Quantum of works for Construction of 11 KV line of M/s India Oil Corporation Ltd. Add. Sudha Filing Station Kanpur- Lucknow Haiway and Swagat Retail Outlet Add. Jagdishpur Ajgain Block Nawabganj, Tehsil Hasanganj Distt. Unnao

Amount

(A) Cartage and Erection Carriage of following materials from Electricity store center Unnao to dump work site along with loading, unloading and proper stocking as per requirement. Distance 0-50 Km.

ST Pole of diff. size

HT XLPE Cable 3x70/3x120 sq mm 11 KV

L.T. Aluminum XLPE Cable 3.5x240 sq. mm

Distribution Transformer 250 KVA

Other loose line materials including conductor, GI/stay wire, double Pole accessories, complete stay & earthing, insulator, MS channel angle cable Jointing Kit etc.

Erection of S.T. double pole structure including digging of pit and fitting of all accessories with its cartage dump site as per RESPO Norms.

Making of H.T. Section points by brackets, clamps & Making of T-off arrangement for including fabrication and fitting of all accessories.

Fabrication/ Modifications of MS Items, Nuts & Bolts as per requirement of site conditions.

Placement of 11/0.433 KV Distribution Transformer from dump site to newly constructed T/F plinth and Installation cable termination and commissioning of 250 KVA Transformer including dressing damaged cable, lugs , Jumpering & connecting Earthing of body & neutral as per required. (required material as lugs, flat copper L plate, nuts & bolts etc. for above job shall be provided by contractor)

Construction of T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.5 x 1.5 x1.2 meter solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth.

Fabrication and erection of Distribution Transformer fencing of frame size 3x2.4 Mtr. Including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 1OSWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust.

New Earthing for Distribution transformers one neutral and one for body of transformer 40 ft. deep GI pipe of size 40 mm, making all arrangements for its recharging funnel with open able cover of steel chequered plate with hinges and making connections to transformer neutral/body by GI strip of size 35x5 mm after complete running welding and connecting with pipes by clamps/nut bolts and welding.

Grouting of S.T. pole as per RESPO norms with grouting materials.

Earthing of S.T. Pole as per RESPO norms.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO norms with grouting of materials.

Laying of 11 KV cable size 3x70 sqmm/120 sq mm, dragging of trench 1050 mm, deep 520 vide including all materials etc./ overhead on pole as required on site.

Laying of LT cable of size 3.5x240 sq mm from transformer to meter room then proper connection both side.

Making of cable box for 11 KV 3X70/3x120 sq mm cable jointing Kit/Cable box

Cable Hosting at Pole with GI Pipe dia 6" jumpring of cable proper Mounting of cable box outdoor 3x70/3x120 sq mm crimping lugs etc.

Fixing of Danger board with Barbed wire on new ST Pole.

Painting of New ST Pole with aluminum Paint

Plinthing RCC half round muffs for STP Pole

(B) Following Materials to be Provided by contractor

Holding clamps for ST pole with Nuts & Bolts.

Holding clamps for G.I. Pipe with Nuts & Bolts.

Stay Clamps for ST pole with Nuts & Bolts.

G.I. Pipe 6” dia

Red Oxide

Aluminum Paint

Danger Board with clamp

Barbed wire

M/S RATHORE ELECTRICALS (BID ID -5539014)

S S Enterprises (BID ID -5536786)