3.9 L (11.8%)Rejected-AOC | L3 | Rejected-AOC Higher amount quoted than L1 | |
| 4 | L4₹37.5 L+₹4.3 L (13.1%)Rejected-AOC | L4 | Rejected-AOC Higher amount quoted than L1 | |
| 5 | L5₹38.1 L+₹5.0 L (15.2%)Rejected-AOC | L5 | Rejected-AOC Higher amount quoted than L1 |
Tender Value
₹50.0 L
EMD Value
₹1 L
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_580734_1
8400-911/E8
Open Tender
Civil Works
Works
150 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹1 L
Yes
16 Mar 2023
13 Feb 2023
27 Feb 2023
13 Feb 2023
25 Feb 2023
20 Feb 2023
Amount
Excavation over areas n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed
Demolition of concrete (reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
M&L for cement concrete (1:3:6) Type C2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete, complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 7.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and directed.
M&L for formwork to sides of concrete, foundation, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work including vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC M - 25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M - 25 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for cast- in- situ cement concrete in Type B1 1:2:4 (using 20 mm graded stone aggregate) in lintels up to 1.5 m clear span, cills,steps and other similar bands, plinth courses, string courses and railings up to 60cm in height ,copings, apex stones,kerbs and the like including weathering ,slightly rounded or chamfered angles and throating as desired complete all as specified and directed by the Engr-in-charge.
Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement with WPC as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
S&F reinforced concrete pipes ,class NP2, 300 mm bore laid and jointed in trenches or in floors complete with collar complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as specified and directed.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engg-in-charge.
S&F wire netting of galvanized steel wire 1.40 mm dia and size of mesh is 25 mm fixed properly with suitable nails at various locations in wall , beam, chajja, facia, slab, lintel etc along PVC pipe complete all as specified and directed by Engineer in Charge.
M&L for machine pressed precast prepolished concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed
M&L for 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded stone aggregate) finishing the surfaces even and fair complete all as specified and directed by Engineer in Charge.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for broken stone hard core gauge n.exc 63mm deposited, spared and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.
Supply only Integral Water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated soil to a distance n.exc.50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out as in soft/loose soils complete all as specified and directed.
S&F mild steel posts and struts in fencing including cutting tops to shape as directed ,drilling holes , notching for wire,etc , flat iron fillets ( for securing wire mesh etc.) top section fixed including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Supply only GI chain link fancing 75 x 75 mm (minimum dia of wire 3.5mm), fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc complete all as specified and directed by Engr-in-Charge. (Note : Fixing of chain link fence will e measured and paid separately).
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. (Note : Chain link fencing will be paid separately).
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screw other and each screw end to be fixed with washers and exc 5 cm but n.exc 10 cm long complete all as specified and directed
M&L for cement concrete (1:4:8) Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.
M&L for brickwork with modular fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:6) complete all as specified and directed
M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat of alkali base primer complete all as specified and directed
Surface excavation n.exceeding 30 Cm deep and averaging 15 Cm deep and getting out in soft/ loose soil complete all as specified and directed
M&L for brickwork with modular fly ash bricks, straight or curved on plan.exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed
M&L for extra for forming fair finish drain channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed
Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.
S&F mild steel posts and struts in fencing including cutting tops to shape as directed ,drilling holes , notching for wire,etc , flat iron fillets ( for securing wire mesh etc.) top section fixed including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M&L for PCC (1:2:4) 100 mm thick Type B1 (using 20 mm graded stone aggregate) used as in floor/pavings and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for 25 mm thick prepolished chequered cement concrete tiles of approved size, set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per specification.
S&F framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
S&F pre- painted galvalume aluminum zinc coating @ 150GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying with three coats of white wash on walls complete all as specified and directed
M&L for PCC (1:3:6) 75 mm thick Type C2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings complete all as specified..
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed.
BISWAS ENTERPRISE
M/S GLOBE ENTERPRISE
subash chander bahl
SYED ATAUR RAHMAN
SAIBABA ENTERPRISE
Jaibalaji Enterprise
M/S S M ENTERPRISE
M/S SWAPAN KUMAR MONDAL
PEARL CORPORATION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .