Creation of Sub Stations along with HT/LT Lines for providing dedicated Power Supply to PHE Site at Kotla Malti

Amount

Laying of 11KV Line on 9 Mtr Long PCC Poles for PHE Station at Kotla Malti on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material

9.0 Mtr Long PCC Poles(WL-300Kg)

GI V-cross arm with top bracket including clamp

GI Channel X-arm, MS. angle, including clamps and braces

30mm² ACSR weasel Conductor

11KV Polymeric Composite Pin Insulator 12KV ,5KN Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

11KV Polymeric Composite disc Insulator 12KV ,Min. failling load 45 KN,

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200 x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

Anti climbing devise

Danger plates

Creation of 250KVA Sub Station for PHE Station at Kotla Malti on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material

11/0.433KV, 250 KVA( Coper wound) , 3-phase Distribution Transformers with Bimetallic Terminal Connectors, Energy Efficiency Level-2.

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 KV Horn Gap Fuse Set 3 Phase 200A

185 mm² Single-Core Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type

9Mtr ST Pole (SP410-SP33)

8Mtr ST Pole (SP410-SP15)

ACSR Weasel Conductor

11kV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps( Sizes and quantity as per Drawing No. F-2 of REC Construction Standards)

Galvinized Nuts and Bolts.

Earthing of substation -Earthing by GI Pipe 40mm or GI Rod 20mm 2.5 Mtr Long through GI Strip of 50 X 6 mm for Neutral earthing, 25 X 3mm for 2 Nos. Transformer body earthing as per J-2 REC Drawing. 1 No. LA Earthing 1 No. G.O Earthing Note:- For LA Earth 1 Pipe shall be kept seperatly

GI barbed wire for aniclimbing

11KV Polymeric Composite Pin Insulator 12KV ,5KN Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

11KV CT/PT ratio 30/5 Units(Dry Type) of various ratios including 3-Phase, 4-wire Trivector Meter and PVC Copper Control cable of required length and 3 Core HT XLPE cable 95sqmm ,2X10 Mtr=20mtr(Kiosk Type)(Complete Unit) including construction of Plate form

Sundary Items like Aluminium Bus Bar,Aluminium Lugs,Jumpers,Binding tapes etc

Pre fabicated LT switch

Supply & Fixing of Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete

Red Oxide

Aluminium paint

Cement bottoming 1,2,4 Mix as per REC standred 0.5 Cum/ pole

Danger Plate with Clamps

Creation of 100KVA Sub Station for PHE Station at Kotla Malti on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material

11/0.433KV, 100 KVA( Al. wound) , 3-phase Distribution Transformers with Bimetallic Terminal Connectors, Energy Efficiency Level-2.

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 KV Horn Gap Fuse Set 3 Phase 200A

185 mm² Single-Core Cable, (2 Ckt)1.1KV Grade, PVC Insulated Stranded Conductor FRLS type

9.0 Mtr Long PCC Poles(WL-300Kg)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps( Sizes and quantity as per Drawing No. F-2 of REC Construction Standards)

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 50 mm x 6 mm and 25mm X3mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials

11KV Polymeric Composite Pin Insulator 12KV ,5KN Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Pre fabricated LT switch

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200 x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete(As per R-APDRP Drawing)

LT Prodigy meter (40-200A)

Sundary Items like Aluminium Bus Bar,Aluminium Lugs,Jumpers,Binding tapes etc

Danger plates

Barbed Wire

HI-TECH TRANSFORMERS

ROCKEY SALES CORPORATION

M/S LUMEN ENGINEERS

COUNTRY CONSTRUCTION