Tender ID

Karnataka

Retender

Works

Buildings

Construction of new toilet at Second floor in Jaladarshini Guest House at Mysore

Public Works Department

PWD Speical Division Office Mysuru | Karnataka

Amount: Refer DocsCloses: 11 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published4 Nov 2024
Closed11 Nov 2024
Retendered4 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 4 Nov 2024

Tender Value

Refer Docs

EMD Value

₹10,500

Closing Date

11 Nov 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Raksha R

Office Number

Work Description

Construction of new toilet at Second floor in Jaladarshini Guest House at Mysore

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT14656/CALL-3

Reference Number

PWD/2024-25/BD/WORK_INDENT14656/CALL-3

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Speical Division Office Mysuru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Registration Certificate

RequiredAnnual Turnover Certificate BY CA

RequiredEXISTING COMMITMENTS

RequiredResidential certificate for the domicile in Karnataka for 10 years or more

RequiredReserved Category Certificate ST

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP-Procurement on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Procurement portal due to internet connectivity issues and technical glitches at bidders end.

EMD Payments through K Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value Min Rs.500 and Max Rs.7500 soon after contract has been issued to bidder.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Materials like ASPHALT, AGGREGATES, steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.3 of STD tender document Attached.

All the items in the tender include all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer- in-charge of this work.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-1

Contractors should be registered as KPWD Class IV and above Civil Contractor.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department Special Division Mysore during office hours on all working days.

The successful Tenderer shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, PWD, Special Division, Mysore given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered.

To qualify for award of this contract each tendered in its name should have in the last five years 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 achieved in at least two financial years an average financial turnover in all classes of civil engineering construction works only of Rs 8.39 Lakhs.

ALL THE RATES ARE INCLUSIVE OF GST AND GST WILL NOT PAID SEPARATELY

the contractor of SC/ST category should be upload cast certificate & residential certificate (10 years) for this reserved work

The contractor should pay the wage for labour as per schedule of rates. The contractor quoting less rates below schedule of rates for labour will be rejected.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹10,500

Important Dates

Last Activity

4 Nov 2024

Published

4 Nov 2024

Download Ends

8 Nov 2024

BOQ Preview

•

Construction of new toilet at Second floor in Jaladarshini Guest House at Mysore

•

Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge ( Vol-2, Page No.193, Item.No.19.61) ---- ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Steel Fabrication for Buildinga. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hoo...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

•

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S.flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plasterwith cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6mm thickcement plaster with cement mortar 1:6(1 cem...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust,mortar drops and...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conferming to IS 13592 Type A , including jointing with seal ring conferming to IS 5382, leaving 10 mm gap for thermal expa...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Integral Crystalline Water Proofing AdmixtureProviding and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries ...

•

Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

•

PProviding and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : : of 125x64x1.90mm ( Vol-2, Page No.107, Item. No.12.74.1) ---- Including cost of al...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

•

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

•

required colour or shade, with necessary screws e...

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ( Vol-2, Page No..105, Item. No.12.62) ---- Including cost of all materials, with all lead lift an...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge, 22.15.3 SS Aldrop 16mm dia, 200mm ( Vol-2, Page No.218, Item. No.22.15.3 ) ---- ...

•

Providing and fixing 20mm nominal OD chlorinated Poly Venyl chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass th...

•

Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 g (Vol-2, Page 119 Item. No.13.14) ---- Including cost of all material...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (Vol-2, Page 119 Item. No.1317) ---- Including cost of all materials, with all l...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bor. (Vol-2, Page No.117, Item. No.13.4.1) ---- Including cost of all materials, with a...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.( Vol-2, Page No.133, Item.No.14.8) ---- Including cost of a...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe, 32 mm dia (Vol-2, Page No.136, Item.No.14.28.1.1) ---- Including cost of all ...

•

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cist...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy ( Vol-2, Page No.144 Item.No.14.89 ....

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing toilet paper holder :C.P. bras. ( Vol-2, Page No.136, Item.No.14.34.1) ---- Including cost of all materials, with all lead lift and labour charges, complete as directed by the En...

•

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore. (Vol-2, Page No.118, Item.No.13.8.2.1) ---- Including cost of all materials, with all lead l...

•

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ( Vol-2...

•

Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid(Vol-2, Page 120, Item. No.13.22.2) ---- Including cost of all materials, with all lead li...

•

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (Vol-2, Page 135 Item. No.14.22.B) ---- Including cost of all m...

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Econ...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (Vol-2, Page No.127, Item.No13.57) ---- Including cost of all materials,...

•

Earth work excavation by manual means for rains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tech...

•

Procurement of Ingredients: Procurement of farmyard manure/compost, sand andred-earth (ingredients) required for raising seedlings inclusive of transportation,breaking of clods, sieving and heaping ea...

•

Procurement of Ingredients: Procurement of farmyard manure/compost, sand and Red-earth (ingredients) required for raising seedlings inclusive of transportation,reaking of clods, sieving and heaping e...

•

1ST DIGGING:-Digging of the area for developing lawn including removing weeds,

•

debris if any and breaking of clumps, watering etc. (1x1x0.45mt) ( Vol-8, Page No.49, Item No.12.10 (B) ) ---- Including...

•

2ND DIGGING:- Digging of soil by removing grass etc if any and levelling of the soil

•

etc .. (1x1x0.45mt) ( Vol-8, Page No.49, Item No.12.10 (C) ) ---- Including cost of all materials, with all lea...

•

Procurement of quality lawn grass Bufullo Grass Dibbling ( Vol-8, Page No.49, Item No.12.10 (G) (h)) ---- Including cost of all materials, with all lead lift and labour charges, complete as direc...

•

Labour Chargesmixing Inputs as per prescribed proportion and quantity and spreading, applyingfertilizers,digging, levelling , and dibbling with lawn grass at a spacing of 5cm x5cm& as per the directio...

•

WORK TO BE UNDER TAKEN DURING MAINTENANCE:-

•

Watering : The plants and lawns in the garden should be watered frequently asrequired looking to the climate, soil and plant conditions: If sprinklers are ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-14656 Call 3 ST reserve (1).doc

Tender Document • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of new toilet at Second floor in Jaladarshini Guest House at Mysore

Public Works Department

PWD Speical Division Office Mysuru | Karnataka

Amount: Refer DocsCloses: 11 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published4 Nov 2024
Closed11 Nov 2024
Retendered4 Nov 2024