General Fund 2024-25

Amount

Dismantling the existing damaged cement concrete portion clearing away and carefully taking material useful for reuse for any thickness of concrete including all cost etc. as per standard specification.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Floor finishing with cudapah stone slab 38 mm - 40 mm thickness over of 0.60 m x 0.60 m size cement mortar 20 mm thick 1:3 mix base above the bed of concrete and pointing with cement mortar 1:3 without polishing etc complete.

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97

Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Supply of interlocking paver block M40 grade bounding and laying of 80 mm thick high strength type confirming IS 15658-2006 of interlocking paver block in regained size of minimum compressing strength type confirming IS 15658-2006 of interlocking paver block in regaining size of minimum compressive strength of 40N/mm² in uniform shape of approved non sticking make to be end in flushing bone pattern with approved non sticking surface in the top and the rate including gravelling the based preparation of subbase with and cushion 100 mm thick laying out the pavement and the pieces in fit edge.

P. ARULAPPAN (BID ID -1180602)