Maintenance work (Surface Dressing, Jungle Cleaning. Painting and Others Maisecllanious work) of 60. m wide road from L.G rotary to sai Mandir rotary and D.P.S rotary to Authortiy rotary for three year, Greater Noida.

Cleaning jungle including uprooting of rank vegetation grass bush wood trees and saplings of gith upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 m out side the periphery of area cleared.

Same as above 259(i) above but grass only.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. (all kind of soil.)

Tractor with water Tanker With Cast of water including P.O.L SOR-20/Sl.No-27/Chapter-2

For Sprinkling

Tractor trolley with driver and including pol SOR-2020/Sl.No-19/Chapter-2

Supply of Labour SOR-2020/Sl.No-12

Excavation in foundation in ordinary soll. (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). Sor-20/251(a)

Extra rates for quantity of earth excavated under water and liquidincluding pumping out of water as required. DSR-18/2.24.1

Extra For every additional lift 1.5m or part there of all kind of soile App.DSR-18/2.26.1

Cartage of ballast, Kankar Coal, grit or sand including loading & unloading but excluding stackings on pakka roads:

As in item (231) above but for cement, steel or other materials

Excavating holes more than 0.10 cum and upto 0.5 cum including getting out the excavated soil then returning the soil as required in layer and not exceeding 20cm in depth including consolidating each deposited layer by ramming watering etc. with disposing of surplus excavated soil as direction with in a lead of 50m and lift upto to 1.5m all kind of soil. DSR/2018/2.30.1

R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement: 1.5 coarsesand: 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately) DSR-18/16.15.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:

1:3:6 (1 cement: 3coarse sand: 6 graded stone aggregate 40 min nominal size) SOR-2020/280

Fencing with R.C.C. post placed at required distance, embedded incement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G 1. st aples on wooden plugs or GL. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C.posts, struts, earth work and concrete to be paid for separately) -Payment to be made per metre cost of total length of barbed wire used.

With G.1. barbed wire DAR-18/16.17.1

Painting with aluminium paint of approved brand and manufacture to give an even shade:

One or more coats on old work.DAR-18/13.100.01

Painting or varnishing with valsper or other approved high grade enamel or super synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.SOR-647

As in item (647) above but for every subsequent coat on previously treated surface.

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) DSR-2018/16.85

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in charge). DSR 13/16.69/P-

white washing with lime to give an even shade old work SOR-20/671/Chapter-9

M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materiais, labour and T&P etc. requried for proper completion of the work. SOR-305a

12 mm thick plaster with cement and coarse sand in 1:6 cement mortor over brick work minimum thickness not to be than Iem including supply of all materials, labour tool & plants etc. work DSR-18/13.4.2

Supply and fixing SFRC cover over chamber with out fram.

600x600 heavy duty

J.C.B with driver including pol SOR-20/Sl.No-31/Chapter-2

Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M25 using batching mix plant transit mixture and manual placing (MORTH-9.06E/Case-II)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to Plinth Level.

Thermo mechanically treated bars of grade Fe-500D or more. DSR-18/5.22.6

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater. driven by experienced operator on road surface including cost of material, labour T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable Specifications.

Steel work welded in built up sections/ framed work including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR-18/10.25.2

Labour Cess and GST will be paid extra as per govt. orders