Renewal of BT Surface at VOC Nagar Ommitted Roads in ward no 25, North Zone

Earthwork Excavating and depositing on bank with initial lead of 10m & initial lift of 2m in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth

Removal of Excavated Excess Earth away from the site to 2 K.M including loading and transportation charges etc, complete as per directed by the departmental officers

Providing and Laying, Spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH Specification

Providing and laying of Prime coat using Emulision Bitumen at the rate 7kg Per 10sq.m the WMM Surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev-5 specifications

Providing and laying of Prime coat using Emulision Bitumen at the rate 2.5 kg Per 10sq.m the WMM Surfacetreated with primer using 2.5 kgs of bituminous Emulsion (RS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 503 of MORTH Rev-5 specifications

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying 25 mm compacted thick Semidense carpet using 0.10m3 of 11.2 mm INR CBG metal 0.16 m3 of 6.7mm IRC 0.11m3 of 2.8mm & below with 24 KGs of bitumen for prefixing per10m2 including cost and conveyance of all materials to cmp site , heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity , conveying the mix by tipper trucks to power site , spreading the mix is required temperature for uniform thickness of 25mm with mechanical power to the specified grades and cross section and compaction by 80- 100 kn power roller to the required density etc including labour, for attending loading bitumen to bitumen tank and metal to feeder unit , labour for attending to power site etc including hire charges and fuel charges for 20- 30T cmp with bitumen boiler tipper trucks power finishers , power roller and another tools and plant required including all other incidental charges etc complete as per specification using cmp clause 511 most.