GE/H-83/2024-25 ADDN/ALTN TO GROUND FLOOR OF BLDG NO P-105 AT ADC (R AND R) UNDER GE E/M RR HOSPITAL DELHI CANTT-10

Amount

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface fair and even complete all as specified & directed by Engr-in-Charge.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface fair and even complete all as specified & directed by Engr-in-Charge.

M&L for applying 1.5mm thick cement base wall care putty on plastered surface of wall and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified & directed by Engr-in-Charge.

M&L for applying 1.5mm thick cement base wall care putty on plastered surface of ceiling and making the surface even & smooth for receiving distemper / paint of any description, complete all as specified & directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of plastic emulsion paint over one coat of primer, complete all as specified & directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over one coat of primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying two coats of plastic emulsion paint over one coat of primer, complete all as specified & directed by Engr-in-Charge. Note: Wall care putty where ever directed will be applied and will be measured & paid separately.

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing tiles to the premises complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded coloured PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm corogated colour PVC sheet in front side& plain in back side reinforced with MS square tube S&F in opening as per specification and drgs complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge at site.

S&F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specied and directed by Engr-in-Charge.

Supplying, fabricating & fixing in repairs of aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), vertical stile of door shutter of size 85mm x 44.45mm x 1.5mm thick, top, middle and bottom rail of size 85mm x 44.45mm x 1.5mm thick including aluminium powder coated chowkhat of 100x44x1.5mm section with rebate complete frame and fixing plain/ tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/ beading as directed. One mortice lock for aluminium door (each) and three nos aluminium hinges of size 100mm and two nos aluminium tower bolts of 150mm size for each door fixed with rawl plug includimg rectification of floor/ wall to match the existing surface, complete all as specified and directed by Engr-in-Charge. Note: (Cost of sheet glass/ ACP sheet shall be measured and paid seperately).

Supply Only for 5.5mm thick glass (plain or tinted) fixed with beading in aluminium frame complete all as specied and directed by Engr-in-Charge.

Supply only 3mm thick aluminium composite panel (ACP) sheet complete all as specied and directed by Engr-in-Charge.

S&F 150mm size aluminium alloy handles, cast type, anodised, complete all as specied and directed by Engr-in-Charge.

Supplying, fabricating & fixing in repairs of aluminium powder coated glazed three track sliding window of frame 100mm x 44mm x 1.5mm and sliding shutter of section 40mm x 19mm including 4mm thick sheet glass, ordinary quality exceeding 0.50 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.30mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangement with each moving leaf, complete all as specied and directed by Engr-in-Charge.

S&F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specied and directed by Engr-in-Charge.

S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.) complete all as specied and directed by Engr-in-Charge.

Supplying, fabricating & fixing in repairs of aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame recangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangements for bottom and top member of alumium frame in floor/ PCC/ Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre including takng down old partition, complete all as specified and directed by Engr-in-Charge. (Note: Cost of ACP sheet or prelaminated board and frosted glass shall deemed to be included in the rate qouted for this item)..

S&F in repairs venation blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fied as per manufacturer instructions complete all as specied and directed by Engr-in-Charge.

Dismantling boarding any description, fixed in any position with screws, complete all as specied and directed by Engr-in-Charge.

S&F 18/19mm thick PVC moulded solid board, one side pre-laminated for cabinets boxes shutters etc with shelf and shutters full size fitted under/ above kitchen cooking platform and other platform complete all as specied and directed by Engr-in-Charge.

S&F soft closing clip on hinges, full/ half overlay type, of stainless steel of size as per site requirement complete all as specied and directed by Engr-in-Charge.

S&F 100mm size stainless steel handles with matt finish fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F multipurpose lock 50mm size with triple keys, suitable for cupboard door/ drawer complete all as specified and directed by Engr-in-Charge.

S&F stainless steel telescopic type ball bearing slide and runner, suitable for drawers of size as per site requirement complete all as specified and directed by Engr-in-Charge.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed by Engr-in-Charge.

S&F door closer aluminium (die casted) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed by Engr-in-Charge.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring, and removal of debries from site complete all as specified and directed by Engr-in-Charge.

S&F in replacement toughned glass (plain/ frosted) frameless door with fixed portion of 12mm thick thickness including cutting holes, edges rounded all kind of stainless steel patch fitting & fixtures, spider patch etc, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel handle 450mm long fixed to 12mm thick toughned glass door with and including all fixing accessories i.e. bolt, washer, adhesive etc complete all as specified and directed by Engr-in-Charge.

S&F stainless steel door lock, glass to glass type, suitable for 12mm frameless toughned glass door with and including all fixing accessories i.e. bolt, washer, screws, adhesive etc, complete all as specified and directed by Engr-in-Charge.

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed by Engr-in-Charge.

M&L for exposed GI frame/ grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium/ metal/ mineral fiber ceiling ties having main T runner of 24mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangement to form grid of 600 x 600 mm , perimeter runner/ channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab/ roof, wall angle etc with and including all fixing accessories and making good of disturbed wall surrfaces with POP and one coat of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.

M&L for metal false ceiling, lay-in type, 0.5mm thick having tegular edge profile , duly powder coated, perforated type with glass fiber acoustic fleece, suitable for false ceiling grid/ frame module of 595 x 595mm size complete all as specified and directed by Engr-in-Charge.

S&F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and complete all as specified and directed by Engr-in-Charge.

S&F solid PVC leepping of 2mm wood grain finish PVC sheet is heat bent as as liping on the edges of doors, windows & other edges inclusive solvent cement and fixing at site complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified and directed by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified and directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bends/tee any radius complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends/tee any radius complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bends/tee any radius with access door complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends/tee any radius with access door, complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass chromium plated bottle traps 32mm bore of trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed and 32 mm PVC pipe for disposal of waste water upto reqd length, complete all as specified and directed by Engr-in-Charge.

S&F in repair white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed by Engr-in-Charge.

S&F in repairs plastic water closet seat, water, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 9-10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified and directed by Engr-in-Charge.

S&F in repairs white vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed by Engr-in-Charge.

S&F urinal spreader of CP any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and directed by Engr-in-Charge.

S&F 32mm dia and suitable length PVC waste pipe including tail suitable for urinals/wash basin etc, complete all as specified and directed by Engr-in-Charge.

SS&F in repairs bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs stop valves/angle valve, cast copper alloy, fancy type, chromium plated , screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs two way angle cock chromium plated, complete all as specified and directed by Engr-in-Charge.

S&F in repairs WHB mixer without pop up waste system, long body, made of cast copper alloy, chromium plated, fancy type, suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450mm, complete all as specified and directed by Engr-in-Charge.

S&F in repair tubular towel rail stainless steel chromium plated 20 mm dia D type 60 cm long between flanges, including brackets and fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F in repairs health faucet (ABS body) mild steel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engr-in-Charge.

S&F in repairs soap dish, brass CP any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

S&F in repairs toilet paper holder of brass, cromium plated fixed to walls with chromium plated (CP) brass screws,complete all as specified and directed by Engr-in-Charge.

S&F in repairs SS glossy finish grating of square shape of size 150mmx150mm with hinge type openable jali of 100mm dia size with and including fixing with cement mortar to floor/ nahani trap etc, complete all as specified and directed by Engr-in-Charge.

S&F in repairs corner glass shelf with bracket and fixing accessories, complete all as specified and directed by Engr-in-Charge.

M&L for dismantling stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

M & L for 16-18mm thick granite of any type (table rubbed & polished) in jambs, pillars verticle surface, window cills, plateforms including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Emgr-in-Charge. (Note: Screed bed /backing plaster shall be paid separate).

Providing edge moulded 16-18 mm thick stone/grainate etc including machine polishing to edge to give high glossing finish etc complete all as specified and directed by Engr-in-Charge.

Providing and fixing in repair aluminium composite panels cladding of approved make having total thickness of 4 mm (Top coil -0.5mm , non Toxic & FR PE - Core - 3 mm and back Coil -0.50 mm ) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil ( 4-7 microns ) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular / circular columns ,suspended ceiling Cills , jambs ,canopy with including neccessary aluminium frame ,scafolding etc and making 12 mm to 20 mm wide grooves and applying non staining and non streaking sealant of Dow corning ( 789 or 991 HP) and backing rods complete as specified and directed by Engr in charge . Only exposed surface shall be measured and paid for ACP Material shall be for exterior/ interior application & shade as approved by Garrision Engineer .

S&F in repairs sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass CP sink mixture wall mounted of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, complete all as specified and directed by Engr-in-Charge.

Cutting opening in cement concrete walls with or without reinforcement (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar including all quions arches pillars etc. complete all as specified and directed by Engr-in-Charge.

M & L Brick work with sub class B brickstaight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specified and directed by Engr-in-Charge.

M&L brick work built in cement mortar (1:4) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel wall mounted support toilet grab bar vertical swing (400mm x 35mm) or foldable of size (605mm x 100mm x 35 mm dia) including fixing accessories complete all as specified and directed by Engr-in-Charge.

S & F Solar control film 25micron reflective type sticked to glass panes exc. 1.5 sqm as per instruction of manufacturers complete all as specified and directed by Engr-in-Charge.

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan/plug/bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof/ wall/ floor by applying putty and applying colour/ white wash finish complete all as specified and directed by Engr-in-Charge.

M & L for point wiring concealed type for modular switches with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed copper conductor FRLS cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, copper conductor FRLS cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch.

All as per ser items No. 98.00 here-in-before but One 3 Pin socket outlet 5 Amps on Independent board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 98.00 here-in-before but One 3 Pin socket outlet 5 Amps on same board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 98.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in existing conduit including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including modular GI metal flush box of 1.6 mm thick suitable for modular/ conventional switches/ sockets/ fan regulators, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps complete all as directed. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

All as per ser items No. 102.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the independent board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 102.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the same board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 102.00 here-in-before butwith 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point on Independent board complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in PVC casing & caping including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including modular MS sunken box flush/surface mounted, modular white cover plate with frame, blanking plate, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps complete all as directed. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

All as per ser items No. 106.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the independent board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 106.00 here-in-before butpoint wiring for one socket outet point 3 pin 5 amps on the same board complete all as specified and directed by Engr-in-Charge.

All as per ser items No. 106.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point on Independent board complete all as specified and directed by Engr-in-Charge.

S & F Modular Switch 1 way 16 A, 1 Module complete all as specied and directed by Engr-in-Charge.

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed by Engr-in-Charge.

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specifieed and directed by Engr-in-Charge.

S & F Modular fan regulator step type, 120W 2 Module complete all as specified and directed by Engr-in-Charge.

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed by Engr-in-Charge.

Supply of surface/wall mounted 20W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards and complete all as specified and directed by Engr-in-Charge.

Supply of surface/wall mounted 10W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP40 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 110 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs .The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C. The luminaire shall pass electric strength test. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards and complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair of recessed 36 W LED 2X2 panel backlit type only. Luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have CRI ≥ 80 and CCT 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 3.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards complete all as specified and directed by Engr-in-Charge.

Taking down of existing LED light of any size/capacity, fire alarm system incuding panel, detectors, music speaker, AC diffuser etc and refixing it complete including all fixing accessories complete all as specified and directed by Engr-in-Charge.

Taking down carefully ceiling / exhaust fan of any size, sealing cable end, dismantling blades & removing fan and blades to store complete all as specified and directed by Engr-in-Charge.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-Charge.

Painting of ceiling/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed by Engr-in-Charge.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-Charge.

ACR ENTERPRISES (BID ID -3280068)

B.R. Enterprises (BID ID -3280161)

R D ENTERPRISES (BID ID -3280964)

HARICHAND CONSTRUCTION (BID ID -3278543)

VIJAY KUMAR GUPTA (BID ID -3280560)

GLOBAL DEVELOPERS COMPANY (BID ID -3280440)