SPL REPAIR/ REPLACEMENT TO OVERHEAD LT CABLE TO UG CABLE AT IB LINE UNDER GE GOLCONDA

Dismantling old ACSR conductor of any size from over head lines complete all as specified and directed

Dismantling old Cross-arms of MS channel including clamps, nuts and bolts or angle sections etc. of any size from over head lines complete all as and directed

Dismantling old insulators of any type and size from over head lines complete all as specified and directed

Dismantling old service wire of any type and size from over head lines complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size185 sq. mm 3.5 core in trenches/ fixed to walls/ poles etc. including taking out of existing cable complete all as specified and directed.

All as per item No.5 but 120 Sqmm x 3.5 Core

All as per item No.5 but 95 Sqmm x 3.5 Core

All as per item No.5 but 25 Sqmm x 3.5 Core

All as per item No.5 but 10 Sqmm x 2 Core

Supply, install, testing and commissioning of new Out door LT feeder panel, factory fabricated, CPRI approved and tested , cubicle type, 3.15 mm thick CRCA sheet vermin proof with 3 phase and neutral Aluminium bus bar of current capacity 400 A of suitable size, phase and neutral colour coded with heat shrinkable PVC sleeves, with necessary supports, angle iron frame work and stand, front and rear opening double door locking arrangements and painting with one coat of red oxide primer and two coats of powder coated paint, suitable size of panel control copper wiring, accessories fitted on suitable insulator all housed in suitable bus bar chamber and fixing of digital Voltmeter, Ammeter with built in selector switch, CTs of suitable ratio, and pilot indication lamps (R,Y,B) along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable cable glands etc. , including PCC foundation and necessary earth work complete all as specified and directed and consisting and including of the following :- (a) 4 Pole MCCB 320 Amp 50 Hz 415 V with rupturing capacity 36 KA,Adjustable thermal & Magnetic setting(Incoming ) - 01 (b) 4 Pole MCCB 100A 50 Hz 415 V with rupturing capacity 25 KA,Adjustable thermal & Fixed Magnetic setting - 05 Nos ( 01 Stand by for Sub Panel) (c) Three phase Digital voltmeter 0-500 Volts with selector switch - 01 Set (d) Three phase digital Ammeter 0-500 Amps with selector switch and CTs - 01 Set (e) Phase Indicating lamp LED type for Red, Yellow and Blue - 01 Set