Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
14 Jul 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TELECOM
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- 1.Work of LED type Display Boards supplied & installed and operation through microprocessor/PC based system. OR 2. Work of Coach Guidance system in which LEDs used to display coach number/Coach Position or related information and operation through Microprocessor/PC based system. OR 3. Supply, installation, testing and commissioning of display of train information on LED based Display Boards i.e. Single or Multiline at a glance or PC based announcement system for train information to passengers. O R 4. AMC of Microprocessor/PC controlled LED based train display board/Coach Guidance System/Single or Multiline Display Boards/PC based Announcement system. NOTE A1: For the following equipment's a. SDH/STM/PDMUX/IPMPLS/VOIP b. Control equipment c. ISDN/IP based exchange d. CCTV/Video surveillance system e. Integrated security s y s t e m f. Networking equipment g. Train information display board/Coach guidance system/IPIS/GPS CLOCKS h. Secured communication system at level crossing gates i. VSAT j. MTRC 1. The equipment shall be procured from: a) If there is any RDSO approved source, then the equipment to be procured from the RDSO approved source or its authorized dealer/distributor. b) If there is no RDSO approved source but there is TEC approved source, then the equipment to be procured from the TEC approved source or its authorized dealer/ distributor. c) If there is no RDSO or TEC approved source then the equipment to be procured from the OEM or its authorized dealer/ distributor. 2. Make, Model Specification of the offered equipment along with OEM authorization if the tenderer is other than OEM shall be submitted along with the tender. 3. MOU with RDSO approved Source or TEC approved source or the OEM, covering Supply, installation, testing, commissioning of system including after sales support required during warranty period shall be submitted along with the tender.
25 conditions · 15 needing a document upload
PAN card Copy should be enclosed.
Please submit the copy of the registration certificate as applicable, GSTIN certificate should be enclosed.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should go through Annexure 1 & 2 of Tender Notice (attached in Tender Document)for list of documents required to be uploaded along with the offer.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment modes available ON IREPS portal LIKE net banking, debit card, credit card etc.Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed.
Copy of PAN number and GSTIN number should be submitted.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void.
(i)Tenderers will examine various provisions of the Central Goods and Service Tax Act, 2017(CGST)/Integrated Goods and Service Tax Act,2017(IGST)/Union Territory Goods and Service Tax Act,2017(UTGST)/respective states State Goods and Service Tax Act(SGST) also, as notified by Central/States Govt. and as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit(ITC) likely to be availed by them is duly considered while quoting rates. (ii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority. (iii) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism(RCM) and deposit the same to the concerned authority.
Augmentation & Provisioning of IPIS (Train Display Boards, Passenger amenities equipment) along with GPS clocks at Janghai Jn. Railway station of Lucknow Division.
106-Tele_Tender_12_26-27
106-Tele_Tender_12_26-27
Open
Works - General
270 Days
Lucknow, Uttar Pradesh
₹0
₹3.1 L
14 Jul 2026
23 Jun 2026
30 Jun 2026
127 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,55,00,745.62 | ||
| — | — | — | 4,83,919.98 | ||
| Supply of Central Data Controller Unitconforming to system requrement as perRDSO Spec.. RDSO/SPN/TC/108/2019 Rev.1.0 or latest. The control cosole shall havemain and standby CP to work in standbymode, one Nos. of 1 KVA UPS with twoindependent batteries, two LCD monitor (19inch), CCU Rack, KVM Switch, CDS (Layer-3Swtich of make CISCO, HP, Juniper, Brocade,Avaya, Extreme, Netgear, D-link or similar)and other accessories, housed in a standardsize cabinet along with driving Software forintegrated passenger information system asper RDSO Specification No.RDSO/SPN/TC/108/2019 REV.1.0 or latest.This includes supply and isntallation of SWfor Announcement system with necessaryinterface and announcement recording(Hindi/English/ fresh studio copy of voicefiles.) as per RDSO Specification No.RDSO/SPN/TC/108/2019 REV.1.0 or latest (the same to be interfaced with existing audioand video system insatalled at the station.).The software should support all types ofdisplay/announcement by merely addingnecessary hardware in future (single/multiline arrival/departure traininformation display boards. (singlesided/double sided), CGDB, AGDB,LCD/LED/Plasma TVs etc. INSPECTION:RDSO FOR SUPPLY PORTION | — | 1.00 | — | — | |
| — | — | — | 13,929.45 | ||
| Installation, testing and commissioning of CDC as per RDSO Specification No. RDSO/SPN/TC/108/2019 Rev.1.0 or latest or latest as supplied above. | — | 1.00 | — | — | |
| — | — | — | 3,45,749.8 | ||
| Supply of Platform Data Controller (PDC) conforming to System requirement of RDSO Spec.. RDSO/SPN/TC/108/2019 Rev1.0. or latest. It consists of 8 Ethernet port and 8 serial port for field device and 2 SFP optical port to connectivity with CDC. Optical ports are used whether the distance between PDC & CDC is more than 80 meter as per Set as per RDSO Spec.. RDSO/SPN/TC/61/2015 Rev 4.0.Amd.1 or latest. INSPECTION:RDSO FOR SUPPLY PORTION | — | 5.00 | — | — | |
| — | — | — | 17,538.05 | ||
| Installation, testing and commissioning of PDC as per RDSO Specification No. RDSO/SPN/TC/108/2019 Rev.1.0 or latest or latest as supplied above. | — | 5.00 | — | — | |
| — | — | — | 5,217.47 | ||
| Complete wiring, testing, integration and commissioning of IPIS system as per scope of work. This shall includes all connecting cables, connectors etc | — | 1.00 | — | — | |
| — | — | — | 4,66,100 | ||
| Supply & Installation of 4 Channel Voice Data recording & Processing unit Excise Duty -- (VDRPU) along with Computer, UPS, 19"" Rack as per Amendment No. 1 or latest Specn. No. RDSO/SPN/TC@ 45&47@ 2002 Rev. 1.1. INSPECTION:RITES FOR SUPPLY PORTION | — | 1.00 | — | — | |
| — | — | — | 52,66,500.2 | ||
| Supply, Installation,Testing andCommissioning of Double Faced Coach Guidance Display Boards as per RDSOSpecification No. RDSO/SPN/TC/108/2019 or latest as per specification. It includes supply of GI pipes required for installation of CGDB system. INSPECTION:RDSO FORSUPPLY PORTION | — | 130.00 | — | — | |
| — | — | — | 15,94,688.94 | ||
| Supply, Installation , testing &commissioning of double face Four Line Coach Position Train formation At a Glance Display Board(AGDB) as per RDSO spec no:-RDSO/SPN/TC/108/ 2019(Rev0.0) or latest INSPECTION: RDSO FOR SUPPLY PORTION | — | 6.00 | — | — | |
| — | — | — | 19,38,294.21 | ||
| Supply of True color Indoor Video Display (IVD) size Pixel Resolution (WxH) 432x128 (6 Line Single face) as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 1.0 or latest. INSPECTION: RDSO | — | 1.00 | — | — | |
| — | — | — | 84,116.95 | ||
| Installation, Testing and commissioning of True Colour Video Display (IVD) Size Pixel Resolution (WxH) 432x128 as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 1.0 or latest | — | 1.00 | — | — | |
| — | — | — | 5,38,040 | ||
| Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it afterwards as per original condition. In hard rocky ground area , cables will be laid normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench . The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no. SDO/Cable laying/008, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. | — | 4000.00 | — | — | |
| — | — | — | 1,10,585.8 | ||
| Supply and installation of 10/100 Mbps LAN Extender as per RDSO Spec. No. SPN/TC/82/2013 Rev.1.0 or latest operating on built in AC 230 V power supply (similar to D-Link make). The items should be supplied with Configuration of Modems for use in railway application. INSPECTION: RITES FOR SUPPLY PORTION | — | 10.00 | — | — | |
| — | — | — | 68,889.84 | ||
| Supply, installation, testing and commissioning of Media Converter fiber to Ethernet 100 base T Signal mode fiber with all required accessories including AC 230 V to DC Power adapter, as per Clause No. 16 of RDSO Spec. RDSO/SPN/TC/65/2016 (Rev.4.0) or later INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 12.00 | — | — | |
| — | — | — | 1,31,300.75 | ||
| Supply, installation, testing, wiring & commissioning of Layer-2 managed Switch (24 ports 10/100/1000 BASE-Tports, 4x 1G SFP+ ports) as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 orlatest make HP/Cisco/Juniper or other reputed make with similar or better specs. Switches to be procured from TTP approved sources) INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 5.00 | — | — | |
| — | — | — | 2,23,938 | ||
| Supply of STP CAT-6 Cable latestEIA/TIA568-B2-1. INSPECTION: CONSIGNEE | — | 6600.00 | — | — | |
| — | — | — | compliant | ||
| — | — | — | 64,440 | ||
| Supply OFC single mode 6 fiber armouredcable Specification No. IRS:TC55-2006 Rev.1 or latest of make finolex/Polycab/Paramount. INSPECTION: CONSIGNEE | — | 2000.00 | — | — | |
| — | — | — | 5,65,920 | ||
| Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or superior. INSPECTION: RITES | — | 6000.00 | — | — | |
| Laying of OFC/Power cable/CAT-6 cable PA Cable/Data cable and all the other types of telecom cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing variouys cpmponents and system integration. All materials for jointing and termnaition of power cable/CAT-6 cable as per site requirement are to be supplied by contractor(such as PVC/Casing Caping). This item also includes supply of RJ-45 connector with cap for terminating CAT-6 cable as per site requirement. | — | — | — | 3,51,130 | |
| — | — | — | 9,904 | ||
| Blowing/drawing of OFC cables in the HDPE duct along with all the protective work as per instructions of engineer incharge at site. Inspection: Consignee | — | 800.00 | — | — | |
| — | — | — | 2,72,736 | ||
| Supply of 40 mm outer dia. PLB HDPE duct as per RDSO Spec. No. RDSO/SPN/TC/45/2013, Rev 2.0 or latest with all accessories (like couplers, bends etc). INSPECTION: CONSIGNEE | — | 4800.00 | — | — | |
| — | — | — | 46,032 | ||
| Laying of PLB HDPE pipe in trench/open space, fixing and clamping of HDPE pipe on wall or structure and sealing of the duct after laying with proper fixing material. All the accessories like couplers, end caps/plugs to be provided by the contractor within the same cost and its protective work as per direction of site engineer. | — | 4800.00 | — | — | |
| — | — | — | 18,500.4 | ||
| Supply of 12 port loaded LIU rack mountable, LIU shouldbe provided for terminating the optical fiber cables. It shall provide minimum bending radius and splice trays shall function as a splice cover for Pigtail Splicing. Cable glands shall be provided for secure anchoring of incoming cables. Rubber grommets shall be provided at the cable entry point for tight sealing. The splice tray should be made of ABS materials. LIU should be of reputed make. Make: D-Link/3M/ Digilink/Molex/ DAX or similar. INSPECTION: CONSIGNEE | — | 5.00 | — | — | |
| — | — | — | 3,417.05 | ||
| Installation, Testing & Commissioning of rack mountable 12 port Loaded LIU. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. | — | 5.00 | — | — | |
| — | — | — | 60,471.55 | ||
| Supply and installation of 9U, 19 inch rack for pole mount/ wall mount with Fan 230VAC 90CFM-02 Nos., AC distribution box (5 socket of 5A, Power On LED indicator, MCB)- 01 No., Shelf Cantilever 1U: 01 No. Cable Manager 1U:01 No. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 5.00 | — | — | |
| — | — | — | 7,715.04 | ||
| Supply of 19"" 6U Rack with all accessories like Electrical fitting, Fan tray, Patch Panel, cable manager, spike buster for housing IP storage unit as per specification INSPECTION: CONSIGNEE | — | 2.00 | — | — | |
| — | — | — | 120.98 | ||
| Installation, Testing & Commissioning of 19" 6U Rack .All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. | — | 2.00 | — | — | |
| — | — | — | 3,06,597.14 | ||
| Supply, Installation, Testing &Commissioning of 5 KVA On Line UPS with isolation transformer as per RDSO spec no. RDSO/PE/SPEC/0023-2001(rev 0.0) amnd 2.0 or latest suitable for single phase AC input & single phase AC output, floor mounted type, of make APC/Luminious/microte/liebert/Numeric idicative backup time 120 minutes. This also includes supply of one battery rack and one set (for input and output) compatible MCBs complete with cover & fixing materials. Make: Havells, Anchor or similar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 2.00 | — | — | |
| — | — | — | 1,07,639.85 | ||
| Supply of Online UPS system, Single Phase of rating 1 KVA UPS along with Battery suitable for 1 hr. back-up. Make: MICROTEK, LUMINOUS. EXIDE. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 5.00 | — | — | |
| — | — | — | 9,484.24 | ||
| Supply, installation, testing &commissioning of 1 KVA UPS off lineinbuilt Battery (9Ah/12volt) Capacity :-1.0/216 (KVA/VAH) rated out Put :-Single phase Sine wave 230voltAc/50Hz Volt , Switching over Time :-9Mill.Sec. Type Of Battery- SMF VRLA,make- APC/Microtek/Luminious or anyother reputed make with 2 yearswarranty. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 2.00 | — | — | |
| — | — | — | 1,10,757.8 | ||
| Supply & Installtion of 55"" LED UHD smart TV of reputed make like LG model 55 UP 7740 PTZ/Samsung/Sony or any other reputed make with similar or better specs. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 2.00 | — | — | |
| — | — | — | 1,30,064.55 | ||
| Supply & installation of PA amplifier (Dual Zone model TZA - 4000EM Ahuja make or similar) . This includes all required fittings and wiring material supplied by contractor at his own cost as per instruction of site engineer. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 5.00 | — | — | |
| — | — | — | 61,044.3 | ||
| Supply of 15 watts Column speaker, matching transformer and driver unit, make reputed as SCM- 15T of Ahuja make or similar. as per RDSO specification no. RDSO/SPN/TC/63/2006 Make Ahuja, Philips, Sony, AKG or similar. INSPECTION: CONSIGNEE | — | 30.00 | — | — | |
| — | — | — | 4,306.26 | ||
| Supply of Mike AHUJA ACM-66CH or superior make. With stand as per RDSO specification no. RDSO/SPN/TC/63/2006 make Ahuja, Philips, Sony, AKG or similar. INSPECTION:CONSIGNEE | — | 3.00 | — | — | |
| — | — | — | 96,850 | ||
| Supply of 25 watts Industrial Hornspeaker with 5,10,15,20 watt tappings,matching transformer and driver unit,make reputed as LBD 8347, 8308 ofPhilips make, UHC30XT of Ahuja makeor similar. InspectionByConsigneeSupply of 25 wattsIndustrial Horn speaker with5,10,15,20 watt tappings, matchingtransformer and driver unit, makereputed as LBD 8347, 8308 of Philipsmake, UHC30XT of Ahuja make orsimilar. INSPECTION: CONSIGNEE | — | 50.00 | — | — | |
| — | — | — | 39,902.25 | ||
| Supply of Gooseneck PAMicrophones model StudioMaster Flex 4 set21''Gooseneck mic with standor similar INSPECTION: CONSIGNEE | — | 5.00 | — | — | |
| — | — | — | 3,36,600 | ||
| Supply, Laying, testing and Commissioning of twin core screened cable 0.9 sq. mm annealed tinned copper conductor confirming to IS-694/90.(material required for wiring is supplied by the contractor) INSPECTION: CONSIGNEE | — | 6000.00 | — | — | |
| — | — | — | 5,20,216.4 | ||
| Supply, Installation, Testing & Commissioning of Platform Dual face, 4 digit, GPS synchronised digital double faced Digital platform clock as per RDSO Specification no. RDSO/SPN/TC/65/2008 Rev.3.0. Amdt1 & Amd 2 or latetst, with LED of Blue/Red/White color and size approximately 762 x 381 x 228 mm. It also includes all fitting arrangements. (color to be decided by Railways). INSPECTION: RDSO FOR SUPPLY PORTION | — | 10.00 | — | — | |
| — | — | — | 32,323.3 | ||
| — | 2.00 | — | — | ||
| — | Supply, for 30 | Installation, testing Office area as perRDSO/SPN/TC622008 months from the date of | Digital Clock latest,Amendment FOR | ||
| — | — | — | 74,627.72 | ||
| Supply of 14" LCD/LED basedUTS-PRS (Universal) farerepeater with facility of QRcode display as perspecification Inspection byConsignee. | — | 4.00 | — | — | |
| — | — | — | 44,251.12 | ||
| Supply & Installation of face to faceenquiry consisting of an attendant unit, acustomer unit and a power supply unit,which are easy to install and throughdedicated cables as supplied with thesystem. INSPECTION: CONSIGNEE FORSUPPLY PORTION | — | 4.00 | — | — | |
| — | — | — | 19,231.22 | ||
| Supply & Installation of 19"" Rack 17U withpower strip and all fitting accesssories forhousing of network equipment. Both side door INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 1.00 | — | — | |
| — | — | — | 33,159.8 | ||
| Supply of layer-2 switch ( minimum 8 +2 manageable ) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 baseX SM SFT port with optical modules complete with all accessories etc. as per RDSO specification no. RDSO/SPN/TC/65/2021 version-6 or latest Switches to be procured from TTP approved sources) INSPECTION: CONSIGNEE | — | 2.00 | — | — | |
| — | — | — | 5,487.8 | ||
| Installation, Testing & Commissioning of Layer-2 PoE Switch (minimum 8+2 port manageable) with 8 nos. 10/100 /1000 Mbps Ethernet port and 2 nos. 1000 Base X SM SFP port with optical modules complete. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. | — | 2.00 | — | — | |
| — | — | — | 23,503.64 | ||
| Supply and installation of Modem pairsV35&G-703,2 wire leased line2mbps(Nx64 KBPS). Make- Team engineer, Atrie or similar INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 2.00 | — | — | |
| — | — | — | 27,569.46 | ||
| Supply, installation & commissioning of maintenance free earth suitable kit as per RDSO specification RDSO/SPN/197/2008 and Drg No. SDO/RDSO/E&B/002 dated 19.09.2008 or latest with latest amendments. Earthing kit consisting of 1. Earthing electrode of 17 mm dia 3m long - 01 No. 2. MEEB (300mm X 25mm X 6mm) - 01 No. 3. SEEB (200mm X 25mm X 6mm) - 01no. 4. Earth Enhancing compound-30-35 Kg (minimum). 5. Multistand Single core PVC insulated copper cable 35 sq mm as per IS:694 (Duplicated) used to connect MEEB to main earth electrode Min. 10 mtrs or as per site requirement. This includes:- provision of earth connection from MEEB to S&T equipment i.e. cable sheath, apparatus case, BPAC, Axle counter, IPS, Data logger etc. with PVC earth wire of Size 16/25 Sq mm. through copper lugs of suitable size. PVC earth wire shall be supplied by Contractor. Note: At certain locations, it may not be possible to achieve earth resistance of less than 1.0 ohm with one earth electrode/ pit due to soil resistivity. In such cases, provision of loop earth consisting of more than one earth pit shall be done for interconnection of two earth pits copper tape of size 25 X 2 Sq. mm shall be provided by the contractor. The number of pits required shall be decided based on the resistance achieved for the earth pits already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as separate earth. Supply by RDSO approved Firm. INSPECTION: RDSO FOR SUPPLY PORTION | — | 1.00 | — | — | |
| — | — | — | 19,879.87 | ||
| Supply, installation, testing &commissioning of All in One(Monochrome MultifunctionPrint/Copy/Scan) Laser printer of anyreputed make having feature ofminimum HPM1005/MFP126nw/MFP136nw or betterfor A4 Printing with Ethernet, USB andWi-Fi, features. Along with 3 yearswarranty to printout the report of failurefor analysis & reporting purpose. INSPECTION: CONSIGNEE FOR SUPPLY PORTION | — | 1.00 | — | — | |
| — | — | — | 90,672.56 | ||
| Supply of workstation suitable for fault analysis or other application. Note:- Workstation configuration are as follows: Intel Core i5 10500 or higher, 16 GB RAM, HDD 1000 GB, SSD 512 GB Windows 10/11, 2K display 21.5 Inch. It also includes supply of Laser Printer (Make HP/Brother or better). INSPECTION: CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 9,066.72 | ||
| Supply of HDMI Splitter 1 inputs 8 output ports of reputed brand. Make : DTECH/Honeywell or Better. INSPECTION: CONSIGNEE | — | 4.00 | — | — | |
| — | — | — | 6,847.6 | ||
| Supply of HDMI cable of 15 mt of reputed brand. INSPECTION: CONSIGNEE | — | 4.00 | — | — | |
| — | — | — | 49,544.4 | ||
| Supply of Chair(Revolving High Back Mesh office chair).Make:Godrej, Green Soul Jupiter or better. Material (Set Of Two) INSPECTION: CONSIGNEE | — | 4.00 | — | — | |
| — | — | — | 17,433 | ||
| Supply ofOffice/visitor/study/executive/computersupport Godrejor reputed firm for seatingarrangement. INSPECTION: CONSIGNEE | — | 4.00 | — | — | |
| — | — | — | (Cushioned) | ||
| — | — | — | 49,441.24 | ||
| Supply of Table. Make:Godrej,Model:WT 718 + ERU orSimilar. INSPECTION: CONSIGNEE | — | 4.00 | — | — | |
| — | — | — | 49,728.84 | ||
| Supply of Steel Almirah (Model: Godrej Store Well/Slimline 4S) INSPECTION: CONSIGNEE | — | 2.00 | — | — | |
| — | — | — | 1,43,044.33 | ||
| Supply of Optical Time Domain Reflectometer for 1310/1550nm fiber with resolution of 60 Cms, dynamic Range of 314/29 dB with all accessories confirming to TEC Specification No. TEC Specification No G/OTD/02-03 March 2009.Make EXFO Model MAX 720C , AQ-7270+735022.Make Yokogawa Electric Co Ltd Japan or Similar. INSPECTION: RITES | — | 1.00 | — | — | |
| — | — | — | 2,60,102.74 | ||
| Single fiber fusion splicer similar tofujikura 80C with standard accessories :ACADAPTER /BATTERY Charger ADC-181PC, AC Power Cord ACC-XX: 1PC spareelectrode Elect2-20:1 pair carrying caseCC-30:1PC USB cable USB-01: 1PCSleeve loader SL01:1 PC dispenser AP-01: 1 PC screwdriver SC-01 1PC,Instruction Manual: 1 PC Quickreference Guide 1PC warning& cautions:1 PC ; BATTERY RACK BRT-09, Batterycharger cord DCC-18: 1 PC HighprecisionFiber cleaver CT-06: 1 PC, 3 in-1 Stripper : 1PC & Protection sleeves:25nos. ( A demo shall bearranged alongwith supply) as per TEC Specificationg/osm/01-03 April2005 Model S-177A.MakeFURUKAWA ELECTRIC COJapan. Type approved or Similar. INSPECTION: RITES | — | 1.00 | — | — | |
| — | — | — | 20,960.67 | ||
| Tool Kit consisting of Optical power meter (Fiber shot 9990V),Multimeter (Fluke101), Ethernet Crimping Tool (Standard Make) Console cable (Cisco= RJ 45-DB9), Wrist ripper (Standard Make), Universal Spanner Set (Taparia),Screw Driver Set (Taparia-7Pieces set),Cutting plier(Taparia), Wire Stripper,Industrial grade USB to Serial cable, Round Cutter, Cleaver, with all accessories or Similar. INSPECTION: CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 32,768.25 | ||
| Tools Kit for maintenance with small sizecanvas bag with following items :- 1)Combination Plier 8"", 2) Long Nose Plier(Round Nose ) 6"" , 3) Wire Striper Plier6"" , 4) Screw Driver set ( 5 Piece) , 5) Hexa with frame 12"" 6)Adjustable Spanner set 8"" 7) Ball pinHammer (200 gm) , 8) Side Cutting Plier6"" 10) Soldring iron (Soldron make orsimilar) 11) Torch with cell (3 cell) (Eveready/ Geep or similar ), 12) KroneTool (Krone make or similar) 13) Crimping Tool, 14) LAN Tester, 15) Wrapping and DeWrapping tool, 16) Visual Fault Locator, All ToolItem 1 to 9 of Taparia/Gedor/ Jhalanimake or similar. INSPECTION: CONSIGNEE | — | 5.00 | — | — | |
| — | — | — | 9,556.12 | ||
| Supply of Portable digital auto range multi-meter clamp type Philips, Motwani, Fluke or Rishabh make capable to measure from (0.1mv/0.01ma) AC/DC upto 50Amp(AC/DC), 600V(AC/DC) and 0.1 ohms- 40M ohms suitable for measurement of Freq., capacitance complete with Manual, leads, battery and holster etc. INSPECTION: CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 5,698.77 | ||
| Digital earth tester 4-Terminal , range 0-10/100 Ohm with Ni-cd rechargable battery with accessories kit and other required accessorices TEC spec no GR/TIE-10/01- April 2005 orlatest. INSPECTION:CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 35,990.76 | ||
| Digital True RMS Multimeter moder Fluke 177 or similar spec., True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and frequency, capacitance, resistance, continuity, and diode measurements and having 0.09% basic accuracy, a digital display with analog bar graph and backlight. INSPECTION: CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 7,419.57 | ||
| Supply of Digital insulation Tester (Megger) 100 V ,Motwani , Philips or equalto make. INSPECTION:CONSIGNEE | — | 1.00 | — | — | |
| — | — | — | 19,776.87 | ||
| Supply of Transmission measuring set along with all accessories as per RDSO Spec. No. IRS TC 43/87 or Latest, Make Aplab 2031/2031A/Anu Vidyut or better INSPECTION:CONSIGNEE | — | 1.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACSGCC22-231to6.pdf
ATTACHMENT
GCC Correction slip 7 to 10
ATTACHMENT
GCC_April-2022_1.pdf
ATTACHMENT
GCCACS11..pdf
ATTACHMENT
T-12JNHIPIS_1.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipno7-10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .