PROVISION OF ADDITION ALTERATION REPAIRS TO CEILING PLASTER STRUCTURAL MEMBERS AND ELECTRIC WIRING SYSTEM IN P 1 BUILDING AND TEMPORARY SHEDS AT ICGAS RATNAGIRI

Amount

B/R Portion M & L for taking down cement plaster any description on on Laterite masonry or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.etc.all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or Laterite stone or concrete surfaces in celing in CM 1:4 finished even and smooth without using extra cement as specified and directed.

M&L rendering 10mm thick on Laterite stone masonry surfaces or surface other than fair face of brickwork or on one side of lathingwith CM (1:6) finished even and smooth with out using extra cement all as specified and directed.

M&L rendering 15mm thick in two layers, 5mm thick using WPC @3% by wt of cement over 10 mm thick on fair faces of Laterite stone masonry or concrete surfaces with CM (1:4) finished even and smooth with out using extra cement as specified and directed. Note :- WPC will be measured and paid separately.

Supply only integral water proofing compound conforming to IS 2645-1975, IS -9103 all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on old painted steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxid/zinc chrome as specified and directed.

M& L for taking down chowkhat or frame not exc 1.5 sq m each but with shutters ( without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.

S&F Solid FRP door frame of size 50mm x 47 mm made with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel FRP door shutter 30 mm thick (style) consisig of frame made out of MS tubes for Top & bottom rails shall be covered with heat moulded plaincolour FRP C channel having a PVC Sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour FRP sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottem rail ,panelling of plain colour FRP sheets to be fitted in the MS frame welded /sealed to the stiles & rails with suitable FRP sheets beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.

M& L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vetrified Ceramic tiles light shade for floor finish 10mm thick (square/rectangular) polished area of each tiles exc 0.36 sqm but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement match over 20mm screed bed 1:4 all as specified and directed.

M&L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., laid over 10mm thick back coat in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed.

M&L for non-skid ceramic coloured tiles (400x400)mm, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over 15mm screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement. all as specified and directed.

M&L for granite of 20mm thick (any type )of work (table rubbed and polished) in steps , jambs , pillars , window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1 :2) using marble dust with admixture of pigment to match with shade of granite.over 20mm screed bed 1:4 all as specified.

M&L for dismantling wall and ceiling boards (fibre, pulp, insulation , etc.) or insulation boards/ slabs/ blankets any thikness including cover filletsas specified and directed.

M & L for providing and fixing of PVC false ceiling consisting of 600mmx600mmx6mm thick plain PVC sheet used as panel insert in a frame work made using anodised aluminium T-section of sizes(25mmx25mmx1mm thick) in square pattern of grid sizes of (600mmx600mm). the aluminium framework is supported from the ceiling with the help of GI hook and GI wire/ 6mm MS rods of required sizes to maintain proper level etc. The aluminium frame work is supported on the wall side with use of aluminium L section of size (25mmx25mmx2mm) angles etc complete as per directions of Engineer-in-charge, manufacturers, specifications and drawings. (PVC ceiling Make: Rajshree or equivalent of sintex or polycon, Aluminium T and angle Make :- Hindalco, Indalco, Jindal or equivalent.)

S&F 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed all fitting fixture etc complete as specified and directed.

S&F 125 mm Aluminium handles, cast type, anodised all fitting fixture etc complete as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all fitting fixture etc complete as specified and directed.

M & L for Aluminium Door closer hydraucilly regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc Complele all as sprcified and directed.

M&L for taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified and directed

S&F in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipe.

S&F in repairs concealed stop cock with adjustable wall flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed.

S&F in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed.

S&F in repairs pillar taps, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shank and fly-nut, screws for iron pipe and fixed for 15mm dia of pipe complete all as specified and directed.

S&F in repair tubular towel rail, 20mm dia, brass chromium plated ,D type, 60cm long between flanges complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F flexible pipe 32mm dia as waste pipe all as specified and directed.

S&F Grating square 150mm size of PTMT(minimum weight 100gms).

S&F PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement in repair all as directed by Engr-in-charge

S & F CP brass health fauset complete all as specified and directed.

S&F in repairs, vitreous China counter wash basin, coloured, oval shape size 550x400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets. chromium plated waste coupling, plug and chain, and fitting in granite slab with proper moulding etc complete including pedestal all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F EWC, ivory, including seat cover, fitting etc. all as specified.

S&F in repair PVC low level flushing cistern including float valve, inlet, outlet, connection to flush pipe , PVC connection,flush pipe of polyethylene of low or high density or PVC. 32 mm dia, etc complete all as specified and directed.

M & L Vitreous China soap tray embedded in the wall all fitting fixture etc complete all as specified and directed.

S&F Paper holder with flap guard all fitting fixture etc complete all as specified and directed.

S&F 600x 450mm mirror with PVC frame and 5 mm thick glass with PVC sheet backing all as specified and directed.

M&L for dismantling CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

M& L for dismantling wrought iron or mild steel work of any description not otherwise provided for, all as specified and directed.

S& F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde E -250) quality A as specified and directed.

M& L for applying two coats of synthetic enamel paint on New painted steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxid/zinc chrome all as specified and directed..

S& F 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work etc. all as specified and directed.

Removing of building material( obtained from demolition items) up to 500 meters including loading ,unloading and staking at the distance all as specified and directed.

E/M Portion M& L for taking down carefully aluminium point wiring (light/fan/socket/ power) complete including fittings such as switches, sockets, ceiling roses etc but excluding light fittings and making good disturbed surfaces of wall all as specified and directed

M & L for point wiring using lSI marked 1.1 kV grade single core FR- LS flexible cable, conforming to IS: 694- 1990, having multi-drawn thin strands of electrolytic copper onductors, conforming.to IS: 8130-1984 and insulation conforming to IS: 5831-1984,for phase, neutral and earth continuity conductor same size as phase wire connecting to earth dolly, drawn in not less than 25 mm NB PVC medium grade concealed conduits, conforming to IS: 9537 (Part 3)- 1983, colourcoded as specified in IS: 11353-1985,including factory made sunken,galvanized, not less than 1.2 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to IS:14772- 2000 and suitable for modular cover-plates complete all as specified in IS: 732-1989 and directed. NOTE: 1. Circuit wire of size 2.5sqmm from DB to switch boards shall be included in quoted rate. 2. Cutting / chasesing of wall/plaster and making good to match with the adjoining surface shall be included in quoted rate. (a) One light point controlled by one switch with cables 1.5 sq.mm size

(b) One fan or exhaust fan point controlled by one switch with cables 1.5 sq.mm size

(c) One 6 A socket outlet,independent, with cables 1.5 sq.mm size.

(d) One 6 A socket outlet, on the same board with other switches, with cables 1.5 sq.mm size

All as per item No 56 here in before but with cable size 4 Sq mm for one 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed by Engr-in-Charge. Note: 1. Circuit wire of size 4sqmm from DB to switch boards shall be included in quoted rate. 2. Cutting /chasesing of wall/plaster and making good to watch with the adjoining surface shall be included in quoted rate.

S & F modular type 6 A one-way SP switch, ISI marked with finger proof terminal complete as specified and directed.

S & F modular type 3 pin combined shuttered type 6 A socket ISI marked complete as specified and directed.

S & F modular type 16 A one-way SP switch, ISI marked with finger proof terminal complete as specified and directed.

S & F modular type 6 pin combined shuttered type 6/16 A socket ISI marked complete as specified and directed.

S & F 6 A, 250 V high quality robust surface/ flush type polycarbonate/ PVC ceiling rose,ISI marked having 3 terminals, and outside diameter not less than 63.5 mm complete all as specified and directed.

S & F modular type 120 W step fan regulator of 2 module size, ISI marked complete as specified and directed.

Supply & Fix White cover plate with frame, 3 module complete all as specified and directed

Supply and fixing white plate cover with frame, 6 module complete all as specified and directed

Supply & Fix White cover plate with frame, 8 module complete all as specified and directed

Supply & Fix White cover plate with frame, 12 module complete all as specified and directed

Supply & Fix White cover plate with frame, 18 module complete all as specified and directed

M& L for taking down old u/s main switch/DBs/MCB DB with MCB and making good disturbed surfaces of wall all as specified and directed

S/F MCCB DB VERTICAL TYPE , suitable for 125 amps MCCB as incommer,made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , L&T /LEGRAND /Schneidar/ ABB (main DB).

S&F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 8 way Double door IP-43-IK09 protection grade

S&F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 way Double door IP-43-IK09 protection grade

Supply and Fixing 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 10 KA.Thermal release (Incommer)

Supply and fixing SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.10 KA rating (Make: Havells /Schneider/legrand)

Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.10 KA rating (Make: Havells /Schneider/legrand)

Supply and fixing SP 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.10 KA rating (Make: Havells /Schneider/legrand)

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissionin complete all as specified and directed.

M& L for taking down old u/s light fittings of any type complete complete all as specified and directed.

Supply and fixing LED lights fitting 1x 16W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED Flood light 200W 230 V AC outdor type with tharmal managment in multipal optics and IP 66 protection with complalete accessories and all as specified and directed.

M&L for Lamp holder with LED lamp 10 watts , PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type.

S& F refixing LED lights 2'x2' 36 W with complete accessories and all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complet with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with suitable size .

Taking down fan, cealing cable end, dismantling blades and removing fan and deposite the store.

Hanging only ceiling fan/exhaust fan 230V, 1200/1400 mm sweep with complete accessories and all as specified and directed.

Supply & fixing ceiling fans complete withblades, down rods, electronic type regulator and accessories 230V, 1200 mm sweep. all as specified and directed .

S&F Exhaust fan AC single phase 230 volts of size 380 mm sweep steel body with louver shutter providing holes including grouting nut bolts complete all as specified and directed at site

M & L for taking down old u/s sub main/service copper/aluminium cable any size.

M & L for submain wiring using lSI marked 1.1 kV grade single core FRLS,flexible cable, conforming t.o IS: 694- 1990, having multi- drawn thin strands of electrolytic copper conductors and insulation conforming to IS: 5831- 1984, type C, HR 85° C + FR for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25 mm NB PVC medium grade surface/recessed conduits, confonning to IS: 9537 Part- 3, colour- coded as specified in IS: 73- 1989, including making good of disturbed surfaces of wall / ceiling / floor, all complete as specified and directed. NOTE: 01 run of phase conductor, 01 run of neutral conductor, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length (a) 2 X 4.0 mm2 + 1 X 4.0 sq.mm earth wire. Note Cutting/chasesing of wall plaster and making good to match with the adjoining surface shall be included in quoted rate.

M & L for submain wiring using lSI marked 1.1 kV grade single core HRFR,flexible cable, conforming t.o IS: 694- 1990, having multi- drawn thin strands of electrolytic copper conductors and insulation conforming to IS: 5831- 1984, type C, HR 85° C + FR for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25 mm NB PVC medium grade surface/recessed conduits, confonning to IS: 9537 Part- 3, colour- coded as specified in IS: 73- 1989, including making good of disturbed surfaces of wall / ceiling / floor, all complete as specified and directed. NOTE: 1) 01 run of phase conductor, 01 run of neutral conductor, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length. 2) Cutting/chasesing of wall plaster and making good to match with the adjoining surface shall be included in quoted rate.(a)2x6.0 sq. mm +1x6.0 sq. mm earth wire.

M & L for submain wiring using lSI marked 1.1 kV grade single core HRFR,flexible cable, conforming t.o IS: 694- 1990, having multi- drawn thin strands of electrolytic copper conductors and insulation conforming to IS: 5831- 1984, type C, HR 85° C + FR for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in not less than 25 mm NB PVC medium grade surface/recessed conduits, confonning to IS: 9537 Part- 3, colour- coded as specified in IS: 73- 1989, including making good of disturbed surfaces of wall / ceiling / floor, all complete as specified and directed. NOTE: 01 run of phase conductor, 01 run of neutral conductor, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length (a) 2 X 10 sqmm + 1 X 10 sq.mm earth wire. Note: Cutting/chasesing of wall plaster and making good to match with the adjoining surface shall be included in quoted rate.

M&L for taking down old u/s service UG cable any size

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor with lugs as per sutable size following of size cable all as specified or indicated including testing on completion:- (a) 95 sqmm x 3.5 core

(b) 50 sqmm x 3.5 core

(c) 35 sqmm x 3.5 core

(d) 25 sqmm x 3.5 core

(e) 10 sqmm x 4 core

(f) 10 sqmm x 2 core

Excavation in trenches in soft/disintegrated soil/ rocks not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, leveling, watering and well ramming excavated soft/disintegrated soil/rocks in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site Hard rocks shall be broken in small pieces before refilling).

Removing excavated surplus soft/disintegrated soil/ rock obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

M&L, dry, unwashed sand filled in trenches / ducts for cushioning to cable including punning complete all as specified. Note : The depth of sand cushion after punning shall be measured.

Supplying and laying un-reinforced pre cast concrete cable cover of class LV type 1 flat size 250 mm x 150 mm x 40 mm fixed in replacement of any type bricks or PCC covers completed as specified and directed.

Supply and fix galavanised steel tubes, light grade as cable protection laid on trench/floor fixed on pole/wall etc of 50 mm as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised steel earth trip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

M&L earthing complete with copper earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to copper earth trip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

Supply & fix Copper strip 32x6 mm as earth continuity conductor fixed on wall with PVC insulated back plate at 1 meter distance with nuts and bolts including provision of holes on strips for taping earthing complete all as specified and directed.

Taking down sheet enclouer box with including all fittings complete all as directed.

S & F Sheet encloser box Double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps .

S & F Sheet encloser box with 63Amps MCCB 4 pole with lugs cannection complete with all as specified or indicated including testing on completion.

S&F Automatic servo controller voltage stabilizer 75 kva conforming to BIS 9815 Part-I 1994 reaffirme 2009) unbalanced type (indusal phase control), 3 Phase, 50Hz naturally oil cooled, copper wound, indoor type with digital disply, relay free smooth and silent oprestional fist filling of tranfamer oil complete, the output voltage range 415+ 1% (Phase to phase) 240V + 1 % (PHASE AND NEUTRAL). The following additional protection may also be provided:- a) Overload/short circuit protection b ) High/low voltage cut off. c) by pass arrangement in case of emergency. d) Single phase sequence change.

Excavation in trenches in soft soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottomm surface all as specified and directed at site.

Advait Enterprises

jkconstruction

Modern Engineering Co

K M SUBHANAIAH