SPECIAL REPAI REPLACEMENT OF PUMPING AND DISTRIBUSTION SYSTEM OF WATER SUPPLY AT PH NO 2 3 AND 4 AT AFS SAMBRA

Amount

Excavation in trenches not exceeding 1.5m width & not exceeding 1.5m depth and getting out in hard / dense soil for laying cable/erecting poles etc complete all as specified and directed.

Returning and filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point.

M & L cutting /breaking of cement concrete path or bituminous road of any thickness any specification, 45cm width and 60cm depth excavation for taking up/down of DI/GI/CI pipes and connection and refilling back, ramming, watering etc complete with top 20cm thickness shall be PCC 1:2:4 type B1 Using 20 mm graded stone aggregates to match with the existing surfaces complete all as specified as directed.

Taking up or down C I / M S water main 150 mm dia pipe along with fittings & fixtures such as tee, bends etc fixed to walls, ceilings or laid in floors / trenches including removal from site complete all as specified as directed.

Taking up or down C I / G I / M S water main 100 mm dia pipe along with fittings such as tee, bends etc fixed to walls and ceilings or laid in floors / trenches including removal from site complete all as specified as directed.

Taking up or down G I / M S water main 80 mm dia pipe along with fittings such as flange, tee, bends etc fixed to walls and ceilings or laid in floors / trenches including removal from site complete all as specified as directed.

Taking up or down G I water main 50 mm dia pipe along with fittings such as tee, bends etc fixed to walls and ceilings or laid in floors / trenches including removal from site complete all as specified as directed.

Supply and laying Ductile iron pipe 150 mm nominal dia, class K-9, spigot and socket including Rubber joints complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and laying Ductile iron pipe, 100 mm nominal dia, class K-9, spigot and socket including Rubber joints complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and laying Ductile iron pipe150 mm nominal dia, class K-9, flanged type, including rubber gasket packing, suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces etc complete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and laying Ductile iron pipe 100 mm nominal dia, flanged type, class K-9 including rubber gasket packing, suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces etccomplete all as specified and as directed. Note :- Specials and fittings will be measured and paid separately.

Supply and fixing Mild steel pipe 150 mm dia including MS Flange, heavy grade including rubber gasket packing suitable nuts, bolts, washers all fittings like brackets of any angle, short pieces, welding the flanges to M S pipe including applying two coats black synthetic enamel paint over one coat of red oxide primer externally on the pipe line, testing and commissioning all as specified and directed

All as per item No 13 but 100mm dia M S pipe

All as per item No 13 but 80mm dia M S pipe

S & F Galvanised iron tubing 80 mm dia bore, medium grade with all connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc laid in trenches for complete all as specified and as directed

All as per item No 16 but 50mm dia G I pipe

S & F Ductile iron fittings such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch ‘Y’ junction, double branch, cross (all socket or socket and spigot or flanged and socket etc) color, caps and plugs suitable for DI/CI pipe upto 150 mm dia complete all as specified and as directed.

M & L Pre-cast cement concrete 1:2:4 type B1,using 20mm graded stone aggregate as in solid block masonry exceeding 10cm in width and setting in cement mortar 1:6 all as specified and as directed.

M & L Construction of Valve pit chamber of size 1000x1000x1000mm (internal) with PCC 1:3:6 type C2 using 40mm graded aggregate for foundation, brick work 230mm thick in cement mortar 1:4 for wall, 50mm thick cement concrete 1:2:4 type B-I as coping, 10mm thick cement mortar 1:4 for plastering internally and externally, 3.15mm thick MS sheet cover with 25 X 3mm thick MS flat iron welded around and across tfixed on angle iron 50x50x6mm thick for frame with locking arrangement and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, three coats of white wash inside / out side wall surfaces, demolition of existing unserviceable valve pit chamber complete all as specified and directed.

Supply and fix in repair cast iron sluice valve suitable for 150 mm dia Pipe, PN 1.6, both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged including new rubber gaskets, bolts and nuts etc including taking down existing unserviceable valve complete all as specified and directed

Supply and fix in repair cast iron sluice valve suitable for 100 mm dia Pipe, PN 1.6 with both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged inclding new rubber gaskets, bolts and nuts etc including taking down existing unserviceable valve complete all as specified and directed

Supply and fix in repair cast iron sluice valve suitable for 80 mm dia Pipe, PN 1.6 with both ends flanged confirming to the IS 14846 with brass spindle and iron wheel head flanged inclding new rubber gaskets, bolts and nuts etc including taking down existing unserviceable valve complete all as specified and directed

Supply and fix gun metal globe or gate valves suitable for 50 mm dia pipe with iron wheel head, screwed both ends for iron pipe fixed of sizes including taking down old unserviceable valve complete all as specified and directed

S & F in repair Cast iron Non return butterfly valves of size 100mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed.

S & F in repair Cast iron Non return butterfly valves of size 80mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed.

S & F in repair Cast iron Foot valve of size 100 mm dia, ball type threaded non return valve type with strainer complete all as specified and as directed.

S & F in repair Cast iron Foot valve of size 80 mm dia, ball type threaded non return valve type with strainer complete all as specified and as directed.

S & F stainless steel Pressure gauge 4" dial, -1 bar to +1 bar pressure measurement connectted to suction side of pump set complete all as specified and as directed.

S&F stainless steel Pressure gauge 4" dial, 0 bar to +16 bar pressure measurement connectted to delivery side of pump set complete all as specified and as directed.

Taking down G I 25 mm dia pipe along with fittings such as tee, bends etc fixed to walls and ceilings and connections including removal from site complete all as specified as directed.

S & F Galvanised Iron tubing 25 mm dia bore, medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F Stop valves 25mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

M/s. VIJAY ELECTRICALS

RAHMAT ALI