Dismantling of E. I. and Fans, Fittings with conduit pipe, Electrical Panel with cable and Fire detection system of Hall No.1 in T. E. Bldg. at MIET, Meerut.

Supplying and fixing of following size of steel conduit along with accessories in surface/recess i/c painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm dia

25 mm dia

Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel conduit as required. (a) 2 x 1.5 Sq.mm

3 x 1.5 Sq.mm

4 x 1.5 Sq.mm

2 x 2.5 Sq.mm

2 x 4.0 Sq.mm

4 x 4.0 Sq.mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 5/6 Amp Switch

3 pin 5/6 Amp Socket

15/16 Amp Switch

6 pin 15/16 Amp Socket outlet

Supplying & fixing of 20-Watt 4-Feet LED Tubelight Batten (Cool White) complete with all accessories etc. as required. (M/s Philips / Syska & SS make)

S/Fixing following way distribution board made of sheet steel on surface/ recess having IP 42 & 43 protection double metal door complete with all standard accessories, inter connection i/c painting earthing etc. as required. (a) 4 Way TPN DB [M/s Legrand Cat No. 507670 or ss Make]

S/Fixing of following rating MCBs/Indication/Fuses in the existing MCB DB/Panel complete with connection, testing & commissioning etc. as required. (M/s Legrand make) (a) 5-32 Amp SP MCB –‘C’ Series

63 Amp Four pole Isolator

LED incication lamp Red/ Yellow

LED incication lamp Blue

HRC Fuse 63 Amp

Dismentalling of 6-32 Amp. MCB from existing panel & fixing the same in the existing MCB DB complete with connection, testing & commissioning etc. as required.

Supplying & Laying of 4 x 16 Sqmm PVC insulated PVC sheathed Al. conductor armored cable of 1.1 KV grade on surface / wall etc. complete as required.

Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (A) 4 X 16 sq. mm

Supply & Fixing of copper refrigerant pipe lines as suction and discharge length for 1.5 TR split A/C unit of i/c foam insulation etc. complete as required.

Charging of refrigerant Gas R-22 in the existing split AC units i/c Supplying cutting, vaccmization and also pressure testing with nitrogen etc. complete with connections, testing and commissioning etc. as required.

Supply & fixing of powder coated prefabricated mounting stand for out door unit made out of 18 SWG Powder coated M.s Sheet and perforated angle iron of suitable size i/c cutting, welding, painting and grouting etc. complete as reqd.

Supply & fixing of M.S angle iron frame made out of 35 mm x 35 mm x 5 mm thick M.S. angle for outdoor unit of split A.C / Change over Switch / TP&N Switch. i/c cutting, welding, painting and grouting etc. complete as required.

S.I.T.C of 4 zone microprocessor based wall mounted type MAIN/LOCAL control panel fabricated out of 1.6 mm CRCA sheet, dust and vermin proof, powder coated, suitable for operation on 200 Volt, 50 Hz. Ac supply consisting of 16x2 character LCD Alphanumeric dispaly, 1000 events logs, zone wise fire, open, short, isolate and normal LED indication, battery charger with battery and locking arrangement etc. complete as required. NOTE:- 1.The MAIN/MASTER Panel shall have facility to communicate all the events with local control panles/slave panel. 2. The dismantlling of existing panel, if any, shall be done at no extra cost.

I.T.C of FN 63Amp TPN switch disconnector fuse unit with HRC fuses, on the existing power room panel i/c making connection testing etc. as reqd.

I.T.C of 63 Amp four pole 'On Load' change over switch in Sheet steel enclosure i/c making connection etc. as reqd.

Shifting of optical detectors from switch room in T. E. Bldg. Boundry Road to T. E. Bldg. at MIET, Meerut. Including I.T.C etc complete as reqd.

Dismentling of existing LT panel & cabling etc of old A/C plant and Change over switch --1.0 No. from E/A set room in T. E. Bldg. shradhapuri

Shifting/Transportation of existing LT panel with cabling from Ist.Floor old A/C plant & Change over switch E/A set room in T. E. Bldg. shradhapuri to T. E. Bldg. MIET including loading - unloading and ITC of panel & minor repairing & painting of wall / floor etc complete as reqd.

Dismantling of existing copper wiring, fittings, fans, conduit pipe, change over switch, TPN DB and power cable, switch board, Electrical (AMF cum distribution panel)/ Fire panel & fire detection system in Hall no.-1 and two nos. outdoor unit of split A/C with piping & cabling i/c repairing & painting of wall & roof with desired colors etc as reqd.

Shifting (Loading -Unloading) of all dismantled material i.e. copper wiring, fittings, fans, conduit pipe, power cable, switch board, AMF cum distribution panel, Fire panel and detectors etc from T. E. Building MIET to Ist floor in T. E. Building at Shradhapuri Meerut.

M/s Mohit Engineers