Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | ₹12.6 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹13.3 LRejected-Finance | ₹13.3 L | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹15.1 LRejected-Finance INDEX NO E 174 HQ 133 WE R O NEW COLONY VIZER WAGOORA BARAMULLA KASHMIR J K 193103 | BARAMULLA | JAMMU AND KASHMIR | 193103 | ₹15.1 L | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹16.5 LRejected-Finance | ₹16.5 L | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹17.2 LRejected-Finance | ₹17.2 L | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | FM Trading Corporation L7 | M/S RATHER STEEL WORKS L6 | rafiq trading co L5 | M/S BHAT TRADERS L1 | M/S M.S TANVEER ENTERPRISES L4 | M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR L2 | M/S MUSHTAQ AHMAD BHAT L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. | 428 | Sqm | 8 ₹3,424 | 5 ₹2,140 | 10 ₹4,280 | 8 ₹3,424 | 10 ₹4,280 | 10 ₹4,280 | 10 ₹4,280 |
| 2.00 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 400 | Sqm | 700 ₹2.8 L | 650 ₹2.6 L | 715 ₹2.9 L | 500 ₹2 L | 700 ₹2.8 L | 650 ₹2.6 L | 400 ₹1.6 L |
| 3.00 | S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified complete all as specified and directed. | 28 | Sqm | 450 ₹12,600 | 400 ₹11,200 | 730 ₹20,440 | 400 ₹11,200 | 500 ₹14,000 | 300 ₹8,400 | 400 ₹11,200 |
| 4.00 | Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed. | 44.2 | Cum | 35 ₹1,547 | 80 ₹3,536 | 15 ₹663 | 50 ₹2,210 | 40 ₹1,768 | 50 ₹2,210 | 199 ₹8,795.80 |
| 5.00 | M&L Chequered cement concrete tiles 20cmx20cmx25mm thick as in path etc. set and jointed with grey cement and pigments as in floors and over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. | 120 | Sqm | 600 ₹72,000 | 600 ₹72,000 | 650 ₹78,000 | 600 ₹72,000 | 600 ₹72,000 | 300 ₹36,000 | 600 ₹72,000 |
| 6.00 | M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in leveling coarse of flooring complete all as specified and directed | 120 | Sqm | 170 ₹20,400 | 150 ₹18,000 | 120 ₹14,400 | 80 ₹9,600 | 150 ₹18,000 | 100 ₹12,000 | 100 ₹12,000 |
| 7.00 | M&L cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in coping, weathering, slightly rounded or chamfered angles and throating, benching complete all as specified and directed. | 0.5 | Cum | 3,800 ₹1,900 | 150 ₹75 | 2,100 ₹1,050 | 2,000 ₹1,000 | 4,000 ₹2,000 | 2,500 ₹1,250 | 4,000 ₹2,000 |
| 8.00 | M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in mass concrete and foundation filling complete all as specified and directed. | 21 | Cum | 1,500 ₹31,500 | 3,500 ₹73,500 | 1,500 ₹31,500 | 300 ₹6,300 | 1,500 ₹31,500 | 1,200 ₹25,200 | 1,000 ₹21,000 |
| 9.00 | M&L machine pressed precast coloured concrete interlocking paver blocks any shape and size confirming to IS 15658: 2006 of 60mm thick, M-35 laid and jointed with grey cement and pigment complete all as specified and directed. | 210 | Sqm | 800 ₹1.7 L | 1,000 ₹2.1 L | 100 ₹21,000 | 800 ₹1.7 L | 800 ₹1.7 L | 800 ₹1.7 L | 700 ₹1.5 L |
| 10.00 | M&L 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. | 5.25 | Cum | 220 ₹1,155 | 200 ₹1,050 | 500 ₹2,625 | 800 ₹4,200 | 200 ₹1,050 | 800 ₹4,200 | 400 ₹2,100 |
Updated dates
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
28 Jan 2026, 5:00 pmClosed
Col P Canon Anal CWE
HQ 134 Wks Engrs PIN- 914134 C/o 56 APO
Comprehensive BR repair replacement and other wks of HQ CIF K under AGE I CIF K
2025_MES_746636_1
134WE-98(T)/2025-26
Open Tender
Civil Works - Others
180 days
AGE (I) CIF (K)
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) CIF (K)
₹40,000
5 Feb 2026
31 Dec 2025
30 Jan 2026
31 Dec 2025
28 Jan 2026
14 Jan 2026
31 Dec 2025 - 7 Jan 2026
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws as specified complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
M&L Chequered cement concrete tiles 20cmx20cmx25mm thick as in path etc. set and jointed with grey cement and pigments as in floors and over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in leveling coarse of flooring complete all as specified and directed
M&L cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in coping, weathering, slightly rounded or chamfered angles and throating, benching complete all as specified and directed.
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in mass concrete and foundation filling complete all as specified and directed.
M&L machine pressed precast coloured concrete interlocking paver blocks any shape and size confirming to IS 15658: 2006 of 60mm thick, M-35 laid and jointed with grey cement and pigment complete all as specified and directed.
M&L 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.
Taking down cement plastering on stone wall/brick wall etc including racking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering on wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed.
M&L 15mm thick rendering on wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement complete all as specified and directed.
M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper and one coat of primer over 3mm thick wall care putty complete all as specified and directed.
M&L preparing new plastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.
M&L preparing old plastered or unplastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.
M&L non skid ceramic coloured tiles not less than 8mm thick 1st quality (square/rectangular) area of each exc 0.06 sqm but n exc 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface and over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
M&L Non skid white ceramic tiles not less than 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
M&L coloured glazed ceramic tiles (350x250x7mm/450x350x7mm) thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.
M&L vitrified ceramic tiles Light Shade not less than 10mm thick (square/rectangle) polished area of each tiles exc 42 sqm but not exc 1 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L vitrified ceramic tiles Light Shade not less than 10mm thick (square/rectangle) as in skirting polished area of each tiles exc 0.42 sqm but n exc 1 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking of shutters from the frame)of any description alongwith fittings not exceeding 1.5sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm and not exceeding 4 sqm each complete all as specified and directed.
S&F Anodised aluminium frame (Powder coated minimum thickness of powder coating 50 micron) for doors, window, partation wall with one or more rebates including joining cleat for fixing , rubber packing, anodised aluminum snap on beading for fixing glass panes in frame etc complete all as specified and directed.
S&F Anodised aluminium (Powder coated minimum thickness of powder coating 50 micron)door shutter, aluminum section weighting 0.55 kg/ m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.
S&F anodised aluminium (Powder coated minimum thickness of powder coating 50 micron)window, ventilator shutters fixed type with out sash bar, aluminium sction weighting 0.55 kg per sqm incl necessary jointing cleats, glazing , clips, rubber packing, anodised aluminum snap, beading, screws etc, complete all as specified and directed.
S&F brass mortice lock vertical type 100mm size 4 levers complete all as specified and directed.
M&L 4 mm thick Alumimium composite sheet with decorative colour and fixed with screw, or aluminium beading to aluminium frame complete all as complete all as specified and directed.
S&F door closer hydraulically regulated of cast iron body designation No 2, universal type , suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed.
Dismantling boarding /false ceiling of any description fixed in any position with nails complete all as specified and directed.
Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including supply & fixing of 4mm thick Non asbestos fibre cement building boards fixed or laid/inseted to timber/GI frame work complete all as specified and directed.
S&F 15mm thick 2nd class soft wood boarding as in wall panelling, plain one side and edges tonged and grooved or rebated, fixed with nails in any situation over 12 mm thick plyboard runner including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats upto satisfaction of AGE (I) complete all as specified and directed.
Dismantiling of water tanks of capacity exc 500 & n exc 1000 ltrs including all necessary fittings complete all as specified and directed.
S&F 1000 ltrs PVC rotational moulded polyethylene water storage tanks triple layer made (cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR part-I complete all as specified and directed.
S&F fixed in repairs 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 15mm ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Dismantiling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F mild steel Fe 410-W (Gde-E-250) quality-A Roof trusses ( framed), trused purlins , crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
M&L two coats of Synthetic enamel painting on new steel Surfaces of any description , over 10 cm in width or girth over a coat of red oxide primer complete all as specified and directed.
Notes :- An amount of Rs. 128620.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.35 MB
BOQ_836064.xls
BOQ • 3.21 MB
PS98.pdf
Tender Documents • 1.20 MB
Download all tender documents and submit your bid