Town Hall Construction Work in Nagar Parishad Area, Karauli, Distt. Karauli

CIVIL WORK (BUILDING) -

Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification.

Providing and fixing of uPVC casement fully open-able windows (outward / inward) manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. Frame shall have ‘O’ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter.

Providing and fixing of openable uPVC Doors with or without fix top manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made of Extruded uPVC Window Profile Section of size 70 x 60mm having outer wall thickness of 2.75mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the corners shall be mitered cut & thermal welded so as to form door frame. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided for the top fix portion of the doors or in case of the doors having more than two openable shutters, as per the requirement / drawing. Frame of openable door shall have ‘O’ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Shutter : The shutters of openable door shall be made of 106 x 60mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm)

Providing and fixing Structural glazing work with toughened glass of 6mm thick and reflective colour as approved in dark shade like Blue/Dark Blue etc. with frame work of curtain section 65x60mm (Weight 1.64 kg/m min.) made of aluminium with chrome plating. Internal frame work will also be of curtain section 65x60mm of chrome plated aluminium section with20x20mm aluminium tube section and structural spacer made of rubber. The aluminium frame work size as per instruction of Engineer-in-charge and including openable panels with all necesary sections and fitting.The work include silicon structural adhesive for complete gripping of glass with framing members and silicon weather seal sealant to prevent moisture/water through joints. Glass will be fixed in plumb and with uniform spacing of 10-12mm wide duly filled with silicon weather seal sealant. The work includes all labour,scaffolding , structural aluminium work, toughened glasses,silicon weather seal sealant, silicon structural adhesive structrucal spacer, all accessoreis like handles, peg stays, M-15 grade cement concrete for fixing holdfast .(Face area of glass shall be measured)

Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : ISI 9 mm teak ply one side BWR

Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :12mm thick Acoustical Board

Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. With 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of maste pieces as per required point as per approved design of Engineer incharge.

Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. To vertical joint between RCC columns, bricks & stone masonry in size 40 mm width and 12 mm depth, including providing back up material (Thermocoal foam) if required.

To joints in flooring, as per drawing with first layer of poly sulphide sealant in size 20 mm width and 10 mm depth over PE Foam and then providing polyethylene foam back up rod 25 mm dia size and finally providing another layer of poly sulphide sealant in size 20 mm width and 10 mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge.

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)

Providing and Fixing Chiken wire mesh at the joint of masonry members/R.C.C. Members with Nails complete in all respect.

Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

PUBLIC ADDRESS SYSTEM Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/ Poly Crystalline silicon solarcells, netmeteringfacility, necessary protections, earthing, mounted on Aluminium/ GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/ IEC61215, IS/IEC61730- Part-1,IS/IEC61730- Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400VAC, three phase, 4 wire, 50Hz+/-2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0to50 degree C.ThePCUshalladjustthevoltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and out going cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired.

Supplying & fixing 63 mm dia stainless steel IS : 3444 Gr. - 1 branch pipe with 20 mm (nominal internal diameter) size Gun metal nozzle confoming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS ;926

SITC of Local fire authority approved single stage Centrifugal End suction, back pull type Terrrace pump with Bronze impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads.along with suitable rating Control panel as per rating of Motor including 4 pole MCCB, automatic star delta starter, Single phase Preventor , overload protection rely, contactors, MCBs , interlocking wiring , ferruling etc complete in all respect. 900 LPM with 35 mtr head

Providing, installation, testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia holes with stainless steel flange of following sizes. 100 mm dia

150 mm dia

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).

SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. 150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 10.0 HP, 3-Ø, (93-200)Mtr, (240-60)LPM

Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes. 16mm (suitable above 50mm & up to 75mm OD pipe)

P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. 10.0 Sq.mm 3 core flat / Round

Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings 50 mm OD 6 kg / cm2

Supply and fixing of oil / Air break DOL / Star Delta Starter made out of sheet steel powder coated enclosure with single phasing protection, ON / OFF push buttons, etc. complete in all respect suitable for following rating motors. DOL Starter 15.0 HP

SITC of ISI mark( IS:8472) Centrifugal monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 2880/ 3000 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 2.0 HP, 1-Ø, (8-26)Mtr, (318-130)LPM

Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10m height with 20 to 30 mm thick Red Sand Stone (Karauli ) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing by means of cramps which shall be paid separately)Exposed face machine cut

Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra)

Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design).

150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete

Push Back Auditorium Chairs with Sizes: Center Center Size: 24" Back to Back Pitch is 925mm - Fire Retardent Fabric & Application of Extra Coating of Fire Retardent Treatment on PU Foam Cushion No Wood & No Plywood F A B R I C:Teflon Coated Fabric ( Water / Oil Repplent)Anti Fungus & Anti Bacterial Treated Heavy Gauge Prime Steel Construction Weld Less Seam Less Seat Supporting Tray Jerk Free Push Back Movement Epoxy Powder Coating Paint.

Providing and fixing of 12.5mm thick GR gypsum board as per design drawings on the frame work made of special powwr pressed from MS sheet and galvanized in accordance with zinc coating 120as per zis 277 and consisting of angle cleats of size 25 mm x 16mm with flanges of 22mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fasteners 12.5mm dia an d40mm long with 6mm dia bolts or suitable MS clamps made up of MS flats of 30x 5 mm to be fixed to tie members of truss all having nut and bolt arrangement to the angle hangers of 25x19x0.5mm of required length and other end of angle hanger being fixed with nut and bolts to GI channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 2+6mm each having clips of 10.5mm at 450mm center to centre shall be fixed ia a direction perpendicular to GI channel with connecting clips made out of 2.64mm dia 230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimeter cannels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive screws @230mm interval including jointing and fixing to a flush finish, finishing with recommended filter, paper tapes, finisher and two coats of primer as per manufacturers specifications.( Ecoton/ Acoustical system)

Providing and fixing of 20mm thick wood wool acoustical tiles over the suspension grid having density of 400kg/cum over the existing suspension grid. The tiles to be given 2coats of black enamel paint. Complete as per drawing, specifications and direction of E/C

Providing and fixing of inherently fire retardant fabric (CS Travera) panel (colour as approved by the consultant) glued to 25mm thick melamine foam (BASF, Germany) overa 12mm marine ply fixed over a framework of 48mm GI stud of 0.55mm thick gypsteel ultra @ 600c/c vertically & 1200C/c horizontally fixed in GI floor channel fixed at floor bottom & top RCC slab. the marine ply to have perforations as per design drawings. The foam to be backed with 50mm 1000GSM thermal bonded non woven polyester wadding. The fabric to be fixed with measn of UPVC grippers. The rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour, and fixing as per drawings. the work shall be executed as per specifications and at all heights and as per direction of Engineer-in-charge.

Providing and fixing of 1mm thick laminate glued to 6mm commercial ply and 8mm commercial ply as per the design drawings of reputed make ;like century, duro, merino fixed over a framework of 48mm GI stud of 55mm thik gypsteel ultra @ 600c/c vertically and 120c/c horizontally fixed in floor channel fixed at GI floor at bottom and top RCC slab. The framework shall be filled with 50mm thick thermal bonded polyester nonwoven polyester wadding fiber of 1000gm/sqm. The wadding shall be of Mikasha International/Dupont. The framework to be supported on the wall at the interval of 1800mm centre to centre with 35x35x3mm angle cleats/fasteners of required length and MS anchor fasteners of size 65x10mm dia. The cleats to be given two or more coats of red oxide primer. the rates includes for all geometry of walls, openings etc. and for complete item including all the required approved material, labour and fixing as per drwings specificstions and execution of item at all height and as per direction of Engineer-in-charge.

P/f of 75x 15mm MAPLE wood slats at an air gap of 15mm fixed @ 90mm c/c backed with viola cloth fixed over a framework of 48mm GI stud of 0.55mm thick gypsteel @ 600c/c. The framework to be filled with 50mm thick thermal bonded nonwoven polyster wadding micron fibre of 1000gm/sqm. The mikron fibre to be held in position with chicken mesh of 18mm &24SWG. The mikron fibre shall be of Mikasha International zthe framework to be supported on the wall at a distance of 1800mm c/c of size as required long 35x35x3mm angle cleats of required length and MS anchor fasteners of size 65mm x 10mm dia. The cleats to be given two or more coats of red oxeide primer. The entire work to be executed as per the drawings/instructions of the E/c. the rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour and fixing as per drawings enclosed. The work shall be exexcuted as per specifications, & instructions of E/c. Melamine polish on the slats to be payable separately.

Proving and fixing of 20mm thick wood wool acoustical tiles over the GI channel and grid having a density of 400kg/cum over the existing suspension grid. The tiles to be given 2 coats of black enamel paint.Complete as per drawing, specifications and direction of E/c in walls.

P/f of 100x18mm steam beach wood kiln seasioned chemically treated planks with tongue & groove joints. Steam beach planks to be of minimum length 1200mm. The steam beach wood planks to be fixed over two staggered layers of 1200 marine commercial ply of approved make like Century, Duro, Green. Merino fixed to Sal wood frame work of 50x50mm at 600mm centre to centre both ways. the Sal wood shall be kiln seasoned and chemically treated. The framework to be jointed with mathani cut method. The Sal wood frame work to be treated with two coats of fire retarded primer FR881 undiluted @ 3.5 kg per ltr. The framework to be supported on 100x100x5mm neoprene pads whicha re held in position by 35x35x4mm angle cleats of 100mm length at 1800mm centers. The framework to be filled with 25mm thick thermal bonded polyester wadding mikron fibre of 800 gm/sqm mikron fibre. The mikron fibre shall be of Miksha International or equivalnet company as approved by E/c. The cleats to be given two or more coats of red oxide primer. wood floor

P/f of MS suspension grid providing and fixing MS angle rafters above acting arae if stage at 1200x600mm centers 2x40x40x4mm thick. MS angle runners & 25x12x12mm thick studs as MS spacers fixed @ 600mm c/c sandwitched between the MS angle runners so as to maintain 12mm gap between MS angle. The grid so formed to be suspended from bottom of roof structure by means of 35x35mm thick. MS flat suspender, fixed with MS cleats & dash fasteners at RCC slab & nuts & bolts at 1200mm centers to the grid. Painting MS suspension grid & suspenders with 2 coats of red oxide primer and 2 or more coats of enamel paint of approved shade.

Providing and fixing 22 oz. loop pile carpet(Capital,Unitex or eq.) with precision tufted loop piles and underlay of 6mm thick PU foam fixed to existing levelled floor with synthetic adhesives as approved by the manufacturer.

Supply of main curtain motorized curtain control system with horizontal sliding arrangement complete with fixing, rails, barckets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3mm steel wire rope, 1HP motor ( Crompton) 2nos air breaker contactors (L&T) 2nos, micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtains should be draped to half area when in closed, stiched in double gathering (velvet Raymon cloth)

Supply of middle curtain motorized curtain control system with horizontal sliding arrangement complete with fixing, rails, barckets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3mm steel wire rope, 1HP motor ( Crompton) 2nos air breaker contactors (L&T) 2nos, micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtains should be draped to half area when in closed, stiched in one and half gathering with mossy cloth.

Supply of cloth wings made out of black glazed cotton cloth on one side of MS 50mm x 25mm x 16G pipe welded frame work. The pipe framework made out of 25mm x 50mm pipe fixed with overhead pivoted track complete with duly painted on both framework

CYCLORAMA CURTAIN :-Supply of cyclorama curtain with PVC perforated screen. The screen to be fixed on tubular frame made out of 32mm dia MS pipe

Supply of suitable size average frills made out from black glazed cotton cloth duly stitched in doube gathering.

Installation Charges

Supply of FTB Line Arrey Compact Bass reflex active line arrey - 2x10" +2x1" - 600 W rms Classs D amplifires , 600W RMS to the LF, comperession drivers with 1" throats DSP on board with 8 Present 90 Degere horizental waveguide up to 18kHz control pannel with XLR " in&link", HF level,Present,HP filter,GND lift switch Hingh SPL capability : 130dB Integrated rigging hardware Compietely Manufactured in Itly (FBT-Muse-210LA/D&B?MAYAR SOUND)

Supply of active sub woofer 1200W -139dB SPL Compact Hybrid band pass cardiod-arrayble sub woofer. Hybrid Configuration permit to be obtain extention and speed of vented with high SPL and acoustic filtering of bond pass suspention hardware fully compatible with MUSE210La allowing the enclosure to be suspended front or rear-firing for easy cardioid confriguation subwoofer can be suspended tacing foeword or rearward and user -confreguation with capability of front-or rear -mounting the grill and amp moudle for arstheic unifornity on cardioid confriguation. Very Large area laminar -flow port to ensure no power compression and very low port turblance for cardioid confrigurations with one SUB rear -firingand two sub front-firing more than 15db SPL rejection can be obtained behind the arrey 18" (460mm) coustom B&C neodymium magnet high excursion woofer with 3" (75mm) voice coil Frequency Responce from 33Hz to 100HZ Class D amplifier delivering 1200WRMS Switch mode power supply DSP with 8 presents. cardioid and with infra confriguration . delay conrol pannel with XLR input and link, volume , present, delay , phase 0 degre - 120 degere ,ground-lift 5/8" (15mm) birch plywood encloser scratch resistance black paint Low frequency extention cabinate for the MUSE210LA line arrey for flying or ground stacked confrigurations. Very low profile for a 18" size woofer Its possible to order Muse 118FSCA model that's the version already facetory preconfigured as rear facing for cardioid application ( MOUDUS-215FSA)

Supply of Flying bar Muse210

Supply of stage monitor 2 way bi-amp bass reflex design 400+100W rms class D amp 60Hz-20KHZ freq resp. 12 DegreB&C coax custom woofer 1" B&C HF driver DSP 4 Present 100dB SPL max Disp 90 digre gap-injection polyproup molded enclosure (FBT-STAGE MAX 12MA) D&B MAYAR SOUND

Supply of graphies equializer 3 F band Dual 3 t band 1/3- octave Constant Q frequency band Switchable boost/cut range of +- 12 dB Front panel bypass switch 12dB input Gain range 4-segment LED ladders for monitoring input levels XLR and TRS Input and output Frequency Responce of <10-HZ to> 50KHz Dynamic range of grater than 108dB (DUX-231DOD/BSS)

Supply of Carded microphone The Shure SM58 undertrail (cardioid ) Dynamic vocal microphone is designed for proffessional vocal use its live performance sound reinforcement and studio recording , its has afailored vocal response for a sound which is a world stapdard for nfor singing on speech A highly offcycliye built-in spherical filler minimizes wind and breach "high" noise .A cardioid pickup pattern isolates the main sound source while optimizing unwanted background noise .(Share-SM-58/Secnsions-THI)

Supply of Instrument microphone the legendary shure SM57 microphone is exceptional for musical instrument pickup and vocals. With its bright, clean sound and contoured frequency response, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. (Shuru-57/Sennheiser/FBT)

Supply of Hand C/L Microphone the SLX24/SM58 Handheld Wireless System is part of the SLX wireless system family. SLX wireless systems are powerful wirless tools that can be setup quickly and used confidently by installers and working bands. Features include auto frequency scan with transmitter setup, exceptional wireless clarity and shuru patented audio reference Companding (shuru-SLX 58) Sennheiser/FBT

Supply of Podium Microphone Microflex Standard Gooseneck Microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacment and available in cardiord, supercardioid and omnidrirectional polar petterns. the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide veriety of applications, such as houses of worship, courtrooms and conference centers. Plus the condenser cartridges fit every model in the Micro flex product line for enhanced convenience and consistent sound, (Shure-MX-418de/Sennheiser/FBT)

Supply of Audio Mixer Sound crafts Mono inputs-32 Cb, Stereo Inputs-2 Ch, Sub Group-4(paired sends), Maste4r Outputs-L/R + Mono, Eq- 2fixed, 2 Swept, Filters-100HzHPF,AUX Sends-6(4Pre/Post). FX Returns-2, (Sound crafts-LX7ii32)

Supply of 2.5Sqmmx3 core cable (Finolex/Polyeab/Incol)

Supply of microphone cable for mick pomt(PLS/Krystal)

Supply of Microphone connecting box 8 mick each box with neutrick XLR/PLS

Supply of Socket box with 15 Amp socker (Customised)

Supply of MCB box 24 way with 16 Amp MCB & 125 Amp MCCB L&T &Havels)

Installation,testing, commissioning charges

Supply of LED spot light 150W cube LED current drive 5Amp colour temperature 3200K input voltage 100-240V A/c on board 4 digital display 2 ch DMX protocol, Aluminium hanging, cooling fan with P/c lens (PLS-LED PC)

Supply of LED Fresnel light 150W cube LED current drive 5 Amp colour temperature 3200K input voltage 100-240V A/c on board 4 digital display 2 ch DMX protocol, Aluminium hanging, cooling fan with P/c lens (PLS-LED FRESNEL)

Spply of Led profile 150W voltage -90-250V/50-60hz, working position: and safe working position, lamp: super high power LEDs; white 180W (cool white or warm white) average life time is over 5000h, CRI>90, lens angle 19*/26*/36*, optional, LED display channel-2 Ch, IP rate : IP 20 indoor, special zoom function with manual adjustment, control mode: master/slave synchronization, DMX 512 control and automatic, run, construction die casting aluminium housing silver white and black, optional (PLS-LED profile 150)

Supply of LED cyclorama flood light 48x3 W each LED RGBW led projection lighting product. It can change colour with accurate and uniform light distribution. The projecting angle and position are alternative so the best light effect can be achieved. The multi row high power LED wall washers are used for decorative lighting and light or wash walls of building, club hotels, stages parks plazas commercial building facade, art galleries etc (PLS-4803)

Supply of 1.5 sqmm 3 core shilded wire (National/Kalinga/Indo)

Supply of cable tray 40x100x16swg painted.

Supply of light socket box 4"x4" with 15 Amp multi socket.

Supply of side light ladder of 25mm x 50mm MS tube size (6'x2')

Supply of 50 mm OD GI pipe B class for lighting grid & lighting bar to be hang from top with support of clamps. (make- Jindal/Tata)

Supply of Leds 3W 15 degree (12 red, 12 green and 12 blue), 4 digital supply. There dimmer manual mode, running, strobe, speed adjustable, adjust the data with a power saving, boot automatically recover data, DMX 512 protocol - 8 DMX channels, Main dimmer, RGB colour changing, Strobe effect, auto play with internal programs, Master/Slave function, Stand slone mode, power supply, AC 100V-AC240V 50/60 Hz, Light power connect maximum range 15pcs to 30pcs, consumptions 115W, waterprrof IP65, weight 5kg (PLS-PI-3603)

Supply of moving Head sharpy light 230W, power supplies 110-240V 50/60Hz, input power, lamp source discharge lamp with a Short arc burner in a reflector system - Type: YODA MSD Platinum 7R, -Output Lamp power: 230W-Colour temperature 8500K, - Average life 2000h Optics, 3-lens optical group combination, Focus: electronics light ouput at 20 metres (65 feet): 59760 lux, color system Interchangeable colour wheel with 14 colours + open effects section, I interchangeable gobo wheel with 17 fixed gobos + open, High speed shake effect effect, 8-face rotating prism Sharpy 23, frost filter, Mechanical shutter and adjustable speed strobe effect, mevvhanical dimmer, control and programming 16 DMX 512 control channels, display: LEd RED Display pan/ Tilt Resolution: 16 bit, Movement Control: vectorial DMX signal connection: 3 PIN output, BODY, Aluminium structure with die-cast plastic cover. Two side handles for transportation. Device locking PAN and Tilt mechanisms for transportation and maintenance. Moving Body Travel:- PAN = 540 degree - Tilt = 50 degree Electronics, Functions reset from the lighting desk On/OFF lamp control from the lighting desk "Autotest" function from menu Electronic monitoring with status error Safety Devices bipolar circuit breaker with thermal protection. Automatic break in power supply in case of overheating or failed operation of cooling system. Forced ventilation with axial fans. Hanging system: with fast lock omega clamps (1/4 turn) on the base (PLS SHARPY-7r)

Supply of DMX Splitter 1 in 8 out (Make DL&MC)

Supply of LED wash light 8watt x 24 LED cube light RGBW with IP 65 with bracket (PLS-244)

Supply of MCB box with 16 Amp MCB for 36 way direct point LED/Sharpy (Custom)

Supply of H.M.I. Follow spot 1200W with stand & controller (PLS-PI-1200FS)

Installation charges including connector cables.

Supply , Installtion , Testing and Comissioning of armoured 6 core Singlemode OFC cable for interfloor switches connectivity. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of 6 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of 24 port loaded LIU for with LC adaptor plates , pigtel cables for core switch to access switch connectivity over fiber. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of LC-LC singlemode fiber patch cord for LIU to switch connectivity. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of CAT6 information outlet (I/O) for Camera at user end. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of loaded 16 port CAT6 jack panel for CAT6 cable termination at rack end. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit

Supply , Installtion , Testing and Comissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Approved Makes: Der Wiser/MTS/Rittal/APC/APW

Supply , Installtion , Testing and Comissioning of Weather Proof Outdoor Enclosure suitable for LIU ,PDU & Switches. Approved Makes: Derwiser/MTS/Rittal/Nexxus/APW

Supply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support upto 128GB , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection(deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE. Approved Makes :Allgovision/ Impulse / Avigilon / Cisco/ Axis

Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE. Approved Makes :Allgovision/ Impulse / Avigilon / Cisco/ Axis

Supply, installation, testing and commissioning of 3 MP PTZ Camera , UL,CE,FCC Certified , ONVIF profile s , triple stream or more,4.3 to 129mm focal length , 30 X Optical Zoom , 12 X digital Zoom ,Frame rate : 25 fps @ 3MP ,50 fps @ 2 MP ( main stream ) ,Shutter Speed : 1/3 - 1/10,000 s , inbuilt IR LED for night vision ,triple stream or more, IR distance upto 100 mtr or more ,upto 20 privacy masking , 2D / 3D noise reduction ,120 dB WDR , 360 deg endess pan , tilt -15 to 90 deg , auto flip support ,80 presets ,Auto pan ,Edge analytics : Intrusion detection , tamper detection , loitering , abandoned object , SD Card support , Auto white balance, Auto iris , Alarm : 2 IN , 1 Out , IP 66 weather proof , Power : 24V AC/ POE+ / POE. Approved Makes :Allgovision/ Impulse / Avigilon / Cisco/ Axis

Supply, installation, testing and commissioning of 64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000 ,A.I maximum captured quantity 200,000. . UL,CE,FCC certified. Approved Makes :Allgovision/ Impulse / Avigilon / Cisco/ Axis

Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP

Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung

Supply, Installation, Testing and Commissioning of 24 port Fabric (SFP) switch with 20 Nos. of 20 100M/1G SFP Port , 4 Nos. of GbE RJ45/SFP Combo Port , 4 Nos. of 1G/10G SFP+ Port ,1 X Console , Switching bandwidth 128 Gbps , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server. Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus

Supply, installation, testing & commissioning of manageable PoE+ Layer-2, 16 Port 4uplink port 10/100/1000 copper ports Base-T rack mounted switch, Web user, traffic manage HTTP/HTTPS web brows minimum IE5.5, Cat-6 RJ-45 connector supported, including 2 port 1G SFP module, maximum 75W power consumption. inbuilt fan, Storage temperature -200C-700C, Operating temperature 00C - 400C, Operating humidity 10% 90%, Complete with all rack mounting accessories for completion. Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus

Supply, Installation, Testing and Commissioning of Industrial grade switch 8 x 10/100/1000Base‐T Ports POE , 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 240W , 8K MAC address table , Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , Dash board , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 30 protection , DIN rail for wall mount , OPerating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .Certifications : IEC 60068-2-6 ,IEC 60068-2-27 ,IEC 60068-2-32 ,EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 ,EFT, EN61000-4-5 Surge, EN61000-4-6 CS, EN61000-4-8 PFMF ,FCC Part 15 Class A, (EN61000-3-2, EN61000-3-3,EN61000-6-4, EN61000-6-2, EN55022 Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus/Arista

Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base‐T Ports POE + 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 120W , 8K MAC address table , Ring recover time < 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , traffic monitoring , Cable diagnostics , UL,CE,FCC Certified , IP 40 protection , DIN rail for wall mount , OPerating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC . Approved Make :Cisco/ Impulse / Juniper / Extreme/ Nexxus

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO

AIR COOLED SCROLL CHILLING MACHINE WITH MICRO-PROCESSOR BASEDCONTROL PANEL

Supply, Installation,Testing and Commissioning of Air - Cooled Scroll Water Chilling Machines of 90 TR ( Actual ) with Scroll Compressor at below mentioned operating conditions with R - 410 / R 407C refrigerant , semihermatic / hermatically sealed compressor , driven by suitable KW Sq. Cage induction motor complete with Air - Cooled condenser with Copper Tube and Aluminium Finned, insulated chiller, flow switch at chiller outlet, refrigerant piping, refrigerant & oil (First Charge), Microprocessor based control panel, incoming switchgear, starter vibration isolators & other accessories etc. All mounted on M.S. frame. The compressor motor shall be suitable for 415 volts ± 10%, 50Hz ± 5 %, three phase A.C. Entering Air Temperature - 42.2 ºC / 108 º F Chiller CHW IN - 12.22 º C / 54.00 º F CHW OUT - 6.66 º C / 44.00 º F

Supply, installation, testing and commissioning of Verticle Inline chilled water centrifugal pumpsets with bronze impeller for chilled water recirculation complete with outside type mechanical seal, TEFC Sq. Cage induction motor with class "F" insulation, mechanical seal etc. conforming to techinical specification and as per following parameters. The chilled water pumps shall include thermal insulation & cladding. (Company Assembled & Factory Fitted). The pump shall be PN 16 rated Chilled Water Pumps Capacity of each pump (LPM) 635 Pump Head (Mt) 38.0 Proposed KW of Motor 3.7

Pressure Maintaining System Supply,Installation ,testing and commissioning of Pressure maintaining system comprising of :- Unpressurised closed expansion tank of M.S construction with interchangeable Synthetic rubber bladder working at ambient pressure with following accessories :auto air vent,Level transducer and drain connection confirming as per specifications and of below capacity. For chilled water application, it will be insulated with 50mm thick insulation to the specifications and cladded with 26G-aluminium cladding.Pressurised closed expansion tank of M.S construction with interchangeable Synthetic bladder working on nitrogen pressure with following accessories Pressure gage, Safety valve, conforming as per specification and of below capacity. For chilled water application, it will be insulated with 50mm thick insulation to the specifications and cladded with 26G-aluminium cladding. Capacity of 100 litres PN 16 (CET-C-100, PN16) Pressurisation unit comprising of two multistage high pressure pumps(1 working +1 standby) with control panel with soft starters,valves and other accessories as described in detailed specifications.The pumps shall be able to deliver at least 2 CMH flow at suitable pressure head. Model PMS-260, PN16 Flow 2 CMH Head -- 60 Meters

Double Skinned Floor Mounted Air Handling Units ( Pre & Fine Filter) Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Floor Mounted type fabricated out of extruded aluminium section consisting with 0.8mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.8 mm plain alvanised steel sheet inside with blower, blower section and Blower shall be DIDW Forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil made of Aluminium finned Copper tube ( thickness 0.50 mm) with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90% ( MERV 8), & Fine- filter section with non woven synthetic media of 3 micron particle size with an efficiency of 95% ( MERV 13), polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 40 mm thick & 38 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specification. The face velocity across cooling coil shall be limited to 152 MPM maxm.The capacity of Air-handlers shall be as follows: (For AHU No. Please Refer Basic Of Design & AC Tender Drawing ) AHU Static Cooling Motor Coil Area Filter Cap. Pr. Coil Row KW SMT CFM mm of WC Deep 15000, 65 mm , 6 Row, 10.0 3.53, Pre, Fine

High Rangeability 3 way Control valve Supply, installation, testing and commissioning of complete set of High rangeability control valve or Pressure independant control valve, kit comprising of Two Way Control Valve of Brass construction rotary / ball type for DN15 and DN32 of PN25 rating with screwed connections. DN 40-DN150 shall be C.I body of PN16 ratings, motorised modulating actuators with linear stroke of minimum 15 mm, LCD display digital controller(BMS compatible),three nos NTC sensors with complete wiring with in AHU room,one thermowell,one power supply unit of 230Vac/24Vac.Control box for mounting Digital controller and power supply unit and 10 Amps Double pole MCB should be also provided.The valve size shall be suitable for pipe size/coil TR capacity. (Make - Anergy/Belimo/Siemens) 65 mm dia

DUCT MOUNTED UVGI SYSTEM :-

Supply, Installation, testing & commissioning of Duct mounted UVGI Sytem. The UVGI System is designed to achieve Kill Rate not less than, 3000 μwsec/cm² to achieve kill rate at least 99.0% (Log 2) .However, it shall be suitable to achieve kill rate of all air borne mold, spores, bacteria and viruses, at varying extent of kill rate. The entire UVGI System shall be self-contained unit, with all components factory assembled in one neat compact package, suitable for duct mounting. All metallic components in contact with air (wetted parts) shall be of SS 18 G thick. The outer frame that attaches to the ducting shall be 18G CRS and powder coated. Entire. The UV tubes shall be of super high output of 800 mAmps each. Special interior coating shall be provided to the lamp to extend lamp life of 9,000 Hours based on Switch Rate of 3 per day. The lamp shall deliver energy not less than 3000 µW-Sec/cm² within UV wavelength 253.7nm. System design shall cover at least 90 % of duct width during calculation. All UV lamps shall be covered in quartz sleeve ( GE214) for environment protection. All UV lamps shall be covered in quartz sleeve for environment protection. System shall be UL listed for 1995 and 2043 for safety. Ballasts shall be electronic type, rated for greater than 15,000 starts, and confirm to Sound Rating A.The Ballasts shall meet FCC Part 18 (Class A) for EMI and RFI non consumer limits.The Ballast shall be listed to UL 935. The UVGI assembly shall be provided with suitable flanges to mount it in the chosen duct section. The outer casing shall be provided an On/Off Switch. A Timer and Indicating Lamp shall be provided, to signal lamp change-out when the full lamp life is reached. The entire system shall be provided with interlock to shutoff the lamps in the event the duct section is opened. The operating voltage shall be 220V, Single Phase, 50Hz . The equipment shall be properly grounded. Duct Mounted UVGI System for following Air Flow's 15000 (F/M AHU)

SITC of air cooled ducted split air conditioning machine with each having a capacity and details as mentioned below suitable for operation on refrigerant comprising of Scroll / Rotary / Reciprocating type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine isolation / disconnect switch as per specifications, Suction line insulation with minimum 19 mm thick polyvinyl rubber insulation, Refrigerant piping up to 10 Mtr. valves and accessories to inter connect compressor and condender including pressure testing, vacuum. Pipe shall be hard drawn copper, Necessary starters suitable for compressor motor complete with O/L , U/V, phase reversal protection, single phase preventors etc complete as required. 8.5 TR With Scroll Compessor

11.0 TR With Scroll Compessor

SITC of Air Cooled split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 4 Mtr (IDU to ODU), R-22/R-410 Refrigerant, Remote, suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / reciprocating / rotary compressor as specified. 1.0 TR Split Unit

1.5 TR Split Unit

2.0 TR Split Unit

2.5 TR Split Unit

INSULATED CHILLED WATER PIPING ( Expanded Polystrene Insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100mm dia. (50mm thick insulation)

80mm dia. (50mm thick insulation

65mm dia.(50mm thick insulation)

25 mm dia(50mm thick insulation)

INSULATED VALVES

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately upported as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified 100mm dia.

80mm dia.

BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. 100mm dia.

80mm dia.

NON - RETURN VALVE with duel plate of C I body SS plates anized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified. 100mm dia.

Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. 100mm dia.

80mm dia.

Providing and fixing in position the industrial type pressure gauge complete as required

Providing & fixing in position the mercury in glass industrial type thermometer complete as required

Supply , installation , testing and commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting 25 mm thick EPS insulation etc. as required conforming to standard specifications and of following sizes. 40 mm dia pipe

50 mm dia pipe

Supply, installation, testing and commissioning of common pressure guage across the chilled water supply / return to AHU only as per specification.

Supply, installation, testing and commissioning of auto air vent valve of following sizes:- 12 mm dia auto air vent valve

DUCTING, GRILLS,DIFFUSER AND INSULATION

SITC of ducting made from GSS of class VIII & fabricated as per IS:655 and as per approved drawings & designs including the cost of hangers, supports , angle , expansion fasteners , closed cell neoprene gasket T&P etc. as required of following gauge: 0.63mm (24 G)

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Damper

Actuator

Supplying & fixing of powder coated Linear extruded aluminium Supply / Return Air Grills with aluminium volume control dampers as per specifications. 150 mm

Supplying & fixing of Fresh air intake louvers with bird screen dampers (Aluminium extruded only).

Supplying and fixing of acoustic lining of duct with Open Cell Nitrile Rubber density 140-180 Kg/m³. Applied by Adhesive, conforming to standard specification. 10 mm thick open cell nitrile rubber.

15 mm thick open cell nitrile rubber.

Supply & Installation of Thermal Insulation on Ducts not exposed to sunlight using Closed Cell Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.037 W/mk at 20 Celcius Mean Temp. and µ≥7000 (without any additional vapour barrier) and with factory laminated aluminium foil of minimum 60 Microns thickness having weight of 193 gsm as per EN ISO 2286-2, tensile strength shall be 90N/15mm as per EN ISO 527-3 with elongation > 10% as per EN ISO 527-3; to be applied on Ducts using manufacturer's recommended Rubber based Adhesive in a blend of Solvents. 19 mm

SUB - PANELS FOR AIR HANDLING UNITS BMS Campatable Supply , installation , testing and commissioning of Cubical type sectionalised & Compartmentalised wall mounted switch board with 4 strip Alunimun Bus Bar suitable capacity, Cable allay etc of of as detailed below & conforming to the specification. Including connections & interconnection etc as required. AHU Sub Panel - Supply Air Blower ( Up to 10 KW) 01 No. - 40 A TP MCB with Conforming to BIS Direct on Line starter, overload relay, start/stop push buttons, ammeter (0-40A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears LOT

POWER & CONTROL CABLING Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required. Power Cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on cable trays). 3.5C x 240 Sq. mm

3C x 10Sq. mm

3C x 6 Sq. mm

Earthing Strip / Wires. Pdg.and fixing 25 x 5 mm G.I. strip along with Cable Tray as required.

Pdg. & fixing 6 SWG GI wire on surface or in recess , along with the exiting cable for loop earthing Including connection etc as required.

Supply & laying of rubber mat of size 900 mm & 12 mm thick

Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5% in convenient sections,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness

300 mm width x 50 mm depth x 1.6 mm thickness

600 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S cable trays bends with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness

300 mm width x 50 mm depth x 1.6 mm thickness

600 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S cable trays reducers with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness

300 mm width x 50 mm depth x 1.6 mm thickness

600 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S cable trays Tee's with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness

300 mm width x 50 mm depth x 1.6 mm thickness

600 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S cable trays cross members with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness

300 mm width x 50 mm depth x 1.6 mm thickness

600 mm width x 50 mm depth x 1.6 mm thickness

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium condotor cable of 1.1 KV grade as required. 3 x 10 Sq. mm

3 x 16 Sq. mm

3.5 x 240 Sq. mm

Supply installation, testing and commissioning of Tube Axial fan confirming to IS-3588 (revised) complete with tube casing in MS/GI standard construction epoxy painted, impeller with adjustable blade angles, bird screen ,gravity louvers, fire retardent double fold moisture and fire proof with flame retardent fabric confirming to IS-206 (revised) fire retardent flexible connection, necessary nut bolts and directly coupled TEFC Sq.cage induction motor (F-class insulation & B-class Temp. rise) suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. Audi Smoke Exhaust Ventilation fan Air Qty. = 30000 CFM Static Pressure = 25mm Wg Fan Speed = not exceeding 1450 rpm Motor = 7.5 KW Fan Dia = 1000 mm (Approx.) Noise level = not exceed 90 db at 1 meter distance Tube Axial Fans as described above.

Audi Fresh air Ventilation fan Air Qty. = 30000 CFM Static Pressure = 25mm Wg Fan Speed = not exceeding 1450 rpm Motor = 7.5 KW Fan Dia = 1000 mm (Approx.) Noise level = not exceed 90 db at 1 meter distance Tube Axial Fans as described above.

Electrical Sub Panel for Axial Fan Up To 7.5 KW Fan Motor 01 No. - 40 A TP MCB with Conforming to BIS Direct on Line starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer.

M/s Murari Lal Singhal

M/s Murari Lal Singhal