Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹27.7 L+₹1.7 L (6.65%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹27.9 L
EMD Value
₹55,800
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Provn of double entry gate pass sys at SASF Odianwali and Other sanctioned works at Military Station Fazilka
2022_MES_543665_1
GE ABH-29/22-23
Open Tender
Civil Works
Item Rate
180 days
Fazilka Mil Stn
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Garrison Engineer Abohar
₹55,800
Yes
28 Oct 2022
5 Aug 2022
5 Sept 2022
5 Aug 2022
2 Sept 2022
19 Aug 2022
Amount
SCHEDULE 'A' SECTION I (B&R Portion)
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil
Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required
Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
M&L PCC in foundations, filling and mass-concrete type D2(1:4:8)using 40 mm graded stone aggregate
Brickwork with fly ash bricks straight or curved on plan exc 6 m in CM 1:6
Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:6
S&F 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork ,applying evenly a coat of blown type bitumen at the rate of 1.5kg/per sqm and binding with clean dry sand @ 0.05 cum per sqm, polythene film, 150 micron thick,laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.mtr complete all as specified and directed.
M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface and
M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface
M&L RCC M-25 design mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
M&L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts
M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality
M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete
Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat
Formwork to sides of pillars, posts, struts, piers, columns, & stanchions Rough finished surfaces of concrete Square, rectangular or polygonal
Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat
Hardcore of Broken brick bats n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface
M&L 75 mm thick PCC type C-1, (1:3:6) using 40mm graded stone aggregate Finished even & smooth without using extra cement as in plinth protection
M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement)
Applying three coats of white wash on new Ceiling surface including preparation of surface.
Applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work over one coat primer and one coat of wall putty.
Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F only Butt hinges 100mm size, medium weight, cold rolled mild steel.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.
S&F Aluminium handles 125mm size, cast type, anodised
S & F in repair powder coated aluminum sliding window three track with frame & two glass shutter using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminum powder coated section aluminum cleat , PVC track, bearing, handle lock rubber beading etc complete fittings as approved. Note :- Size of aluminum section shall be under – (i) three track top and vertical – jindal main 2010. Section No 20621 or equivalent as approved by GE. (ii) Three track bottom – Jindal main – 2010 section 20620 or equivalent as approved by GE. (iii) Shutter Vertical Section - Jindal main – 2010 section 20604 or equivalent as approved by GE. (iv) Shutter top and bottom - Jindal main – 2010 section 20604 or equivalent as approved by GE. (v) Shutter vertical middle ( interlock) - Jindal main – 2010 section 20605 or equivalent as approved by GE.
S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified
S&F anodised aluminium door shutter , aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber eoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc.
S&F aluminum anodized grill diamond shape aperture of round bars including necessary joining cleats, clips anodised complete all as specified.
S&F in repairs door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed.
M&L 100mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate)
M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm, in skirting set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 10mm thick rendering (1:4) complete all as specified and directed by Engineer - in - Charge.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650micron Note: 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paid only after receiving of the warrenty certificate from the company.Make : Asian paint or equivalent as approved by GE
S&F Vitreous China wash down water closet pan (Pedestal pattern) white excluding fixing bolt incl plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and jet spray complete fixed in repair.
S&F in repair PVC low level flushing system 10 Ltr capacity with flush pipe complete as approved by Eng-in charge.
M&L Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed
M&L Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F Vitreous China wash basin, white, oval shape, size 505x425mm counter sunk ,excluding taps, waste chain & plug & porcelain stopper but including brackets, CP, brass, Waste fittings 32mm bore & PVC Waste Pipe 32 mm bore
S&F bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .
S&F 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe
S&F Angle Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions
S&F PVC connections 15mm size with PTMT nuts of length 450mm
S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity
S&F Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions
S&F Ball valves PTMT 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule
Supplying and laying of CPVC pipes 25mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acces door
S&F 75mm PVC (SWR) vent cowl
S&F 110mm PVC (SWR) 'P’ trap
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
Material and labour DWCPE pipe 150 mm dia ( 160 mm OD) completed laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/union/socket etc complete laid on PCC bed 150mm thick PCC in 1:3 type C2 of avg depth 0.90 to 1.65 m depth incuding packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed.
M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate
Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)
M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extgra cement including forms, moulds mitred/stopped ends etc.
M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound 3% by weight of cement finished even & smooth without using extra cement ( WPC shall be measured & paid separately)
M&L Rendering 10mm thick on fair face of brick work/concrete surfaces in CM (1:4)
Supplying only Integral waterproofing compound
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.
M & L for steel bars of TMT Fe 500D 6mm to 8 mm dia cut to lenght bent to Shape required, incl cranking, bending spirally for hooping for columns, hookng ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Washed stone grit plaster coloured/pigmented type on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden attens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
S & F Mild steel work swan neck, angle iron & flat iron including embedding in concrete and screwing etc, including cutting tops to shape as directed, bent to shape, drilling holes, notching for wire etc, Including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F mild steel screw bolts 16 to 20mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing comple
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (GdeE- 250) qualityA
S&F Cast iron work grade FG 150, machined, in pulleys and similar articles n exc 5 kg
M & L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed
S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)
M & L Broken glass coping on top of wall 25mm layer of cement mortar (1:3) with a rounded or weathered finish and before the mortar has set, glass (of bottle or thick glass) broken to approximately 63mm gauge, shall be firmly embedded at the rate of 10 Kg of glass per square metre of rendered surface, jogged edges of the glass being left projecting complete all as specified and directed.
S&F concertina coil 600mm dia 10mtr openable length having 50nos round per 6mtr length over wall with existing Y shaped angle iron tied with necessary bolts, dia of wire 2.5mm, blade thk 0.5mm, blade length 12mm, width 15mm and spacing 26mm complete all specified
M&L for factory made pre-cast concrete (1:2:4) type B1 using 20mm graded stone aggregate as block masonay with solid blocks, exc 10 cm in width and setting in CM (1:6) complate all as specifed and directed.
Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each and refixing the shutter in same opening all as specified and directed by Engineer-in-Charge.
S&F 125 mm size hasp and staple,aluminium anodished,including bolt to hinge plate and fixed with screws,complete all as directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification including fitting i.e. magnetic catcher,stainless steel handle approved by Engineer -in-Charge.
S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.
M&L 18/19 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by Engineer-in-charge.
S&F 25 mm dia drapery curtain road with decoative end knobs complete with brackate and fixed to walls complete all as specified and directed by Engineer-in-Charge.
M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
SCHEDULE 'A' SECTION-II (E&M PORTION)
M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/exhaust fan controlled by one modular switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).
All as per Srl item No. 109 here-in-before but one three pin socket outlet 5 Amps on the independent board complete all as specified.
All as per Srl item No. 109 here-in-before but one three pin socket outlet 5 Amps on the same board complete all as specified.
M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore modular type switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.
S&F switch modular type single pole one way 5 Amp,230 VAC supply.
S&F modular type socket two in one ,3 Pin 5 Amps 230 VAC supply, .
S&F switch modular type single pole one way 15 Amp, 230 V, AC Supply.
S&F socket Modular type 6 Pin 16 amp,230 VAC .
M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
S&F of fan regulator step down electronic type heavy duty modular type 230 volts AC.
S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.
S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..
Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)
S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 6 sqmm cable and will be measured as one length).
Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge
Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .
M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.
M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable all as specified and directed by Engineer-in-Charge.
M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)
M&L for Boring hole across the Road/plinth/hardstanding/path/drain/pavement etc., suitable for inserting GI pipe(Light grade) of upto 100mm dia bore pipe for cable passing without damaging existing Raod/path/hardstanding/floor by manual using trenchless technology tools/necessary equipment complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core
M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).
Supply and fixing BLDC type ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE 5 star rated complete all as specified and directed by Engr-in-Charge.
Supply & fix Air freshner exhaust fan complete with connecting accessories 230 V, 250 mm sweep.
M&L for series of downlighters of capacity 12/15 Watt with low depth square shape powder coated white finish with drop down PC diffuser to deliver low glare ilumination with optimized heat sink fo efficient heat dissipation and separate replaceable electronic driver suitable for office & retail spaces complete all as specified and directed by Engr-InCharge Make:SYSKA SSK_SDS12W-N or equivalent in Havlls/Crompton Greaves/Bajaj/ Philips/Wipro as approved by GE.
G S CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .