Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | ₹12.3 L Quoted ₹14.0 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹16.3 LRejected-Finance 5B FF NAND VIHAR AZAD NAGAR NEAR GODARA PETROL PUMP HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | ₹16.3 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹18.6 LRejected-Finance SOUTH WEST DELHI 110046 INDIA UDYAM DL 10 0017623 | NEW DELHI | DELHI | 110046 | ₹18.6 L | L3 | Rejected-Finance Other than lowest |
| 4 | Rejected-Technical | - | - | Rejected-Technical Renewal of Enlistment not submitted |
| Sl No | Description | Qty | Unit | SUN MANN ENGINEERS L2 | H S SETHI and CO L1 | SHEETAL DOTLINE COMMUNICATION SYSTEMS PVT LTD L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, lap holders, regulators, bells as required, removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be made as per schedule of credit) and making good disturbed surface of walls, floors, etc as required as per existing complete all as specified and directed. | 1,692 | Per Point | 9 ₹15,228 | 35 ₹59,220 | 88 ₹1.5 L |
| 2.00 | Material and Labour for point wiring in existing concealed conduit for the following point (using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc. including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. if required and making good disturbed surfaces of walls/ceiling/floors etc. in cement mortar 1:3 as required complete all as specified and as directed for the following :-
Note : 1. Switch/socket/regulator/ceiling rose/lamp holder etc. shall be measured and paid for separately
a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way | 850 | Per Point | 400 ₹3.4 L | 255 ₹2.2 L | 285 ₹2.4 L |
| 3.00 | b). For one three pin socket outlet 5 Amps independent board | 150 | Per Point | 400 ₹60,000 | 100 ₹15,000 | 250 ₹37,500 |
| 4.00 | c) For one three pin 5 Amps socket outlet on the same board with other switches | 150 | Per Point | 350 ₹52,500 | 100 ₹15,000 | 165 ₹24,750 |
| 5.00 | d) For one light point controlled by two way switch | 6 | per point | 400 ₹2,400 | 100 ₹600 | 337 ₹2,022 |
| 6.00 | All a per item No 2 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete. | 180 | Per Point | 500 ₹90,000 | 420 ₹75,600 | 457 ₹82,260 |
| 7.00 | Material and Labour for surface point wiring for the following point ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls etc. if required and making good disturbed surfaces of walls/ceiling/floors etc. using CM (1:3) complete all as specified and as directed for the following :-.
Note : 1. Switch/socket/regulator/ceiling rose/lamp holder etc. shall be measured and paid for separately
a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way | 200 | Per Point | 420 ₹84,000 | 255 ₹51,000 | 315 ₹63,000 |
| 8.00 | b). For one three pin socket outlet 5 Amps independent board | 50 | Per Point | 420 ₹21,000 | 100 ₹5,000 | 255 ₹12,750 |
| 9.00 | c) For one three pin 5 Amps socket outlet on the same board with other switches | 50 | Per Point | 350 ₹17,500 | 100 ₹5,000 | 172 ₹8,600 |
| 10.00 | d) For one light point controlled by two way switch | 6 | Per Point | 420 ₹2,520 | 100 ₹600 | 337 ₹2,022 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Apr 2026, 6:00 pmClosed
GE Amritsar
Garrison Engineer
REPAIR/MAINTENANCE TO INTERNAL WIRING AND CONNECTED ACCESSORIES, DBs FITTING FIXTURES INCLUDING DAY TO DAY MAINTENANCE WORK OF OFFICER MD ACCN AT AMRITSAR CANTT
2026_MES_756797_1
GE/ASR-01/2026-27
Open Tender
Civil Works
180 days
GE Amritsar
Class E Category b i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹40,000
9 Jun 2026
18 Mar 2026
16 Apr 2026
18 Mar 2026
9 Apr 2026
2 Apr 2026
19 Mar 2026 - 26 Mar 2026
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, lap holders, regulators, bells as required, removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be made as per schedule of credit) and making good disturbed surface of walls, floors, etc as required as per existing complete all as specified and directed.
Material and Labour for point wiring in existing concealed conduit for the following point (using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc. including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls, ceilings etc. if required and making good disturbed surfaces of walls/ceiling/floors etc. in cement mortar 1:3 as required complete all as specified and as directed for the following :- Note : 1. Switch/socket/regulator/ceiling rose/lamp holder etc. shall be measured and paid for separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way
b). For one three pin socket outlet 5 Amps independent board
c) For one three pin 5 Amps socket outlet on the same board with other switches
d) For one light point controlled by two way switch
All a per item No 2 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.
Material and Labour for surface point wiring for the following point ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cuttings chases in walls etc. if required and making good disturbed surfaces of walls/ceiling/floors etc. using CM (1:3) complete all as specified and as directed for the following :-. Note : 1. Switch/socket/regulator/ceiling rose/lamp holder etc. shall be measured and paid for separately a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way
b). For one three pin socket outlet 5 Amps independent board
c) For one three pin 5 Amps socket outlet on the same board with other switches
d) For one light point controlled by two way switch
All a per item No 07 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete all as specified and directed.
Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed.
Supply and fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed.
Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.
Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed.
Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed.
Supply and fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed.
Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified and directed.
Supply and fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed.
Supply and fixing Ding Dong bell AC 230 Volts complete all as specified and directed .
Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and directed.
Supply and fixing in repairs for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed including following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.
Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.
Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.
Supply and fixing MCB single pole 6 to 32 Amps complete all as specified and directed.
Supply and fixing MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed
Supply and fixing 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.
Supply and fixing in repairs of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps complete all as specified and directed (for AC and geyser).
Supply and fixing in repairs LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.
Supply and fixing in repairs LED decorative Gate light/Garden light fitting not less than 9 Watts with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.
Supply and fixing Iin repairs LED security light fitting powder coated pressure die cast alminium compact High power LED street light with Modular lense with potted driver having effeciency and IP 65 protection lumens not less than 125 LM/W with 10 KV built- in- surge protection device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.
Supply and fixing in repairs 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable all as specified and directed and specified
Supply and fixing in repairs , Sub main wiring with two single core 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuity , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running metre.
Supply and fixing in repairs , Sub main wiring with two single core 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring and making good disturbed surface as per exisiting as required, complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit including accessories shall be measured as one unit/ one running metre.
Supply and fixing in repairs , Sub main wiring with two single core 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including making good disturbed surface as required as per existing, complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running metre.
Supply and fixing in repairs , Sub main wiring with two single core 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including necessary cuttings chases in walls, ceilings etc. if required and making good disturbed surfaces of walls / ceiling / floors etc. in cement mortar 1:3 as required as per existing , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running metre.
Material and Labour for in repairs Earthing complete with galvanized steel earth plate electrodes of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm, , complete all as specified and directed.
Supply and fixing in repairs , Sub main wiring with 4 run of 6 sqmm (nominal area) single core multi- stranded copper conductor on surface FRLS PVC insulated 1100 volt grade and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring including necessary cuttings chases in walls, ceilings etc. if required and making good disturbed surfaces of walls / ceiling / floors etc. in cement mortar 1:3 as required as per existing , complete all as specified and directed. Note:- 4 runs of 6 sqmm main cable one run of 6 sqmm for earth cable along with non metallic PVC conduit including conduit accessories shall be measured as one unit/ one running metre.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
BOQ_847735.xls
BOQ • 0.26 MB
TENDER01.pdf
Tender Documents • 1.11 MB
Download all tender documents and submit your bid