Satara Indl Area Painting and Misc. Repairs for first floor quarters at CFC

Painting and Misc. Repairs for first floor quarters at CFC.

Scrapping the old plastered internal surfacewith sand paper and coating theentire surface with mixture of whiting or glue and linseed oil including scaffolding etc.complete as directed.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces includings caffolding if necessary,preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand paper in gas required etc. complete.

Providing and applying plastic emulsion paint of approved quality,colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.

Providing and fixing 1.5 mm thick poly venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete

Providing and fixing in position (as per1868/1982)Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre..Top and side track section 92x 31.75 x1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom40 x 18 x 1.25mmatweight0.417Kilogram/OneRunningMetre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete.With colour Anodising with box

Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with12mm thick three layered flat pressed teakwood particle board bonded with BWP type exterior grade phenol formaldehyde syntheticresin conforming to IS129231990, laminated on both sides, Nova teak or equivalent with aluminium glazing clips of size 12 mm x 12mm (conical) as per drawing etc. complete

Providing and fixing solid core flush doors shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed , all necessary beads,mouldings and lipping,wrought iron hold fasts,chromium plated fixtures and fastenings,with brass mortise lock,chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing & Fixingin position, Acoustical Panelling made from 12 mm wp Plywood & 1.5 mm laminate on, 50x50 mm Sal-wood frame of 600 x 600 c to c having wooden support s from wall of required length , in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side,including cost of required Cut-Outs,decorative mouldings / finishing-items / paint & Scaffolding,as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete

Providing & Fixing Aldrop Stainless steel 300*16mm

Providing & Fixing Door closer

Providing & Fixing Handle 150mm Brass Chromium plated

Providing & Fixing Sliding Door Bolt Stainless Steel 12mm dia. 250mm length

Providing & Fixing Tower bolt M.S. Chromium plated 10mm dia,length 200mm

Providing & Fixing Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty)

Providing & Fixing Door Stopper Stainless Steel

Providing and laying ceramic tiles having size 30 cm .x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing European type Colour glazed earthen ware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe upto the out side face of wall 10 litere name led low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia.UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC over flow pipe,mosquito proof couplingsG.I. chain and pulley,with waterJet and fitting including cutting andmaking good to the walls and floors testing etc.complete.(prior approval of sample and brand byEx.Engineer isnecessary before use)

Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C.waste pipe and trap upto the out side face of the wall.Making good the damaged surface,testing etc. complete.

Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channel shal fround G.S.W.pipes,Brick Masonry,plastering from inside and air tight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete.

Point Wiring (WG-PW)

Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW

Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW

Point wiring for independent plug, concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW

Modular switches and Accessories

Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete.

Bunch of Wires (WG-MA/BW)

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Supplying & erecting mains with 2x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no. WG-MA/BW

Indoor LED Fittings (FG-IDF/LED)

Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED

Accessories for Indoor Fittings (FG-AS)

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block / sunmica block of suitable size.

Fans (FG-FN)

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 600 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8, PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in positionas per specification no. FG-FN/CF.

Accessories for Fans (FG-FAS)

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.

Air Conditioners (AP-AC)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC

LT - MCBs/ MCB Change Over Switch (SW-MCB)

Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB

Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB

LT - MCBDBs (SW-MCBDB)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.

Networking Components (WG- NWC)

Supplying, fixing, and configuring 24ports,PoE switch compliant with IEEE 802.3 standards with min. 193 W PoE capacity with 4 GESFP uplink in provided rack as per specification no. WG-NWC/ENS

Networking Accessories (WG-NAS)

Supplying and fixing Cat 6A 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC11810 complete as per specification no. WG-NAS/PP

Rebeat for dismenteleld scrap item like old door,wiring,fan,windows etc

Please Enable Macros to View BoQ information