SPECIAL REPAIR TO INTERNAL WIRING OF BLDG NO SM-13 (NAVDEEP BLOCK) AND 13A INCLUDING RENOVATION OF 03 X TOILETS AT CMM UNDER GE (EAST) JABALPUR

Amount

Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, PCC block masonary built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for Brick work with old size flyash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on internal surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Glazed ceramic tiles (300 x 600) x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rates are including rounding and moulding complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25 mm thick over 20 mm thick screed bed in CM, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling wall and ceiling boards/wall cladding (fibre, pulp, insulation etc) any thickness, including cover fillets complete all as specified and directed.

S&F Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles with 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system and necessary complete all as specified and directed.

Taking down chowkhat n.exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed.

Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (weight 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (weight 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (weight 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.

Taking down chowkhat exc 1.5 sqm and n.exc 4.00 sqm each without taking of shutter from frame complete all as specified and directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick particle board (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 150mm long brass handle, cast type, polished bright and fixed complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts, with barrel of extruded section and fixed complete all as specified and directed.

S&F 300 mm long brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F door closer hydraulicallly regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and weigh between 61 to 80 kgs and fixed of aluminium (extruded section body) complete all as specified and directed.

S&F in repair vitreous china water closet, wall hung pattern of size 515mm x 355mm x 365mm, white in colour with UF seat cover including slim concealed cistern with floor mounting frame, installation kit and drain pipe connection set and control plate Moon Design all chrome with all accessories complete all as specified and directed.

S&F in repairs vitreous china urinal, Half stall type white, with grating and union etc complete all as specified and directed.

S&F in repairs vitreous china white counter oval shape wash hand basin of size 630mm x 450mm incliding brackets complete all as specified and directed.

S&F in repair aquisense sensor faucet for wash basin with 200 mm long spout (wall mounted model) for table top/counter type wash hand basins including all necessary fittings etc complete all as specified and directed.

S&F in repair aquisense sensor concealed type flushing valve for urinal complete set with installation box with control cock and urinal spreader including all necessary fittings etc complete all as specified and directed.

S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.

S&F in repairs for brass chromium plated, 15 mm bore health foucet, (flexy type) 1.00 mtr long complete all as specified and as directed.

S&F in repairs for brass chromimum plated two way bib cock fancy type, 15mm bore complete all as specifed and directed.

S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank ISI marks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tanks complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.

Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.

S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.

S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.

S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia etc complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil emulsion distemper over a coat of primer including average 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer including average 3 mm thick wall care putty complete all as specified and directed.

S&F in repairs toilet paper holder fixed to walls with brass chromium plated (CP) brass screws complete all as specified and directed.

Cutting chases, pinning in stone/concrete block or slab walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches. Ceiling roses, pendents, Regulator Socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed.

Point wiring PVC insulated and PVC sheathed multistranded FRLS copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provision of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

One 5 Amps light/fan/bell point controlled by one way switch.

One 5 pin socket outlet 5 Amps on independent board.

One 5 pin socket outlet 5 Amps on same board.

All as per item srl No 58 above but wiring with 2.5 Sqmm FRLS copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet.

All as per item srl No 58 above but wiring with 6 Sqmm FRLS copper wire including earth wire 6 Sqmm of copper for 3 pin earth plug and socket outlet.

M&L for sub main wiring with two run of 2.5 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 2.5 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster for the following complete all as specified and as directed including taking down old unserviceable one.

All as per item srl No 61 above but wiring with 4.0 Sqmm FRLS copper wire including earth wire 4.0 Sqmm of copper

All as per item srl No 61 above butwiring with 6.0 Sqmm FRLS copper wire including earth wire 6.0 Sqmm of copper

S&F Modular Switch 1 way 6 amps,1 module complete all as specified and directed.

S&F Socket out let 6 Amps-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Switch 1 way 16 Amps,1 module complete all as specified and directed.

S&F Socket out let 6/16 Amps - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular Electronic regulator 100/120 Watt step type complete all as specified.

S&F LED lumanaire 600mm x 600mm 36 Watts 220V AC recessed type with high Efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete as specified and directed.

Supply and fixing LED lights fitting 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F round shape 6 Watt 220V recessed type with high Efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed.

Taking down carefully ceiling fan/Exhaust fans/Air circuletor fan/Wall mounting fan fitted at site removing fans are diposited to E&M store for keeping in safe custody for re-use at site complete all as specified and directed.

Hanging only ceiling fan (M.D supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking out existing old, unserviceable distribution box / sheet metal enclosures of any size and making good the disturbed surfaces as per existing complete all as specified and directed.

S&F Double pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB complete with MCB SP 20 Amp, flush mounting type complete all as specified and directed. Make - LEGRAND/ABB/L&T

Supply & fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed.

Supply & fix exhaust fans, Steel body AC single phase, 230 V of size 300 mm sweep with blades, frames and louver complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings with 9 watt LED bulb glass type complete all as specified and directed.

M&L ceiling rose, surface bakelite three terminal complete all as specified and directed.

S&F in repair Isolator/ MCB single pole 6 Amps to 40 Amps, C series complete all as specified and directed.

S&F in repair MCB single pole & Neutral 6 Amps to 40 Amps, C series complete all as specified and directed.

Supply and laying or fixing or passing through pipe cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade having cross sectional area 150 sqmm 3.5 core complete all as specified and directed.

Supply and laying or fixing or passing through pipe cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade having cross sectional area 120 sqmm 3.5 core complete all as specified and directed.

Supply and laying or fixing or passing through pipe cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade having cross sectional area 95 sqmm 3.5 core complete all as specified and directed.

Supply and laying or fixing or passing through pipe cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade having cross sectional area 70 sqmm 3.5 core.

M&L distribution board made out of CRCA sheet, powder coated, vertical type, double door, 4way, including fixing in the wall after chase cutting and making good the surface by necessary patch work and surface finish as per existing including making connections complete all as specified and directed containing and including the following :- (a) MCCB, 4 pole, 100 Amps, 16 KA breaking capacity with thermal release - 01 No (In coming). (b) Bus bar, 400 Amp rated, made out of aluminium duly insulated with adhesive tape RYB and black -04 Nos. (c) MCB SPN 63 Amps - 2 Nos and MCB SP 40 Amps - 02 Nos (Out going). (d) Connection from MCCB to bus bar shall be made with aluminium strip of suitable size complete all as specified and directed.

Supplying and fixing in replacement sheet metal enclosure for DB’s SPN 8 way vertical type with 200 Amps rated busbar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed.

Supplying and fixing in replacement sheet metal enclosure for DB’s TPN 4 way vertical type with 200 Amps rated busbar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. when MCB’s to be used of 415 volt, 4 ways, without 200 Amps bus bar with MCB 63 Amp FP complete all as specified and directed.

Repair/ Maintenance of Floor mounted cubical type LT feeder pillar box of various sizes including disconnecting all in coming and outgoing connection after taking necessary shut down, cleaning the carbon/rust from busbar, re-thinbling with new lugs/thimble of existing size including and segregating the serviceable and un serviceable items with removing old burn out wiring and re-fixing the existing position replacement of un-serviceable parts including rewiring and PCC works around the feeder pillar box complete all as specified and directed.

Supplying and fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

Supplying and fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

Supplying and fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

Supplying and fixing in replacement MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA

Material & Labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to pole or any other indicated situation for loop earthing etc as required 32mm x 6mm Galvanised Iron strip complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI earth wire 4.00mm dia and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type, LT FEEDER PILLAR BOX of size not less than 2 m width x 1 m heigth x 0.5 m depth, made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc and embedded with 50 x 50 x 6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs and cable glands PCC Foundation in Cement Concrete 1:3:6 (20 mm Graded crushed Stone Aggregate) and Testing after Installation including complete all as specified and comprising of the following :–

(i) Aluminum bus bar 400 Amps - 01 Set

(ii) MCCB 320 Amps,4 pole 36 KA, Adjustable thernal & fixed magnetic setting (Incoming)- 01 No.

(iii) MCCB 160 Amps,4 pole 16 KA, Adjustable thernal & fixed magnetic setting (Outgoing)- 01 Nos.

(iv) MCCB 100 Amps,4 pole 16 KA, Adjustable thernal & fixed magnetic setting (Outgoing)- 02 Nos.

(v) MCCB 120 Amps,4 pole 16 KA, Adjustable thernal & fixed magnetic setting (Outgoing)- 01 Nos.

(vi) 3 Phase LED Digital Ammeter Class 1.0

(vii) 3 Phase LED Digital Voltmeter Class 1.0

(viii) Indicator Lamp- 03 Nos

S&F On load Manual change over switch 415V in sheet metal enclosure 4 pole of capacity 400 Amps complete all as specified and directed.

S&F Cast Aluminium architectural Designer Poles (6.5 - 7 feet long) painted with polyurethane paint and with suitable cast aluminium designer pole brackets and 2 Nos of post top lanterns with lights including excavation, returning filling and remoal of soil including PCC 1:2:4, type B-2, 40mm thick crushed stone aggregate complete all as specified and directed. Make-Mepro/Bajaj/Havels/Philips. Note :- Foundation for pole of PCC size 50 x 50 x 85cm, 40 cm above ground level and 45 cm below ground level including plaster of surface will also included in quoted rate.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 3 KW capacity 6 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

Excavation in trenches for laying of cables, poles and stay n.exc 1.5 mtr wide and n.exc 1.50 mtr deep and getting out in soft/loose soil complete all as specified and directed.

Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removing excavated materials n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and lay unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified and directed. Note : Maesurement shall be done after puning down of sand.

Supplying and laying reinforced precast concrete cable cover, class EHV, Type 1 with peak size 450mm x 260mm x 50mm complete all as specified and directed.

Schedule of credit amount of Rs. 65,679.00 to be deducted during AOC.

RAVINDRA ELECTRICAL

Goodluck Enterprises